Motorola P880 manual Installing Switch Elements/Switch Controllers

1

6.Insert the module into the selected slot. The slots have guides to ensure proper insertion (Figure 12). Determine the correct slot for installing the new card.

Figure 12. Installing Switch Elements/Switch Controllers

ESD

Jack

7.Push in on the Ejector/Locking Tabs until they click to lock the card into place.

8.To remove a card, squeeze Ejector/Locking Tabs and pull outward. Once the card releases, pull it carefully toward you until it clears the guide.

9.Replace the rear panel of the switch. You will feel slight resistance as you push the panel into place.

10.Re-insert the rear panel and tighten the captive screws.

11.Restart the Cajun P880 Switch and log in.

See "Configuring Redundant Hardware," in Chapter 2 for information on configuring the controllers and elements.

1 - 22 Cajun P880 Routing Switch Installation Guide