Yeoman YM-CL8HB manual Hearth Fixing, Cast TOP, Fixing holes Hearth mounts, Top Flue Rear Flue

INSTALLATION INSTRUCTIONS

5.HEARTH FIXING

5.1If the appliance is to be fixed to the hearth then use the hearth mount locking tabs shown in Diagram 12.

—Position the appliance where required on the hearth and mark the location of the two fixing holes in the hearth mounts.

—Drill the required sized holes into the hearth. —Use suitable fasteners to fix in place.

12

Fixing holes in
hearth mounts	PR8755

6. CAST TOP

This appliance can be fitted with an optional cast top plate. The type of plate will depend on whether the appliance is installed with a top* or rear flue exit.

	Top Flue	Rear Flue
Yeoman CL8	YM-CL8CT	YM-CL8CTR

*The cast top must be fitted at the same time as the flue connection (see Installation Instructions, Sections 1 & 6).

6.1The cast top plate has 4 cast feet on the bottom to space it off the top of the appliance by 6mm and allow the door to open freely.

13	Cast feet
	PR8756

6.2Place the cast top plate feet down on top of the appliance.

—Ensure the cast top is flush with the front and sides of the appliance.

—For the top flue version, position the cutout over the flue ring.

14

Line up edges of cast top plate with the appliance

PR8744

26