Sherwood R-865 manual Recording with Tape Monitor, Dubbing from video components onto

Page 42

ENGLISH

RECORDING

•The analog signals from the 8 CH DIRECT inputs as well as the digital signals from DIGITAL inputs can be heard but cannot be recorded.

•The volume, channel level, tone(bass, treble) settings, etc. have no effect on the recording signals.

Recording with TAPE MONITOR

2

Start recoding on the component

connected to TAPE MONITOR.

Select the desired input as a recording source

1 except TAPE MONITOR.

 

 

 

3

Start play on the desired input.

or

 

 

 

• For tape monitor function, refer to “TAPE MONITOR function” on page 28.

Dubbing from video components onto

2

Start recording on the component

connected to VIDEO 1.

VIDEO 1

Select the desired input of VIDEO 2~ 4 as

 

 

1 a recording source except VIDEO 1.

3

Start play on the desired input.

 

 

 

• The audio and video signals from the desired input will be

 

dubbed onto the VIDEO 1and you can enjoy them on the

 

TV set and from the speakers.

or

• When the VIDEO 2(/ROOM 2) IN/OUT jacks are

connected to video recording component such as video

 

 

deck, etc., in the same manner, recording with VIDEO 2

 

can be performed.

 

(If this is the case, be sure to deactivate the ROOM 2

 

function and to set the VIDEO 2 OUT to On. For details,

 

refer to “When selecting the VIDEO 2 OUT” on page 60.)

Dubbing the sound and image signals

2

Select VIDEO 2 as a image recording

separately onto VIDEO 1

source with performing “When selecting

Example) When dubbing the VIDEO 2 image signal and

the CURRENT VIDEO” procedure on

 

page 59.

the CD sound signal separately onto VIDEO 1.

 

 

Select CD as an sound recording source.

 

 

1

 

Image source

 

 

Sound source

or

 

 

Image source

Sound source

42

Page 41 Page 43
Image 42
Page 41 Page 43
Contents 865 Introduction Read this Before Operating Your UnitSafety Instruction Contents Connecting Antennas System ConnectionsConnecting Audio Components Component video input default settings Component in 1 Video 1, Component in 2 VideoDigital input default settings VideoConnecting System Control Surround speakers a and B Surround back speakersSpeaker placement Front left and right speakers and center speakerRoom 2 connections Main room Another roomRoomConnecting Microphone Remote Sensor Front Panel ControlsDolby PL II Music Parameter Fluorescent DisplayFluorescent Display Universal Remote Controls LCD ScreenFunction Table of the Numbered Buttons Device to be ControlledRemote Control Operation Range Loading BatteriesUsing Functions of Remote Control Entering a setup codeLearn Delete Macro Code Punch Searching a setup code Programing the commands from other Remote controls Learning modeProgrammed under a device mode Erasing the programmed commandErasing all the commands From one buttonTo erase a macro program Programming a macro functionOperating a macro function To change a macro programCD Delete DVD VCR AUX Programing a punch-through functionAudio Delete TV TV Delete SAT Cable VCROperating a punch-through function Erasing the programmed puch-through functionVOL Delete Play CH English Room 2 Remote Controls Volume UP/DOWN ButtonsBefore operation OperationsListening to a Program Source Tuner CD AUXWhen CD, AUX or Video 1~ Video 4 is selected Adjusting the tone bass and trebleDigital Analog Muting the sound Listening with the headphones Surround Sound Surround modesTheater Front L/R Center Enjoying Surround Sound PL II Music2CH downmix mode To listen in a Dolby Pro Logic IIx modeTo listen in a Dolby Virtual Speaker mode Selecting the surround back channel mode as connected To listen in a Dolby Headphone modeAdjusting each channel level with test tone Adjusting the current channel levelsAdjust the level of the selected channel as Desired Auto tuning Manual tuningAuto presetting Manual presetting Tuning to preset stationsScanning preset stations in sequence Listening to FM stereo broadcastsRecording with Tape Monitor Dubbing the sound and image signalsRecording Dubbing from video components ontoDigital Audio Recording with MD Recorder Other Functions Compressing the dynamic rangeDolby Digital sources only Entering a label Correcting or clearing a labelRoom 2 Source Playback Using the OSD OSD Menu SettingsCurrent Status Display When selecting the Power AMP Assign Setting the Power AMP Assign Setting the Speaker SetupWhen selecting the Speaker Configuration English When selecting the Speaker Distance DownWhen selecting the Virtual Speaker Setup When selecting the Subwoofer When selecting the Subwoofer Mode When selecting the CrossoverWhen selecting the Auto Speaker Setup PreparationsTo confirm the results, press the Cursor Left /RIGHT Setting the System Setup When selecting the Digital Input SetupWhen selecting the Tone Control When Cinema EQ mode is selectedWhen Tone Defeat mode is selected When selecting the OSD Auto Display When selecting the Current VideoWhen selecting the Component Video Setup When selecting the Video 2 OUT When selecting the DC Trigger Setup When the DC Trigger mode is set to OnWhen selecting the A/V Sync Setting the Surround Setup When Decoding Mode is selectedWhen the Surround Mode is selected When the Dolby surround mode is selectedWhen the Dynamic Range is selected When selecting the Panorama mode When selecting the Center Width controlWhen selecting the Dimension control Setting the CH Level Setup When selecting the Preset 1 orWhen selecting the Preset 1 Trim or Preset 2 Trim When selecting the Channel Level Trim When selecting the LFE Level Trim Setting the ROOM2 Feed Setup When selecting the Volume ModeWhen selecting the Room 2 Feed mode When the Room 2 Feed mode is set to OnTroubleshooting Guide Problem Possible Cause RemedySpecifications Amplifier SectionDigital Audio Section Setup Code Table TMK RCASSS CCESTS KLHMEI ABC NSCSAT HTSNSM DKKMCS QED865

R-865 specifications

The Sherwood R-865 is a remarkable audio receiver that encapsulates the essence of home audio entertainment. Belonging to the renowned Sherwood brand, this model is a perfect blend of vintage aesthetics and modern engineering, making it a prized addition for audiophiles and casual listeners alike.

At the heart of the Sherwood R-865 lies its powerful amplification section, designed to deliver exceptional sound quality and maintaining audio fidelity across various frequencies. The receiver supports 5.1 channel surround sound, making it an ideal choice for those who enjoy immersive audio experiences in their home theater setups. With a power output of up to 100 watts per channel, the R-865 can easily drive a variety of speaker systems, resulting in detailed sound reproduction that brings movies, music, and games to life.

One of the standout features of the R-865 is its advanced digital signal processing capabilities. This technology not only enhances audio clarity but also ensures that users can enjoy an optimized sound experience tailored to their room's acoustics. The inclusion of multiple sound modes further allows listeners to choose settings that suit different genres of music or types of content, whether it be movies, music, or sports.

Connectivity is another strong point for the Sherwood R-865. It offers a variety of inputs, including HDMI, optical, and coaxial ports, ensuring compatibility with a wide range of sources such as Blu-ray players, gaming consoles, and streaming devices. Additionally, it features built-in Bluetooth technology, allowing users to stream their favorite songs directly from smartphones or tablets without the hassle of wires.

The receiver's user interface is designed with convenience in mind. The LCD display makes it easy to navigate through settings and inputs, while the remote control provides users with extensive control options from the comfort of their couch. For those who appreciate the aesthetics of home audio equipment, the Sherwood R-865 also sports a timeless design with clean lines and a classic finish that complements any home décor.

Moreover, the R-865 offers a robust equalizer feature, enabling users to fine-tune audio outputs to match their unique listening preferences. The receiver also includes various safety features such as short-circuit protection and thermal overload safeguards, ensuring reliable operation over long periods.

In summary, the Sherwood R-865 audio receiver packs a punch with its state-of-the-art audio technologies, versatile connectivity options, and user-friendly design. Whether you’re throwing a movie night or hosting a listening party, this receiver stands ready to deliver an unparalleled audio experience that everyone can enjoy.
Top Page Image Contents