Technical Specification, Yeoman, Packing List

TECHNICAL SPECIFICATION

YEOMAN

Model

Yeoman YM-CL8HB

Nominal Heat Output	Wood	kW	8
Nominal Heat Output	Solid Fuel	kW	8.6
	Solid Fuel	kW	8.6

Flue Draft at Nominal Heat Output	All Fuels	mm Wg	1.25

		inch Wg	0.05
		inch Wg	0.05
Flue Outlet Size (Top or Rear Option)		mm	150
Flue Outlet Size (Top or Rear Option)		inch	6
		inch	6


Minimum Hearth Type Required	Constructional = CH		CH
Weight		kg	140
	Wood	Seasoned wood (less than 20%
	Wood	moisture content)
		moisture content)
Recommended Fuels		Briquette smokeless fuel suitable
	Solid Fuels	for closed appliances.
	Solid Fuels	(Ancit - Phurnacite - Taybrite -
		(Ancit - Phurnacite - Taybrite -
		Homefire ovals)

1.STANDARD FEATURES

•Primary Air (under grate air for full multi-fuel use).

•Airwash (for wood burning / clean glass).

•Riddling grate system for clean de-ashing.

•Top or rear flue exit option.

2.PACKING LIST

•User & Installer Instructions

•Guarantee card

•Pair leather gloves

•Ashpan

•Ashpan tool

•Riddling tool

Boiler Output Chart

PR8233

Page 15

Image 15

Yeoman YM-CL8HB manual Technical Specification, Yeoman, Standard Features, Packing List, Boiler Output Chart

Contents

YM-CL8HB Yeoman CL Contents Essential Information Must be completed Appliance Commissioning ChecklistInstallation Engineer Retailer appliance was purchased from Thermostat User InstructionsGeneral Points Serial Number Heating System controls Do not place tool on hot surfaces e.g. top of stoveUse a protected gloved hand to operate Seasonal USE Using the Appliance for the First TimeCondensation Normal Running Solid fuel Lighting the Appliance Running The appliance Burning woodDo not load above the log guard or base of baffle Refuelling Thermostat OperationBurning tips ASH Removal Over-firing can cause permanent damage to the appliance Wood burning trayExtended burning OVER-FIRING Chimney Sweeping General CleaningCleaning Glass Chimney fire Care of stove Seasonal use Troubleshooting tips Open up the airwash to make All or some of the radiators do not get hot Yeoman TECHNICAL SPECIFICATIONStandard Features Boiler Output Chart 563 572 363 105 478 153/6 449 441 225 430 224 317 Yeoman DimensionsAll dimensions are in mm 25.4mm = Cast Top Plate Incl. feet @ 6mm on underside Flue Plate Site RequirementsFlue or Chimney Max. Draught = 2.0mm Wg Min. Draught = 1.0mm Wg U.K Flue Outlet Positions Hearth Dimensions Walls Next to a Hearth Requirement for the walls80mm Flue / Chimney Size PRE-INSTALLATION ChecksFlue Without Liner System 150 Changes to Document J, England & Wales, from 01/10/2010 VentilationModel Mm² 4400 Additional Ventilation Legal requirements Installation InstructionsInstalling the Appliance Top flue pipe installation To chimney connection as detailed in building regulations Secure with self tapping screw Seal the connecting jointsRear flue pipe installation Do not use a 90˚elbow to make this connection Do not modify the baffle Fitting and Removal of the BaffleRemoval of Riddling Mechanism Ensure baffle sits On front supports Baffle In Place Replace in reverse order Remove Rear Bar see DiagramLift bars to remove Unscrew the boss Top Flue Rear Flue Hearth FixingCast TOP Fixing holes Hearth mounts Central Heating System Conventional Pipe work systems Pipe work DiagramsPump Electrical Supply Feed Expansion Cistern Controls General Link UP Systems Give the copy of the Instructions to the customer CommissioningCommissioning Instructions for Use Annual Service Do not use appliance without the log guard in position Removal of the LOG GuardFitting and Removal of Baffle Fitting a NEW Door Glass Fitting a new door seal Do not over tighten the clamp as this could break the glassMid door Rope seal E Joint Adjusting Door Catch & Hinges To adjust the door hinge plate assemblyHetas Approved Chimney Sweeps Spare Parts List Cast Door Service Records