Frigidaire FGGF3032MW, FGGF3032MB, FGGF3032MF manual Setting self-clean with start time

Page 25

Setting self-clean with start time

You may add start time instructions to the self-clean feature, which will automatically start clean at a later time.

IMPORTANT

Immediately after setting clean using start time instructions the oven door will start to lock. Check to be sure the oven is completely empty before setting clean with start time. Be aware that the clean feature will not start heating the oven for cleaning until the time of day reaches the set starting time

If clean was set and any items remain inside the oven, you will need to remove them before clean begins the heating portion of the cycle.

Press cancel to stop self-clean and wait for the oven door to unlock. Once unlocked, remove any items from the oven, close the oven door and set for self-clean again.

To set self-clean with delay start instructions:

1.Remove all items from the oven interior, cooktop, storage drawer (some models) or warmer drawer (some models), all oven racks from the oven and be sure the oven door is completely closed.

2.Press thekeypad. The ":" in the time of day

 

display will flash.

 

 

3.

Press and hold the

keypad to scroll to the time to

 

start the self-clean cycle. Release the keypad when

 

the desired start time is displayed.

4.

Press the

keypad. "---" appears in the display.

5.

To start press the

or

keypad once. "3:00" will

 

appear in the display indicating that a 3 hour self-

 

clean time is set. To change to a shorter 2 hour self-

 

clean time press the

 

keypad once ("2:00" will

 

appear in the display indicating a 2 hour clean time is

 

desired).

 

 

 

6."CLn" will appear in the oven display during the clean cycle and the "door locked" indicator light will remain ON until the cleaning cycle is complete or

cancelled and the oven temperature has cooled.

To stop self-clean at any time press keypad.

SELF-CLEANING

CAUTION

To avoid possible burns use care when opening the oven door after the self-clean cycle is finished. Stand to the side of the oven when opening the oven door to allow any hot air or steam to escape.

When the self-clean cycle ends:

•The time of day will appear in the oven display and the "clean" and "door locked" indicator lights will continue to glow.

•Once the oven has cooled down for about 1 hour and the "door locked" light has turned off, the oven door may be opened.

•Wait until the oven is completely cool, then wipe away any residue or powdered ash from the oven interior using a clean damp cloth or paper towel.

NOTES

•The maximum start time setting with the self-clean feature is 11 hours & 59 minutes.

•Check to be sure the oven is empty before setting a self-clean cycle with a delayed start setting. Immediately after setting self-clean with a start time the oven door will lock, however, the self-clean feature will not start heating the oven for cleaning until reaching the delay start time.

•On models equipped with cooktop lockout the cooktop will also lock.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Use&Care Product Record and Registration ContentsTip Over Hazard DefinitionsImportant Safety Instructions Important Safety Notice Important Instructions for Using Your OvenConversion to Liquefied Petroleum Gas Grounding InstructionsOven vent location Before Setting Oven ControlsOven racks Oven rack stopAir circulation in the oven Types of oven racksBaking layer cakes with 1 or 2 oven racks To assemble the Effortless Oven Rack system Effortless Oven Rack systemSpecial dark coating on the left and right rack Correct flame Setting Incorrect Flame setting Before Setting Surface ControlsCookware material types Set proper burner flame sizeUsing the griddle Check for proper burner cap placementDo not clean griddle in the dishwasher Before first useSetting surface controls Setting Surface ControlsSetting a surface burner Home CanningOven Control Functions Read the Instructions Carefully Before Using the OvenSetting the clock Setting Oven ControlsChanging temperature display mode F or C Setting for audible or silent keypad operationSetting the timer Setting lock featureTo change the oven temperature after bake has started Setting bakeBake time To set bakeStart time When the set bake time runs outHow quick bake works Setting quick bakeSuggestions for quick bake Easy probe Minimum internal cooking temperaturesProbe error message Proper probe placement in foodEasy probe cont’d To set easy probeBroil Suggested broil settings table gas ovenTo set broil To adjust oven temperature Adjusting the oven temperatureOperating the oven light Preparing for self-clean SELF-CLEANINGRead before starting self-clean Clean Do notTo set self-clean Setting cleanWhen the self-clean cycle ends Restarting self-clean after a power failureTo set self-clean with delay start instructions Setting self-clean with start timeCleaning recommendation table Care & CleaningCleaning the cooktop and surface burners Aluminum foil and oven liners cont’d Aluminum foil and oven linersReplacing interior oven light To remove oven door Removing and replacing the lift-off oven doorTo replace oven door Block the oven vent area when cooking Problem Possible Causes SolutionsSetting Oven Controls section Oven Controls sectionSolutions to common problems Before YOU Call Under Self-cleaning Problem Possible Causes Solutions Bake or self-cleanPut water or flour on the fire! Flour may be explosive Setting Surface ControlsPage Page Exclusions This warranty does not cover the following Major Appliance Warranty
Top Page Image Contents