Yeoman YM-CL8HB manual Adjusting Door Catch & Hinges, MAINTENANCE and SERVICING

MAINTENANCE and SERVICING

7.ADJUSTING DOOR CATCH & HINGES

7.1To maintain the safe use of your appliance, you may need to adjust the door hinges to ensure the door closes safely and correctly.

7.2To adjust the door catch:

—Open the door to gain access to the catch.

—Use a 13mm A/F spanner to loosen the half lock nuts either side of the appliance body. This will allow the dome catch to rotate in and out (see diagram below).

Stove body Washer

Half lock nuts

Dome catch

PR8740

—Once the desired setting has been achieved ensure the lock nuts are tightened against the appliance body.

7.3To adjust the door hinge plate assembly:

—Open door and lift free of hinge plate.

—Lay the door face down on a soft, flat surface, to protect the paintwork and glass.

—Use an M6 hexagon key to loosen the 4 x M6 screws.

M6 screws

x 4

PR8741

The hinge plate assembly is slotted so it can be moved up, down and sideways by approximately 3mm to adjust the position of the door in relation to the appliance.

—Once the desired position has been achieved ensure the screws are firmly tightened against the hinge plate assembly to maintain the position.

Organisations authorised to certify competence in the installation of domestic solid fuel appliances (Competent Persons Scheme):

APHC - Association of Plumbing and Heating

Contractors (Certification) Ltd.

www.aphc.co.uk

BESCA - Building Engineering Services Competence Accreditation Ltd.

www.besca.org.uk

HETAS - Heating Equipment Testing and Approval Scheme Ltd.

www.hetas.co.uk

NAPIT - National Association of Professional Inspectors and Testers Ltd.

www.napit.org.uk

NICEIC - NICEIC Group Ltd.

www.niceic.org.uk

HETAS Approved Chimney Sweeps:

Nacs - The National Association of Chimney Sweeps www.chimneyworks.co.uk

APICS - The Association of Master Chimney Sweeps Ltd. www.apics.org

The Guild of Master Chimney Sweeps guildofmasterchimneysweeps.co.uk

35