Yeoman YM-CL8HB Removal Of The Log Guard, Fitting And Removal Of Baffle, Fitting A New Door Glass

MAINTENANCE and SERVICING

2.REMOVAL OF THE LOG GUARD

2.1To remove the Log guard:

—Lift Log Guard clear of the supporting brackets.

—Rotate to clear the sides of the door opening.

Do not use appliance without the log guard in position.

3.FITTING AND REMOVAL OF BAFFLE

4.1See Installation Instructions, Section 3.

4.2It is important to remove and clean the Baffle system to ensure the flue ways are clear of soot and debris and to ensure the safe and efficient operation of the stove. The frequency of cleaning depends on the stove operating conditions.

4.3The baffle system is designed to give safe and efficient operation of the stove. Replace any damaged baffle immediately.

4.4Do not modify the baffle system.

5.FITTING A NEW DOOR GLASS

5.1To maintain safe use of the appliance damaged door glass must be replaced immediately. To do this:

—Open door and lift free of hinge blocks.

—Lay door face down on a soft flat surface to protect the paintwork and glass.

—Remove the glass clamp and screws x 8. The old glass can then be lifted clear of the door. Note how the sealing rope is placed around the glass.

Dispose of the old glass safely.

Fixing Screws x 8

Glass rope

seal

B

Glass rope			Door
seal
A			PR8738
	Seal	Length (mm)
	Glass rope seal A	1220
	Glass rope seal B	460
		Black face

Glass rope

seal

B

PR8739

Glass rope seal

A PR8757

33