DeLonghi DEGLSC24SS warranty Temperature Selector, Between LO and HI

Page 10

Knob position	°F	°C

LO	86	30

between LO and HI	from 87 to 247	from 31 to 119

HI	248	120

Moisture selector

DRY

MOIST

Fig. 3.2

TEMPERATURE SELECTOR

The setting can be anywhere between LO and HI position.

WARNING LIGHT

The signal light is located above the con- trol knob and turns “ON’ when the warm- ing is set. It stays on until the knob is turned back to the “OFF” position.

MOISTURE SELECTOR (fig. 3.2)

MOIST position: Vents closed

DRY position: Vents opened

To keep foods moist, slide the moisture selector to the left. This closes the vents and the moisture remains inside the drawer.

In this setting condensation may occur around the inside edge of the drawer.

To keep foods crisp, slide the moisture selector to the right. This opens the vents and allows the moisture to escape. With the vents open, it is normal for moisture to collect on surfaces above the warming drawer.

Fig. 3.3

Fig. 3.5

Fig. 3.4

REVERSIBLE RACK

The rack shall be positioned as per fig- ures 3.3 and 3.4.

10

Image 10

Contents Electric Range ALL Ranges can TIP Dear Customer Electrical Grounding Instructions Replacement PartsElectrical Requirement Important Precautions and Recommendations Never obstruct the slots on the backguard FeaturesVitroceramic Cooking HOB Control PanelCooking Zones How to use the vitroceramic hobVitroceramic HOB Double Cooking Zone Rear left zoneCooking Zones Residual Heat Indicator Cooking Zones Power Indicator Light figHints for Safe USE of the Hobs Using the Warming Drawer for the First Time How to use the warmer drawerGeneral Features To USE the Warming DrawerTemperature Selector Between LO and HIHow to use the self cleaning oven Using the Oven for the First TimeOven Light this is not a cooking function Selecting the Functions figDefrosting Frozen Foods this is not a cooking function Traditional Convection Cooking Self Cleaning Function this is not a cooking function Important NotesTurn the oven selector knob to a cooking function i.e. Bake Selecting F/C on the DisplayTurn the selector knob to the cooking function required HOW to Start the Self Cleaning Cycle Press pushbutton 3 on the programmer to start the cycleDoor with Auto flashing Problems on Starting and During the Self Cleaning CycleSteady door F0.00 with Auto flashingTurn the function selector to OFF oven OFF HOW to Stop the Self Cleaning CycleWhat to do When the Self Cleaning Cycle has Finished Function selector has been turned to any cooking functionDuring cooking or the self cleaning cycle Abnormal Situations AND/OR Operation ProblemsF0.00 appears during the self cleaning cycle Roasting Cooking Advice SterilizationRegeneration Cooking Different Dishes AT the Same TimeStep Broiling Audible Signal How to use the electronic programmerSetting the Time Description of the light symbolsSEMI-AUTOMATIC Cooking TimerSetting During cookingAutomatic Cooking Starting cookingCancelling a SET Programme Examples of Programming Automatic CookingCleaning and maintenance Oven Shelf Installation and Removal Replacing the Oven Light figRemoving the Warmer Drawer fig Fitting the Warmer Drawer figRemoving the Oven Door For Your Safety DO’S and do NOT’SPage Cod ß3