Frigidaire FGGF3032MF, FGGF3032MB, FGGF3032MW manual Setting Oven Controls, Setting the clock

Page 14

SETTING OVEN CONTROLS

Setting the clock

When the appliance is first powered up or when the power supply to the appliance has been interrupted and restored, the display will flash the time of day. Be sure to set the clock with the correct time of day before using the oven.

To set the clock when the display is flashing:

1.Press once. "CLO" will appear in the display.

2.Within 5 seconds, adjust the time by pressing the or and release the keypad when the correct time

displays. The new setting will accept in 5 seconds.

To adjust the clock when the display is not flashing:

1.Press keypad twice (do not hold keypad down). "CLO" will appear in the display.

2.Within 5 seconds, adjust the time by pressing the or and release the keypad when the correct time displays. Any adjustments made will accept in 5

secondsNOTE.

The clock cannot be set or adjusted when the oven is active including self-clean.

Changing between continuous bake setting or 12-Hour Energy Saving feature

The oven control has a built-in 12-Hour Energy Saving feature that will shut off the oven if the control is left on for more than 11 hours and 59 minutes. The oven may be programmed to override this feature for continuous baking.

Changing to continuous bake setting:

1. Press and hold

keypad for 5 seconds until a

tone sounds. " — — hr" will appear in display for continuous cooking. The current time of day will return to the display.

2.To cancel the continuous bake setting, press and hold keypard for 5 seconds until a tone sounds.

"12hr" will appear in display indicating that the control has returned to the 12-Hour Energy Saving feature.

NOTE

Changing between continuous bake or 12-Hour Energy savings mode does not change how the cooktop operates.

Changing temperature display mode (°F or °C)

The oven control is factory preset to display the oven temperature with Fahrenheit (°F) values. The control may be changed to display either Fahrenheit or Celsius

temperatures.

To change the temperature to display Celsius (°C) or Fahrenheit (°F):

1. Presskeypad. "— —" appears in the display.

2. Press and hold the

keypad until "HI" appears in

the display.

3.Press and holdkeypad until °F or °C appears in the display.

4. Press the

or

keypad to change °F to °C or °C

to °F.

5. Press any keypad to return to normal operating mode.

NOTE

The temperature display mode cannot be changed when the oven or self-clean is active.

Setting for audible or silent keypad operation

Normally a beep will sound each time a keypad is pressed. If desired, the oven control may be set for silent keypad operation.

To set for silent operation:

Press and hold the keypad until the control beeps

once (about 7 seconds). This will block the controls from sounding when a keypad is pressed in the future.

To set for audible operation:

Press and hold the keypad until the control beeps once (about 7 seconds).

NOTE

When the control is set for silent keypad operation the timer, preheat and any end of cycle or any error tone alerts will remain audible.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Use&Care Contents Product Record and RegistrationDefinitions Tip Over HazardImportant Safety Instructions Important Instructions for Using Your Oven Important Safety NoticeGrounding Instructions Conversion to Liquefied Petroleum GasOven racks Before Setting Oven ControlsOven vent location Oven rack stopBaking layer cakes with 1 or 2 oven racks Types of oven racksAir circulation in the oven Special dark coating on the left and right rack Effortless Oven Rack systemTo assemble the Effortless Oven Rack system Cookware material types Before Setting Surface ControlsCorrect flame Setting Incorrect Flame setting Set proper burner flame sizeDo not clean griddle in the dishwasher Check for proper burner cap placementUsing the griddle Before first useSetting a surface burner Setting Surface ControlsSetting surface controls Home CanningRead the Instructions Carefully Before Using the Oven Oven Control FunctionsChanging temperature display mode F or C Setting Oven ControlsSetting the clock Setting for audible or silent keypad operationSetting lock feature Setting the timerBake time Setting bakeTo change the oven temperature after bake has started To set bakeWhen the set bake time runs out Start timeSuggestions for quick bake Setting quick bakeHow quick bake works Minimum internal cooking temperatures Easy probeEasy probe cont’d Proper probe placement in foodProbe error message To set easy probeTo set broil Suggested broil settings table gas ovenBroil Operating the oven light Adjusting the oven temperatureTo adjust oven temperature Read before starting self-clean SELF-CLEANINGPreparing for self-clean Clean Do notWhen the self-clean cycle ends Setting cleanTo set self-clean Restarting self-clean after a power failureSetting self-clean with start time To set self-clean with delay start instructionsCare & Cleaning Cleaning recommendation tableCleaning the cooktop and surface burners Replacing interior oven light Aluminum foil and oven linersAluminum foil and oven liners cont’d To replace oven door Removing and replacing the lift-off oven doorTo remove oven door Setting Oven Controls section Problem Possible Causes SolutionsBlock the oven vent area when cooking Oven Controls sectionSolutions to common problems Before YOU Call Problem Possible Causes Solutions Bake or self-clean Under Self-cleaningSetting Surface Controls Put water or flour on the fire! Flour may be explosivePage Page Major Appliance Warranty Exclusions This warranty does not cover the following
Top Page Image Contents