Motorola P880 Configuring Physical Port Parameters on Fast Ethernet Ports, Port Pace, Priority

2

	Table 9. Gigabit Port Parameters
Parameter	Definition
Port PACE	Determines if the port detects 3Com’s copyrighted
Priority	PACE format as packets pass through the port.
	PACE allows a packet’s priority (higher priority
	packets move through the switch faster) to be set
	at the adapter.
Remote	Proprietary mechanism to detect remote link
Fault Detect	errors on Cajun gigabit ports. The default is
	Disabled.
	The remote fault detection functionality should be
	enabled (on both ends of a Cajun to Cajun link) in
	two cases:
	• When two Cajun gigabit ports are connected
	that do not support auto-negotiation.
	• When a Cajun gigabit port that does not support
	auto-negotiation is connected to a Cajun gigabit
	port that does support auto-negotiation.

Configuring Physical Port Parameters on Fast Ethernet Ports

To configure ports on a Fast Ethernet module:

1.In the System Configuration section of the Web Agent window, select Modules & Ports. The Module Information dialog box opens.

2.In the Ports column, click the number for the module you want to configure (for example, 10 for 100BASE-FX). The Physical Port Configuration dialog box opens.

3.Click the Enable check box to enable a port, or if the check box is enabled, click the Enable check box if you want to disable the port.

4.Click APPLY to save your changes, or CANCEL to restore previous settings.

5.In the Name field, click the port name to set additional parameters. The Detailed Physical Port Configuration dialog box opens.

Refer to Table 10 for more information on the Fast Ethernet (10/ 100) parameters.

6.In the Name field, enter a port name.

2 - 12 Cajun P880 Routing Switch Installation Guide