Selecting a Location

The location you select for installing the system hardware must meet the following requirements:

19-inch EIA-standard grounded rack or table capable of supporting at least 154 kg (340 lb). A fully-loaded switch weighs 77 kg (170 lbs).

At least 2 inches (5.2 cm) on either side of the chassis, and from the front and rear of the chassis, to allow adequate airflow through the chassis (Figure1).

Figure 1. Air Flow Requirements

AC power source(s) within 2 m (9 ft) (separate sources, on separate circuits, if you require maximum fault tolerance)

Ambient temperature between 0°C and 40°C (32°F to 104°F)

Relative humidity less than 95%, non-condensing

Cajun P880 Routing Switch Installation Guide

1 - 3

Page 13
Image 13
Motorola P880 manual Selecting a Location, Air Flow Requirements