SETTING OVEN CONTROLS
SETTING THE CLOCK
NOTE
Note: The time of day must first be set in order to operate the oven.
The SET CLOCK pad is used to set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation. When the range is first plugged in, or when the power supply to the range has been interrupted, the timer in the display will flash.
To set the clock
1.Press Set Clock pad once (do not hold pad down).
2.With in 5 seconds, push and hold the Up or Down arrow pad until the correct time of day appears in the display.
3.Press Set Clock pad to accept the new time of day. If Set Clock pad is not pressed, the timer will return automatically to the new time of day after 7 seconds.
NOTE
The clock cannot be changed during any bake, timed bake, delayed time bake, clean cycle, speed clean or delayed clean cycle.
CHANGING BETWEEN 12 OR 24 HOUR TIME OF DAY DISPLAY
1.Press and hold SET CLOCK for 7 seconds.
2.After 7 seconds, “12h” or “24h” will appear in the display and the control beep once.
3.Press Up or Down arrow pad to switch between the 12 and 24 hour time of day display. The display will show either “12h” or “24h”.
4.Wait 5 seconds or press CANCEL pad to return to the time of day display.
5.Reset the correct time as described in To set the Clock above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from 0:00 through 23:59 hours.
SETTING SILENT CONTROL OPERATION
The DELAY START pad control the Silent Control operation feature. When choosing a function, a beep will be heard each time a pad is pushed. If desired, the control can be programmed for silent operation.
To tell if your oven is set for normal or silent operation push and hold Start Time pad for 7 seconds.
NOTE
If “SP” appears, the control will operate with the normal sounds and beeps. If
SETTING TEMPERATURE DISPLAY — FAHRENHEIT OR CELSIUS:
The BROIL pad controls the Fahrenheit or Celsius temperature display modes. The oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit. The oven can be programmed to bake for any temperature from 170°F to 550° (77°C to 288°C).
To change display from Fahrenheit to Celsius or Celsius to Fahrenheit
1.Press and hold BROIL pad for 7 seconds until “F” or “C” appears in the display.
2.Press Up or Down arrow pad to change between Fahrenheit or Celsius display modes.
3.Wait 5 seconds or press CANCEL pad to accept the changes.
SETTING LOCKOUT FEATURE
The control can be programmed to lock the oven door and oven control pads. The oven lockout feature prevents the oven from being accidentally turned ON. It does not disable the clock, Minute Timer or the interior oven lights.
To set control for oven lockout feature
1.Press and hold CANCEL for 3 seconds. The door locked indicator light will flash and the motor driven door lock will begin to close automatically. DO NOT open the oven door while the indicator light is
flashing. Allow about 15 seconds for the oven door to lock. Once the oven door is locked , “Loc” will appear in the display.
2.To cancel the oven lockout feature, press CANCEL pad and hold for 3 seconds. The control will unlock the oven door and resume normal operation.
14