Sherwood R-865 Adjusting each channel level with test tone, Adjusting the current channel levels

Page 37

Adjusting each channel level with test tone

The volume level of each channel can be adjusted easily with the test tone function. Note: When speakers are switched off , the test tone function does not work.

Enter the test tone mode.

1

The test tone will be heard from the speaker of each channel for 2 seconds as follows:

 

FL

FC

FR

SR

 

 

 

 

 

 

 

 

 

 

Front Left

Center

Front Right

Surround Right

 

 

 

SUB

SL (

SC)

or (

 

B L

BR)

 

 

 

 

SUBwoofer

Surround Left (Surround Center)

(Surr. Back Left

Surr. Back Right)

Depending on the speaker setting(None or No), the test tone of the corresponding channel is not available.

( ): possible depending on whether the surround back channel is set to 2 CH or 1 CH.

ENGLISH

At each channel, adjust the level as desired

2 until the sound level of each speaker is heard to be equally loud.

or

DOWNUP

You can select the desired channel and adjust its

level with repeating the steps and in

“Adjusting the current channel levels” procedure.

Cancel the test tone function.

3

Adjusting the current channel levels

After adjusting each channel level with test tone, adjust the channel levels either according to the program sources or to suit your tastes.

If you have performed the CH LEVEL SETUP procedure on the OSD menu, you can memorize the adjusted channel levels into preset memory(PRESET 1, PRESET 2) and recall the memorized whenever you want. (Refer to “SETTING THE CH LEVEL SETUP” on page 66.)

Select the desired channel.

1

or

Each time this button is pressed, the corresponding

channel is selected as follows:

FRONT-L FRONT-C FRONT-R SURR-R

SUBWOOFER SURR-L ( SURR-C) or (BACK-LBACK-R)

Depending on the speaker settings and surround mode, etc., some channels cannot be selected.

( ): possible depending on whether the surround back channel is set to 2 CH or 1 CH.

Note: When speakers are switched off, only FRONT-L and FRONT-R channels can be selected.

37

Image 37
Contents 865 Read this Before Operating Your Unit IntroductionSafety Instruction Contents System Connections Connecting AntennasConnecting Audio Components Component in 1 Video 1, Component in 2 Video Component video input default settingsVideo Digital input default settingsConnecting System Control Surround back speakers Surround speakers a and BFront left and right speakers and center speaker Speaker placementMain room Another roomRoom Room 2 connectionsConnecting Microphone Dolby PL II Music Parameter Front Panel ControlsRemote Sensor Fluorescent DisplayFluorescent Display LCD Screen Universal Remote ControlsDevice to be Controlled Function Table of the Numbered ButtonsLoading Batteries Remote Control Operation RangeEntering a setup code Using Functions of Remote ControlLearn Delete Macro Code Punch Searching a setup code Remote controls Learning mode Programing the commands from otherErasing all the commands Erasing the programmed commandProgrammed under a device mode From one buttonOperating a macro function Programming a macro functionTo erase a macro program To change a macro programAudio Delete TV Programing a punch-through functionCD Delete DVD VCR AUX TV Delete SAT Cable VCRErasing the programmed puch-through function Operating a punch-through functionVOL Delete Play CH English Volume UP/DOWN Buttons Room 2 Remote ControlsListening to a Program Source OperationsBefore operation Tuner CD AUXAdjusting the tone bass and treble When CD, AUX or Video 1~ Video 4 is selectedDigital Analog Muting the sound Listening with the headphones Surround modes Surround SoundTheater Front L/R Center PL II Music Enjoying Surround SoundTo listen in a Dolby Pro Logic IIx mode 2CH downmix modeTo listen in a Dolby Virtual Speaker mode To listen in a Dolby Headphone mode Selecting the surround back channel mode as connectedAdjusting the current channel levels Adjusting each channel level with test toneAdjust the level of the selected channel as Desired Manual tuning Auto tuningAuto presetting Tuning to preset stations Manual presettingListening to FM stereo broadcasts Scanning preset stations in sequenceRecording Dubbing the sound and image signalsRecording with Tape Monitor Dubbing from video components ontoDigital Audio Recording with MD Recorder Compressing the dynamic range Other FunctionsDolby Digital sources only Correcting or clearing a label Entering a labelRoom 2 Source Playback OSD Menu Settings Using the OSDCurrent Status Display When selecting the Power AMP Assign Setting the Speaker Setup Setting the Power AMP AssignWhen selecting the Speaker Configuration English Down When selecting the Speaker DistanceWhen selecting the Virtual Speaker Setup When selecting the Subwoofer When selecting the Crossover When selecting the Subwoofer ModePreparations When selecting the Auto Speaker SetupTo confirm the results, press the Cursor Left /RIGHT When selecting the Digital Input Setup Setting the System SetupWhen Cinema EQ mode is selected When selecting the Tone ControlWhen Tone Defeat mode is selected When selecting the Current Video When selecting the OSD Auto DisplayWhen selecting the Component Video Setup When selecting the Video 2 OUT When the DC Trigger mode is set to On When selecting the DC Trigger SetupWhen selecting the A/V Sync When Decoding Mode is selected Setting the Surround SetupWhen the Dolby surround mode is selected When the Surround Mode is selectedWhen the Dynamic Range is selected When selecting the Center Width control When selecting the Panorama modeWhen selecting the Dimension control When selecting the Preset 1 or Setting the CH Level SetupWhen selecting the Preset 1 Trim or Preset 2 Trim When selecting the Channel Level Trim When selecting the LFE Level Trim When selecting the Volume Mode Setting the ROOM2 Feed SetupWhen the Room 2 Feed mode is set to On When selecting the Room 2 Feed modeProblem Possible Cause Remedy Troubleshooting GuideAmplifier Section SpecificationsDigital Audio Section Setup Code Table SSS RCATMK CCEKLH STSMEI NSC ABCHTS SATMCS DKKNSM QED865

R-865 specifications

The Sherwood R-865 is a remarkable audio receiver that encapsulates the essence of home audio entertainment. Belonging to the renowned Sherwood brand, this model is a perfect blend of vintage aesthetics and modern engineering, making it a prized addition for audiophiles and casual listeners alike.

At the heart of the Sherwood R-865 lies its powerful amplification section, designed to deliver exceptional sound quality and maintaining audio fidelity across various frequencies. The receiver supports 5.1 channel surround sound, making it an ideal choice for those who enjoy immersive audio experiences in their home theater setups. With a power output of up to 100 watts per channel, the R-865 can easily drive a variety of speaker systems, resulting in detailed sound reproduction that brings movies, music, and games to life.

One of the standout features of the R-865 is its advanced digital signal processing capabilities. This technology not only enhances audio clarity but also ensures that users can enjoy an optimized sound experience tailored to their room's acoustics. The inclusion of multiple sound modes further allows listeners to choose settings that suit different genres of music or types of content, whether it be movies, music, or sports.

Connectivity is another strong point for the Sherwood R-865. It offers a variety of inputs, including HDMI, optical, and coaxial ports, ensuring compatibility with a wide range of sources such as Blu-ray players, gaming consoles, and streaming devices. Additionally, it features built-in Bluetooth technology, allowing users to stream their favorite songs directly from smartphones or tablets without the hassle of wires.

The receiver's user interface is designed with convenience in mind. The LCD display makes it easy to navigate through settings and inputs, while the remote control provides users with extensive control options from the comfort of their couch. For those who appreciate the aesthetics of home audio equipment, the Sherwood R-865 also sports a timeless design with clean lines and a classic finish that complements any home décor.

Moreover, the R-865 offers a robust equalizer feature, enabling users to fine-tune audio outputs to match their unique listening preferences. The receiver also includes various safety features such as short-circuit protection and thermal overload safeguards, ensuring reliable operation over long periods.

In summary, the Sherwood R-865 audio receiver packs a punch with its state-of-the-art audio technologies, versatile connectivity options, and user-friendly design. Whether you’re throwing a movie night or hosting a listening party, this receiver stands ready to deliver an unparalleled audio experience that everyone can enjoy.