8.Click APPLY to save your changes, or CANCEL to restore previous settings.

Setting One-TimeTo set Summer Time Hours that are not based on a standard rule:

Summer Time Hours

1.In the System Information section of the Web Agent window, click System Clock. The System Clock dialog box opens.

2.In Clock Options, click Summer Time Hours Algorithm. The Summer Time Hours Configuration box opens.

3.From the Enable State pull-down menu, select Enable.

4.In the Offset cell of the Value column, enter the reset value for the clock in minutes.

For example, if you intend to reset the clock forward or backward by one hour, retain the default value of 60 minutes.

5.Click One-Time.

*Note: The Web Agent enables you to select the boxes next to both Recurring and One-time Summer Time Hours. However, the option to set both Recurring and One-time hours is not provided.

6.Use Table25 to configure Summer Time Hours on a one-time basis.

Table 25. One-Time Summer Time Hours Configuration

Parameter

Definition

 

 

One-time

Select if Summer Time Hours change one time, such

 

as on a specified date.

 

When you select one-time Summer Time Hours, you

 

indicate the time and date on which Summer Time

 

Hours begin and end.

 

 

Start

Specifies the start of Summer Time Hours.

 

 

End

Specifies the end of Summer Time Hours.

 

 

Cajun P880 Routing Switch Installation Guide

2 - 43

Page 77
Image 77
Motorola P880 manual Click One-Time, One-time