Sherwood R-865 manual Room 2 Source Playback

Page 46

ENGLISH

ROOM 2 SOURCE PLAYBACK

•This function allows enjoying one source in the main room and playing another in a different room at the same time.

•The analog signals from the 8 CH DIRECT inputs and TAPE MONITOR INs as well as the digital signals from the coaxial or optical digital input cannot be output from the (VIDEO 2/) ROOM 2 OUTs, meaning no playback in a different room.

•When you connect the multi-room system kit to the IR IN jack of this unit, you can control this unit with not only the universal remote control unit but also the ROOM2 remote control unit in a different room, too.

(For details, refer to “CONNECTING MULTI-ROOM SYSTEM KIT” on page 12 and “ROOM 2 Romte controls” on page 27.)

CAUTION : Even when the ROOM 2 function is deactivated, if the VIDEO 2 OUT is set to On, the signals of the selected source as a main room source will be output from the VIDEO 2/ROOM 2 OUTs.(For details, refer to “When selecting the VIDEO 2 OUT” on page 60.)

When using the ROOM 2 remote control unit

 

When using the universal remote control unit or the

• You can use the ROOM 2 function with the ROOM 2

 

buttons on the front panel.

remote control unit more conveniently.

 

 

1

Press the ROOM 2 button.

1

Press the ROOM 2 button.

ROOM2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

or

• “R2” lights up and “(R2)~” is displayed for several

 

 

 

seconds and the ROOM 2 function is activated.

 

 

 

• To cancel the ROOM 2 function, press it again.

 

 

 

Then “R2” goes off.

 

 

• “R2” lights up and “(R2)~” is displayed for several seconds

• In the operating mode, when one of the ROOM 2

 

 

and the ROOM 2 function is activated.

INPUT SELECTOR buttons on this remote control

 

• To cancel the ROOM 2 function, press it again.

is pressed, the ROOM 2 function is automatically

 

 

Then “R2” goes off.

activated without pressing the ROOM 2 button and

 

• You can cancel the ROOM 2 function with using these

the desired input is selected.

 

 

 

 

buttons even in the standby mode.

 

 

 

 

2

Select the desired

 

 

2

Select the desired input as a ROOM 2 source

input as a ROOM 2

CD

TUNER

while displaying “(R2)~”.

 

 

source.

AUX

AUDIO

 

 

VIDEO 1 VIDEO 2

VIDEO 3

 

 

 

VIDEO 4

 

 

 

• The selected ROOM 2 source is

 

VIDEO

 

 

displayed for several seconds as

 

 

 

or

follows: (R2) TUNER, (R2) CD,

 

 

 

(R2) AUX, (R2) VIDEO 1~4.

 

 

 

 

• Only these sources can be played in another room.

 

 

 

• When an audio program source is selected, as a ROOM 2

 

 

 

source, the image of the video program source selected

 

 

 

previously can be played separately, too. (For details, refer

 

 

to “ SETTING THE ROOM2 FEED SETUP” on page 69.)

 

 

• The MUTE and VOLUME UP/DOWN( /

) buttons on

• The selected ROOM 2 source is displayed for several

this remote control can be available only when the ROOM 2

seconds.

 

function is operating.

 

 

• Only while displaying “(R2)~”, the volume level for the

Note:

 

 

 

ROOM 2 source can be adjusted.

• When the muting effect for the ROOM 2 source is operating,

• When “(R2)~” is not displayed, press the ROOM 2 button

“MUTE” is flickering.

 

 

briefly twice.

3

Start play on the component related to the

 

3

Start play on the component related to the

ROOM 2 source.

 

 

ROOM 2 source.

Notes:

•When the pure audio function is activated for the main room source, the video signals of the ROOM 2 source cannot be output, too.

•Even when this receiver enters the standby mode, in such a case that “R2” lights up still and the STANDBY button lights up in blue as it does in the operating mode, meaning only the ROOM 2 circuitry operates, the ROOM 2 source can be played independently.

•When the ROOM 2 function is operating in the standby mode, only the ROOM 2 remote control unit is available.

•When you do not use the ROOM 2 function, cancel the ROOM 2 function to save electricity.

•For ROOM 2 volume adjustment, refer to “SETTING THE ROOM 2 FEED SETUP” on page 69.

46

Page 45 Page 47
Image 46
Page 45 Page 47
Contents 865 Introduction Read this Before Operating Your UnitSafety Instruction Contents Connecting Antennas System ConnectionsConnecting Audio Components Component video input default settings Component in 1 Video 1, Component in 2 VideoDigital input default settings VideoConnecting System Control Surround speakers a and B Surround back speakersSpeaker placement Front left and right speakers and center speakerRoom 2 connections Main room Another roomRoomConnecting Microphone Remote Sensor Front Panel ControlsDolby PL II Music Parameter Fluorescent DisplayFluorescent Display Universal Remote Controls LCD ScreenFunction Table of the Numbered Buttons Device to be ControlledRemote Control Operation Range Loading BatteriesEntering a setup code Using Functions of Remote ControlLearn Delete Macro Code Punch Searching a setup code Programing the commands from other Remote controls Learning modeProgrammed under a device mode Erasing the programmed commandErasing all the commands From one buttonTo erase a macro program Programming a macro functionOperating a macro function To change a macro programCD Delete DVD VCR AUX Programing a punch-through functionAudio Delete TV TV Delete SAT Cable VCRErasing the programmed puch-through function Operating a punch-through functionVOL Delete Play CH English Room 2 Remote Controls Volume UP/DOWN ButtonsBefore operation OperationsListening to a Program Source Tuner CD AUXAdjusting the tone bass and treble When CD, AUX or Video 1~ Video 4 is selectedDigital Analog Muting the sound Listening with the headphones Surround Sound Surround modesTheater Front L/R Center Enjoying Surround Sound PL II MusicTo listen in a Dolby Pro Logic IIx mode 2CH downmix modeTo listen in a Dolby Virtual Speaker mode Selecting the surround back channel mode as connected To listen in a Dolby Headphone modeAdjusting each channel level with test tone Adjusting the current channel levelsAdjust the level of the selected channel as Desired Manual tuning Auto tuningAuto presetting Manual presetting Tuning to preset stationsScanning preset stations in sequence Listening to FM stereo broadcastsRecording with Tape Monitor Dubbing the sound and image signalsRecording Dubbing from video components ontoDigital Audio Recording with MD Recorder Compressing the dynamic range Other FunctionsDolby Digital sources only Entering a label Correcting or clearing a labelRoom 2 Source Playback OSD Menu Settings Using the OSDCurrent Status Display When selecting the Power AMP Assign Setting the Speaker Setup Setting the Power AMP AssignWhen selecting the Speaker Configuration English When selecting the Speaker Distance DownWhen selecting the Virtual Speaker Setup When selecting the Subwoofer When selecting the Subwoofer Mode When selecting the CrossoverWhen selecting the Auto Speaker Setup PreparationsTo confirm the results, press the Cursor Left /RIGHT Setting the System Setup When selecting the Digital Input SetupWhen Cinema EQ mode is selected When selecting the Tone ControlWhen Tone Defeat mode is selected When selecting the Current Video When selecting the OSD Auto DisplayWhen selecting the Component Video Setup When selecting the Video 2 OUT When selecting the DC Trigger Setup When the DC Trigger mode is set to OnWhen selecting the A/V Sync Setting the Surround Setup When Decoding Mode is selectedWhen the Dolby surround mode is selected When the Surround Mode is selectedWhen the Dynamic Range is selected When selecting the Center Width control When selecting the Panorama modeWhen selecting the Dimension control When selecting the Preset 1 or Setting the CH Level SetupWhen selecting the Preset 1 Trim or Preset 2 Trim When selecting the Channel Level Trim When selecting the LFE Level Trim Setting the ROOM2 Feed Setup When selecting the Volume ModeWhen selecting the Room 2 Feed mode When the Room 2 Feed mode is set to OnTroubleshooting Guide Problem Possible Cause RemedyAmplifier Section SpecificationsDigital Audio Section Setup Code Table TMK RCASSS CCEKLH STSMEI ABC NSCSAT HTSNSM DKKMCS QED865

R-865 specifications

The Sherwood R-865 is a remarkable audio receiver that encapsulates the essence of home audio entertainment. Belonging to the renowned Sherwood brand, this model is a perfect blend of vintage aesthetics and modern engineering, making it a prized addition for audiophiles and casual listeners alike.

At the heart of the Sherwood R-865 lies its powerful amplification section, designed to deliver exceptional sound quality and maintaining audio fidelity across various frequencies. The receiver supports 5.1 channel surround sound, making it an ideal choice for those who enjoy immersive audio experiences in their home theater setups. With a power output of up to 100 watts per channel, the R-865 can easily drive a variety of speaker systems, resulting in detailed sound reproduction that brings movies, music, and games to life.

One of the standout features of the R-865 is its advanced digital signal processing capabilities. This technology not only enhances audio clarity but also ensures that users can enjoy an optimized sound experience tailored to their room's acoustics. The inclusion of multiple sound modes further allows listeners to choose settings that suit different genres of music or types of content, whether it be movies, music, or sports.

Connectivity is another strong point for the Sherwood R-865. It offers a variety of inputs, including HDMI, optical, and coaxial ports, ensuring compatibility with a wide range of sources such as Blu-ray players, gaming consoles, and streaming devices. Additionally, it features built-in Bluetooth technology, allowing users to stream their favorite songs directly from smartphones or tablets without the hassle of wires.

The receiver's user interface is designed with convenience in mind. The LCD display makes it easy to navigate through settings and inputs, while the remote control provides users with extensive control options from the comfort of their couch. For those who appreciate the aesthetics of home audio equipment, the Sherwood R-865 also sports a timeless design with clean lines and a classic finish that complements any home décor.

Moreover, the R-865 offers a robust equalizer feature, enabling users to fine-tune audio outputs to match their unique listening preferences. The receiver also includes various safety features such as short-circuit protection and thermal overload safeguards, ensuring reliable operation over long periods.

In summary, the Sherwood R-865 audio receiver packs a punch with its state-of-the-art audio technologies, versatile connectivity options, and user-friendly design. Whether you’re throwing a movie night or hosting a listening party, this receiver stands ready to deliver an unparalleled audio experience that everyone can enjoy.
Top Page Image Contents