Adjusting Oven Temperature

SETTING OVEN CONTROLS

SETTING QUICK CLEAN OR SELF-CLEAN CYCLE TIME LENGTH

The Quick Clean and Self Clean pads control the Self- Cleaning feature. If you are planning to use the oven directly after a self-clean cycle remember to allow time for the oven to cool down and the oven door to unlock. This normally takes about one hour. So a 3 hour self- clean cycle will actually take about 4 hours to complete.

*It is recommend to use a 2 hour Quick clean cycle for light soils, a 3 hour Self clean cycle for average or heavy soils (to assure satisfactory results).

To set the controls for a Quick Clean or a Self Clean cycle or a Delay Start Quick Clean or a Delay Start Self Clean cycle

1.Be sure the clock is set with the correct time of day and the oven door is closed.

2.Press Start time pad.

3.Press and hold the Up Arrow pad to scroll to the time to start the delayed Self Clean cycle. Release the pad when the desired time is displayed.

4.Press Quick Clean (for a 2 hour cycle) or Self Clean pad (for a 3 hour cycle). “- -”appears in the display.

5.Press the Up Arrow pad once. As soon the controls are set, the motor driven lock will begin to close automatically and the door locked indicator light will ﬂash. DO NOT open the oven door while the light is ﬂashing (It takes about 15 seconds for the oven door to lock).

6.“CLn” will appear in the display during the Self Clean cycle and the Door Locked light will glow until the Self Clean cycle is completed or cancelled and the oven temperature has cooled.

When the Self-Clean Cycle is Completed

1.The time of day or “End” will appear in the display window and “CLEAN” and “DOOR LOCK” light will continue to glow.

2.Once the oven has cooled down for about 1 HOUR, and the “DOOR LOCK” light has gone out, the oven door can be opened.

3.If “End” is in the display and clean indicator light remains ON, press the CANCEL pad. The time of day will appear in the display.

NOTE

When the oven is cool, wipe away any residue or powdered ash with damp cloth or paper towel.

Stopping or Interrupting a Quick Clean or Self Clean Cycle

If it becomes necessary to stop or interrupt a self clean cycle:

1.Press CANCEL.

2.Once the oven has cooled down for about 1 hour and the “DOOR LOCK” light has gone out, the oven door can be opened.

3.Restart the Self Clean cycle once all conditions have been corrected.

Your oven thermostat has been precisely set at the factory. This setting may be differ from your previous oven, however, so your recipe times may not give you the results you expect. If you think the oven is cooking too hot or cool for your recipe times, you can adjust the thermostat so that the oven cooks hotter or cooler then the temperature displayed.

NOTE

The oven temperature adjustments made with this feature will not change the Self-Clean cycle temperature.

To adjust the oven temperature:

1.Press and hold the BAKE pad for 8 seconds. The display now indicates the amount of degrees offset between the original factory temperature setting and the current temperature setting. If the oven controls has the factory calibration, the display will read “0°”.

2.The temperature can now be adjusted up or down 35°F or 19°C, in 1°F or 1°C steps by pushing and holding the Up or Down arrow pad. Adjust until he desired amount of degrees offset appears in the display. When lowering the oven temperature, a minus sign (-) will appear before the number to indicate that the oven will be cooler by the displayed amount of degrees.

3.When you have made the desired adjustment, wait

5 seconds and the display will go back to the time of day.