Sherwood R-865 manual Loading Batteries, Remote Control Operation Range

Page 18

ENGLISH

OPERATING COMPONENTS WITH REMOTE CONTROL

Enter the setup code for each component

1 other than this receiver you wish to control. For details, refer to “Entering a setup code” on page 19.

Turn on the component you want to

2 operate.

Press the DEVICE button on the remote

3 control corresponding to the component you wish to operate.

Aim the remote control at the REMOTE

4 SENSOR of the component you wish to control and press the button corresponding to the operation you want.

•When operating a Sherwood CD player or tape deck using digi link system remote control, aim the remote control at the REMOTE SENSOR of this receiver.

However, to operate a Sherwood DVD player, aim at the REMOTE SENSOR of the corresponding component.

REMOTE CONTROL OPERATION RANGE

•Use the remote control unit within a range of about 7 meters (23 feet) and angles of up to 30 degrees aiming at the remote sensor.

 

7m

30

30

LOADING BATTERIES

•When the remote control does not operate, the old batteries should be replaced. In this case, load new batteries within several minutes after removing old batteries.

•If the batteries are removed or have been exhausted for a longer period of time, memorized contents will be cleared. Should this happen, you should memorize them again.

Remove the cover.

1

2

Load four batteries(“AAA” size) matching

the polarity.

+

+

•Remove the batteries when they are not used for a long time.

•Do not use the rechargeable batteries.

•Be sure to use alkaline batteries.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents 865 Introduction Read this Before Operating Your UnitSafety Instruction Contents Connecting Antennas System ConnectionsConnecting Audio Components Component video input default settings Component in 1 Video 1, Component in 2 VideoDigital input default settings VideoConnecting System Control Surround speakers a and B Surround back speakersSpeaker placement Front left and right speakers and center speakerRoom 2 connections Main room Another roomRoomConnecting Microphone Remote Sensor Front Panel ControlsDolby PL II Music Parameter Fluorescent DisplayFluorescent Display Universal Remote Controls LCD ScreenFunction Table of the Numbered Buttons Device to be ControlledRemote Control Operation Range Loading BatteriesUsing Functions of Remote Control Entering a setup codeLearn Delete Macro Code Punch Searching a setup code Programing the commands from other Remote controls Learning modeProgrammed under a device mode Erasing the programmed commandErasing all the commands From one buttonTo erase a macro program Programming a macro functionOperating a macro function To change a macro programCD Delete DVD VCR AUX Programing a punch-through functionAudio Delete TV TV Delete SAT Cable VCROperating a punch-through function Erasing the programmed puch-through functionVOL Delete Play CH English Room 2 Remote Controls Volume UP/DOWN ButtonsBefore operation OperationsListening to a Program Source Tuner CD AUXWhen CD, AUX or Video 1~ Video 4 is selected Adjusting the tone bass and trebleDigital Analog Muting the sound Listening with the headphones Surround Sound Surround modesTheater Front L/R Center Enjoying Surround Sound PL II Music2CH downmix mode To listen in a Dolby Pro Logic IIx modeTo listen in a Dolby Virtual Speaker mode Selecting the surround back channel mode as connected To listen in a Dolby Headphone modeAdjusting each channel level with test tone Adjusting the current channel levelsAdjust the level of the selected channel as Desired Auto tuning Manual tuningAuto presetting Manual presetting Tuning to preset stationsScanning preset stations in sequence Listening to FM stereo broadcastsRecording with Tape Monitor Dubbing the sound and image signalsRecording Dubbing from video components ontoDigital Audio Recording with MD Recorder Other Functions Compressing the dynamic rangeDolby Digital sources only Entering a label Correcting or clearing a labelRoom 2 Source Playback Using the OSD OSD Menu SettingsCurrent Status Display When selecting the Power AMP Assign Setting the Power AMP Assign Setting the Speaker SetupWhen selecting the Speaker Configuration English When selecting the Speaker Distance DownWhen selecting the Virtual Speaker Setup When selecting the Subwoofer When selecting the Subwoofer Mode When selecting the CrossoverWhen selecting the Auto Speaker Setup PreparationsTo confirm the results, press the Cursor Left /RIGHT Setting the System Setup When selecting the Digital Input SetupWhen selecting the Tone Control When Cinema EQ mode is selectedWhen Tone Defeat mode is selected When selecting the OSD Auto Display When selecting the Current VideoWhen selecting the Component Video Setup When selecting the Video 2 OUT When selecting the DC Trigger Setup When the DC Trigger mode is set to OnWhen selecting the A/V Sync Setting the Surround Setup When Decoding Mode is selectedWhen the Surround Mode is selected When the Dolby surround mode is selectedWhen the Dynamic Range is selected When selecting the Panorama mode When selecting the Center Width controlWhen selecting the Dimension control Setting the CH Level Setup When selecting the Preset 1 orWhen selecting the Preset 1 Trim or Preset 2 Trim When selecting the Channel Level Trim When selecting the LFE Level Trim Setting the ROOM2 Feed Setup When selecting the Volume ModeWhen selecting the Room 2 Feed mode When the Room 2 Feed mode is set to OnTroubleshooting Guide Problem Possible Cause RemedySpecifications Amplifier SectionDigital Audio Section Setup Code Table TMK RCASSS CCESTS KLHMEI ABC NSCSAT HTSNSM DKKMCS QED865

R-865 specifications

The Sherwood R-865 is a remarkable audio receiver that encapsulates the essence of home audio entertainment. Belonging to the renowned Sherwood brand, this model is a perfect blend of vintage aesthetics and modern engineering, making it a prized addition for audiophiles and casual listeners alike.

At the heart of the Sherwood R-865 lies its powerful amplification section, designed to deliver exceptional sound quality and maintaining audio fidelity across various frequencies. The receiver supports 5.1 channel surround sound, making it an ideal choice for those who enjoy immersive audio experiences in their home theater setups. With a power output of up to 100 watts per channel, the R-865 can easily drive a variety of speaker systems, resulting in detailed sound reproduction that brings movies, music, and games to life.

One of the standout features of the R-865 is its advanced digital signal processing capabilities. This technology not only enhances audio clarity but also ensures that users can enjoy an optimized sound experience tailored to their room's acoustics. The inclusion of multiple sound modes further allows listeners to choose settings that suit different genres of music or types of content, whether it be movies, music, or sports.

Connectivity is another strong point for the Sherwood R-865. It offers a variety of inputs, including HDMI, optical, and coaxial ports, ensuring compatibility with a wide range of sources such as Blu-ray players, gaming consoles, and streaming devices. Additionally, it features built-in Bluetooth technology, allowing users to stream their favorite songs directly from smartphones or tablets without the hassle of wires.

The receiver's user interface is designed with convenience in mind. The LCD display makes it easy to navigate through settings and inputs, while the remote control provides users with extensive control options from the comfort of their couch. For those who appreciate the aesthetics of home audio equipment, the Sherwood R-865 also sports a timeless design with clean lines and a classic finish that complements any home décor.

Moreover, the R-865 offers a robust equalizer feature, enabling users to fine-tune audio outputs to match their unique listening preferences. The receiver also includes various safety features such as short-circuit protection and thermal overload safeguards, ensuring reliable operation over long periods.

In summary, the Sherwood R-865 audio receiver packs a punch with its state-of-the-art audio technologies, versatile connectivity options, and user-friendly design. Whether you’re throwing a movie night or hosting a listening party, this receiver stands ready to deliver an unparalleled audio experience that everyone can enjoy.
Top Page Image Contents