Sherwood R-865 manual Auto tuning, Manual tuning, Auto presetting

LISTENING TO RADIO BROADCASTS

Auto tuning

Select the tuner.

1

or

Select the desired band.

2

BANDFREQUENCY

•Each time this button is pressed, the band is changed to FM or AM.

•When pressing the BAND button without selecting the TUNER, the tuner will be selected automatically.

ENGLISH

Press the TUNING UP(+) or DOWN(-) button for more than 0.5 second.

3

+

or

•Then “ AUTO” appears on the display. The tuner will now search until a station of sufficient strength has been found. The display shows the tuned frequency and “TUNED”.

•If the station found is not the desired one, simply repeat this operation.

•Weak stations are skipped during auto tuning.

Manual tuning	+
• Manual tuning is useful when you already know the
frequency of the desired transmitter.	or

•Perform the steps ~ in “Auto tuning” procedure and

press the TUNING UP(+) or DOWN(-) button repeatedly until the right frequency has been reached.

Auto presetting

•Auto presetting function automatically searches for FM stations only and store them in the memory.

•While listening to radio broadcasts, press and hold down the (ENTER/)MEMORY button for more than 3 seconds.

• Then “AUTO” lights up and this unit starts auto

	presetting.
	• Up to 30 FM stations can be stored.
	Notes:
	• FM stations of weak strength cannot be memorized.
or	• To memorize AM stations or weak stations, perform
	“Manual presetting” procedure with using “Manual
	tuning” operation.
	• When performing auto presetting with the remote
	control, first be sure to turn off the OSD menu display.

39