DeLonghi DEGLSC24SS warranty HOW to Stop the Self Cleaning Cycle

Page 18

➀

1a1b

➁

2a2b

3d

HOW TO STOP THE SELF CLEANING CYCLE

1.Turn the function selector to OFF (oven OFF)

-If the oven cavity temperature is higher than 570 °F (300 °C)

1a. The time of day appears steadily on the programmer display.

1b. When the oven cavity temperature drops below 570 °F (300 °C):

-OFF appears on the programmer display again

-the door locked pilot light goes out

-the door unlocks and can be opened

-If the oven cavity temperature is lower than 570 °F

1c. The time appears on the programmer display

1d. After a technical time:

-the door locked pilot light goes out

-the door unlocks and can be opened

IMPORTANT: Wait for the oven to cool down completely before starting a cooking function.

ACCIDENTAL INTERRUPTION OF THE SELF CLEANING CYCLE

2.The function selector has been turned to any cooking function

-If the oven cavity temperature is higher than 570 °F (300 °C)

2a. The time of day appears steadily on the programmer display.

2b. When the oven cavity temperature drops below 570 °F (300 °C):

-OFF appears on the programmer display

-when door locked pilot light goes out (after some minutes) the door unlocks and can be opened

2c. To reset normal conditions turn the function selector to OFF (oven OFF). The time appears on the programmer display.

-If the oven cavity temperature is lower than 570 °F (300 °C)

2d. Pre-set temperature of the selected function appears on the programmer display.

2e. After a technical time:

-the door locked pilot light goes out

-the door unlocks and can be opened

2f. To reset normal conditions turn the function selector to OFF (oven OFF). The time appears on the programmer display.

IMPORTANT: Wait for the oven to cool down completely before starting a cooking function.

➀

➁

➂

18

I

I

I

I

I

I

I

I

I

II

WHAT TO DO WHEN THE SELF CLEANING CYCLE HAS FINISHED

1.P0.00 with AUTO flashing.

Wait for the oven to cool down and the door to unlock.

The self cleaning cycle has finished. P0.00 will remain until the door is unlocked. The door remains locked until the cavity temperature has dropped below 570 °F (300°C).

2.The door locked light goes out (when the temperature has dropped below 570 °F - 300 °C).

AUTO and the letter P flash.

The door is unlocked and can be opened.

3.Turn the function selector knob to OFF (oven OFF). The time appears on the programmer display.

4.Wait for the oven to cool down completely.

5.Remove the pulverised dirt.

Open the oven door and remove the residue of pulverised dirt inside the oven with a damp cloth.

IMPORTANT: Before switching the oven on again in any function wait for the appliance to cool down completely.

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Electric Range ALL Ranges can TIP Dear Customer Replacement Parts Electrical Grounding InstructionsElectrical Requirement Important Precautions and Recommendations Never obstruct the slots on the backguard FeaturesVitroceramic Cooking HOB Control PanelCooking Zones How to use the vitroceramic hobVitroceramic HOB Double Cooking Zone Rear left zoneCooking Zones Power Indicator Light fig Cooking Zones Residual Heat IndicatorHints for Safe USE of the Hobs Using the Warming Drawer for the First Time How to use the warmer drawerGeneral Features To USE the Warming DrawerTemperature Selector Between LO and HIHow to use the self cleaning oven Using the Oven for the First TimeSelecting the Functions fig Oven Light this is not a cooking functionDefrosting Frozen Foods this is not a cooking function Traditional Convection Cooking Self Cleaning Function this is not a cooking function Important NotesSelecting F/C on the Display Turn the oven selector knob to a cooking function i.e. BakeTurn the selector knob to the cooking function required HOW to Start the Self Cleaning Cycle Press pushbutton 3 on the programmer to start the cycleDoor with Auto flashing Problems on Starting and During the Self Cleaning CycleSteady door F0.00 with Auto flashingTurn the function selector to OFF oven OFF HOW to Stop the Self Cleaning CycleWhat to do When the Self Cleaning Cycle has Finished Function selector has been turned to any cooking functionAbnormal Situations AND/OR Operation Problems During cooking or the self cleaning cycleF0.00 appears during the self cleaning cycle Roasting Cooking Advice SterilizationRegeneration Cooking Different Dishes AT the Same TimeStep Broiling Audible Signal How to use the electronic programmerSetting the Time Description of the light symbolsSEMI-AUTOMATIC Cooking TimerSetting During cookingAutomatic Cooking Starting cookingCancelling a SET Programme Examples of Programming Automatic CookingCleaning and maintenance Oven Shelf Installation and Removal Replacing the Oven Light figRemoving the Warmer Drawer fig Fitting the Warmer Drawer figRemoving the Oven Door For Your Safety DO’S and do NOT’SPage Cod ß3
Top Page Image Contents