Sherwood R-865 manual Using Functions of Remote Control, Entering a setup code

Page 19

USING FUNCTIONS OF REMOTE CONTROL

•This remote control can control up to 8 different components.

•Before operating audio and video components other than this receiver with using this remote control, the setup code for each component should be entered.

•For system remote control operation, “000” was stored previously in the memory of the device button “CD” for Sherwood CD player, “DVD” for Sherwood DVD player, “AUX” for Sherwood tape deck and “TV” for Sherwood TV respectively as its factory setup code. So, you don’t need to enter its code for each Sherwood component except in such a case that its code does not work.

 

Entering a setup code

 

 

 

 

 

 

 

 

• Setup code entry is the easiest way to program this

2

Find the setup codes according to the type

 

remote control for operating audio and video

and the brand name of your component,

 

components.

referring to “Setup Code Table” on page 73.

1

Turn on the component you want to

 

 

 

 

 

 

 

operate

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

Press and hold down both the ENTER

4

While “LEARN” is displayed, press the

button and the desired one of the DEVICE

CURSOR UP( )/DOWN( ) buttons to

buttons for more than 2 seconds.

select the setup code mode (“CODE”), then

 

 

 

 

 

 

 

 

press the ENTER.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Then “LEARN” is displayed on the LCD screen for

• Each time the CURSOR UP( )/DOWN( ) buttons

several seconds.

are pressed, the mode changes as follows :

 

 

LEARN

DELETE MACRO

 

 

 

 

 

 

Notes:

 

CODE

PUNCH

 

 

 

 

 

 

 

 

 

• The AUDIO button is unavailable for the audio

• Then “PRESET” and 3 digit number are displayed.

components other than this receiver.

• If “PRESET”, etc. go off, start again from the above

• During setting operation, to exit from the setting

step .

 

 

 

 

 

mode, press any of the DEVICE buttons.

 

 

 

 

 

5

While “PRESET”, etc. are displayed, enter a 3 digit code and press the ENTER button, aiming

the remote control sensor on the component.

• Then “OK” is displayed on the LCD screen.

• To be sure that the setup code is correct, press the POWER ON (or STANDBY) button.

• If the setup code is correct, your component will be turned off.

• When your component is not turned off, repeat the

above steps to , trying entering each code for your component until you find one that works.

• If “NG” is displayed, retry entering the correct setup code while “PRESET” and 3 digit number are displayed.

ENGLISH

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents 865 Read this Before Operating Your Unit IntroductionSafety Instruction Contents System Connections Connecting AntennasConnecting Audio Components Component in 1 Video 1, Component in 2 Video Component video input default settingsVideo Digital input default settingsConnecting System Control Surround back speakers Surround speakers a and BFront left and right speakers and center speaker Speaker placementMain room Another roomRoom Room 2 connectionsConnecting Microphone Fluorescent Display Front Panel ControlsDolby PL II Music Parameter Remote SensorFluorescent Display LCD Screen Universal Remote ControlsDevice to be Controlled Function Table of the Numbered ButtonsLoading Batteries Remote Control Operation RangeEntering a setup code Using Functions of Remote ControlLearn Delete Macro Code Punch Searching a setup code Remote controls Learning mode Programing the commands from otherFrom one button Erasing the programmed commandErasing all the commands Programmed under a device modeTo change a macro program Programming a macro functionOperating a macro function To erase a macro programTV Delete SAT Cable VCR Programing a punch-through functionAudio Delete TV CD Delete DVD VCR AUXErasing the programmed puch-through function Operating a punch-through functionVOL Delete Play CH English Volume UP/DOWN Buttons Room 2 Remote ControlsTuner CD AUX OperationsListening to a Program Source Before operationAdjusting the tone bass and treble When CD, AUX or Video 1~ Video 4 is selectedDigital Analog Muting the sound Listening with the headphones Surround modes Surround SoundTheater Front L/R Center PL II Music Enjoying Surround SoundTo listen in a Dolby Pro Logic IIx mode 2CH downmix modeTo listen in a Dolby Virtual Speaker mode To listen in a Dolby Headphone mode Selecting the surround back channel mode as connectedAdjusting the current channel levels Adjusting each channel level with test toneAdjust the level of the selected channel as Desired Manual tuning Auto tuningAuto presetting Tuning to preset stations Manual presettingListening to FM stereo broadcasts Scanning preset stations in sequenceDubbing from video components onto Dubbing the sound and image signalsRecording Recording with Tape MonitorDigital Audio Recording with MD Recorder Compressing the dynamic range Other FunctionsDolby Digital sources only Correcting or clearing a label Entering a labelRoom 2 Source Playback OSD Menu Settings Using the OSDCurrent Status Display When selecting the Power AMP Assign Setting the Speaker Setup Setting the Power AMP AssignWhen selecting the Speaker Configuration English Down When selecting the Speaker DistanceWhen selecting the Virtual Speaker Setup When selecting the Subwoofer When selecting the Crossover When selecting the Subwoofer ModePreparations When selecting the Auto Speaker SetupTo confirm the results, press the Cursor Left /RIGHT When selecting the Digital Input Setup Setting the System SetupWhen Cinema EQ mode is selected When selecting the Tone ControlWhen Tone Defeat mode is selected When selecting the Current Video When selecting the OSD Auto DisplayWhen selecting the Component Video Setup When selecting the Video 2 OUT When the DC Trigger mode is set to On When selecting the DC Trigger SetupWhen selecting the A/V Sync When Decoding Mode is selected Setting the Surround SetupWhen the Dolby surround mode is selected When the Surround Mode is selectedWhen the Dynamic Range is selected When selecting the Center Width control When selecting the Panorama modeWhen selecting the Dimension control When selecting the Preset 1 or Setting the CH Level SetupWhen selecting the Preset 1 Trim or Preset 2 Trim When selecting the Channel Level Trim When selecting the LFE Level Trim When selecting the Volume Mode Setting the ROOM2 Feed SetupWhen the Room 2 Feed mode is set to On When selecting the Room 2 Feed modeProblem Possible Cause Remedy Troubleshooting GuideAmplifier Section SpecificationsDigital Audio Section Setup Code Table CCE RCASSS TMKKLH STSMEI NSC ABCHTS SATQED DKKMCS NSM865

R-865 specifications

The Sherwood R-865 is a remarkable audio receiver that encapsulates the essence of home audio entertainment. Belonging to the renowned Sherwood brand, this model is a perfect blend of vintage aesthetics and modern engineering, making it a prized addition for audiophiles and casual listeners alike.

At the heart of the Sherwood R-865 lies its powerful amplification section, designed to deliver exceptional sound quality and maintaining audio fidelity across various frequencies. The receiver supports 5.1 channel surround sound, making it an ideal choice for those who enjoy immersive audio experiences in their home theater setups. With a power output of up to 100 watts per channel, the R-865 can easily drive a variety of speaker systems, resulting in detailed sound reproduction that brings movies, music, and games to life.

One of the standout features of the R-865 is its advanced digital signal processing capabilities. This technology not only enhances audio clarity but also ensures that users can enjoy an optimized sound experience tailored to their room's acoustics. The inclusion of multiple sound modes further allows listeners to choose settings that suit different genres of music or types of content, whether it be movies, music, or sports.

Connectivity is another strong point for the Sherwood R-865. It offers a variety of inputs, including HDMI, optical, and coaxial ports, ensuring compatibility with a wide range of sources such as Blu-ray players, gaming consoles, and streaming devices. Additionally, it features built-in Bluetooth technology, allowing users to stream their favorite songs directly from smartphones or tablets without the hassle of wires.

The receiver's user interface is designed with convenience in mind. The LCD display makes it easy to navigate through settings and inputs, while the remote control provides users with extensive control options from the comfort of their couch. For those who appreciate the aesthetics of home audio equipment, the Sherwood R-865 also sports a timeless design with clean lines and a classic finish that complements any home décor.

Moreover, the R-865 offers a robust equalizer feature, enabling users to fine-tune audio outputs to match their unique listening preferences. The receiver also includes various safety features such as short-circuit protection and thermal overload safeguards, ensuring reliable operation over long periods.

In summary, the Sherwood R-865 audio receiver packs a punch with its state-of-the-art audio technologies, versatile connectivity options, and user-friendly design. Whether you’re throwing a movie night or hosting a listening party, this receiver stands ready to deliver an unparalleled audio experience that everyone can enjoy.
Top Page Image Contents