Frigidaire FPDF4085KF Setting surface controls, Placement of Burner Bases and Caps

Page 10

setting surface controls

Placement of Burner Bases and Caps

Your Cooktop is equipped with three different sizes of burners: Power Burner, Standard Burner and Simmer Burner.

Place the burner base over each gas opening, matching the burner base size with the gas opening size. Place the burner cap on each burner base, again matching the cap size to the burner base size. The cap for each burner has an inner locating ring which locates the burner cap in the center of the burner.

Make sure each burner cap is properly aligned and level.

Turn the burner on to determine if it will light. If the burner does not light, contact a Service Center. Do not service the sealed burner yourself.

BurnerCap

Burner Pan

Burner

BaseGas

Opening

Electrode

Placement of Burner Grates

Place grate over burner pans. Make sure that the groove under grate fits over the raised lip of the burner pan. The rounded corners of the grates should be placed toward the front of the cooktop for the front burners and the rear of the cooktop for the back burners.

Grate

Burner pan

lip

Cooktop

Surface

10

Image 10

Contents Use &Care Product Welcome & CongratulationsRegister Your Product Please Carefully read and save these instructionsDefinitions Important Safety InstructionsFor Your Safety What to do if YOU Smell GASImportant Safety Instructions Important Instructions for Using Your cooktop Important Safety Instructions for Using Your OvenImportant Safety Notice Conversion to Liquefied Petroleum Gas L.P. GasFeatures AT a Glance Your built-in range FeaturesUse Proper Cookware Using a wokSurface cooking CorrectincorrectCanning Tips & Information Placement of Burner Bases and Caps Setting surface controlsPlacement of Burner Grates Flame Size Type of Cooking Setting Proper Surface Burner Flame SizeOperating the Gas Surface Controls ImproperArranging oven racks Oven vent locationAir circulation in the oven Recommended rack positionsSetting Main Oven controls Control pad featuresSetting Continuous Bake or 12 Hour Energy Saving Minimum and Maximum Control Pad SettingsSetting the Clock Feature Minimum TEMP. /TIME Maximum TEMP. /TIMESetting Silent Control Operation Setting Minute TimerSetting Lockout Feature Setting Temperature Display Fahrenheit or CelsiusSetting Convection Bake Setting BakeStart To set a Convection Roast Temperature of 375F Setting Convection RoastSetting Convection Convert Convection Roasting TipsWhen the timed bake finishes Setting Bake TimeSetting Delay Start Press START. TIMED, Bake and 350 will remain in the displayTo set a Broil of 550F CancelBroiling Tips Electric Oven Broiling Table RecommendationsTo set Keep Warm Keep Warm TipsTo set Keep Warm to turn on automatically Setting the Sabbath Feature To adjust the oven temperature lower Adjusting Oven TemperatureTo adjust the oven temperature higher Oven lightAdhere to the following cleaning precautions Self-cleaningWhat to Expect during Cleaning When the Self-Clean Cycle is Completed To Start the delayed Self-Clean CyclePress START. DELAY, Door Locked To Broil Setting auxiliary Oven controlsTo Bake Rack Position From Top FoodCare & Cleaning Cleaning Chart Cleaning various parts of your applianceCare & Cleaning Porcelain enamel oven Cleaning auxiliary ovenFor light to moderate soil Ceramic glass cooktop cleaning & maintenanceCleaning recommendations for the ceramic glass cooktop For heavy, burned on soilTo Clean the Burner Caps To Clean the Contoured Burner PansTo Clean the Grates Aluminum utensilsTo Remove Oven Door Care and cleaning of stainless steelTo Replace Oven Door To remove and replace storage drawer with extendible glide Changing oven lightBe Sure Oven is Cool Oven baking Occurrence Possible CAUSE/SOLUTION Scratches or Self-cleaning cycleSoil not completely removed after self- cleaning cycle Abrasions onPage Exclusions This warranty does not cover the following Disclaimer of Implies Warranties Limitation of Remedies