GE JBP72, JB710, EER3001, JBP81, JBP71 owner manual Using the clock and timer

Page 14

Instructions

Using the clock and timer.

Not all features are on all models.

Operating Instructions Safety

Make sure the clock is set to the correct time of day.

To Set the Clock

The clock must be set to the correct time of day for the automatic oven timing functions to work properly. The time of day cannot be changed during a delayed cooking or a delayed self-cleaning cycle.

Touch the CLOCK pad twice.

Touch the + or pads.

If the + or pads are not touched within one minute after you touch the CLOCK pad, the display reverts to the original

setting. If this happens, touch the CLOCK pad twice and reenter the time of day.

Touch the START/ON pad until the time of day shows in the display. This enters the time and starts the clock.

To check the time of day when the display is showing other information, simply touch the CLOCK pad. The time of day shows until another pad is touched.

To Turn Off the Clock Display

Cleaning

If you have several clocks in your kitchen, you may wish to turn off the time of day clock display on your range.

Touch the CLOCK pad once to turn off the time of day display. Although you will not be able to see it, the

clock maintains the correct time of day.

Touch the CLOCK pad twice to recall the clock display.

Troubleshooting Tips Care and

The timer is a minute timer only.

The CLEAR/OFF pad does not affect the timer.

To Set the Timer

The timer does not control oven operations. The maximum setting on the timer is 9 hours and 59 minutes.

Touch the KITCHEN TIMER ON/OFF pad.

Touch the + or pads until the amount of time you want shows in the display. The maximum time that can be entered in minutes is 59. Times more than 59 minutes should be changed to hours and minutes.

If you make a mistake, touch the KITCHEN TIMER ON/OFF pad and begin again.

Touch the START/ON pad. The time will start counting down, although the display does not change until one minute has passed.

When the timer reaches :00, the control will beep 3 times followed by one beep every 6 seconds until the KITCHEN TIMER ON/OFF pad is touched.

Support

To Reset the Timer

If the display is still showing the time remaining, you may change it by touching the KITCHEN TIMER ON/OFF pad, then touching the + or pads until the time you want appears in the display.

If the remaining time is not in the display (clock, start time or cooking time are in the display), recall the remaining time by touching the KITCHEN TIMER ON/OFF pad and then touching the + or pads to enter the new time you want.

Consumer

To Cancel the Timer

Touch the KITCHEN TIMER ON/OFF pad twice.

14

Image 14
Contents RangesSelf-Cleaning Radiant Write the model and serial numbers here Model # Serial #Important Safety Notice All ranges can tip and injury could resultSafety Precautions Ge.comCleaning Operating Instructions Safety Consumer SupportRadiant Surface Units Oven How to Set Using the surface unitsCleaning Using the Warming ZoneInstructions Cleaning OperatingTemperature Limiter Home Canning TipsSelecting types of cookware SafetyTroubleshooting Tips Consumer Support Using the oven controls Oven Control, Clock and Timer Features and Settings Care and Cleaning Troubleshooting Tips Consumer Support Power OutageUsing the oven HI Broil How to Set the Oven for BroilingBroiling Guide Broil HI/LO pad againUsing the clock and timer How to Set an Immediate Start and Automatic Stop How to Set a Delayed Start and Automatic StopHour Shut-Off Special features of your oven controlSafety Instructions Using the Sabbath Feature Operating Instructions Care and CleaningType of margarine will affect baking performance To Adjust the ThermostatHow to Exit the Sabbath Feature To Use the Warming Drawer Using the warming drawer. on some modelsWhen Using the Warming Drawer Instructions OperatingTo Warm Serving Bowls and Plates Temperature Selection ChartTo Crisp Stale Items Safety Using the self-cleaning ovenBefore a Clean Cycle How to Set the Oven for CleaningHow to Delay the Start of Cleaning Consumer Support Troubleshooting TipsAfter a Clean Cycle Control Knobs Care and cleaning of the rangeHow to Remove Protective Shipping Film and Packaging Tape Oven VentLift-Off Oven Door Painted SurfacesControl Panel Removable Warming Drawer Pan Oven ShelvesStainless Steel Surfaces on some models Do not use a steel wool pad it will scratch the surfaceStorage Drawer Removal on some models Oven Light ReplacementInstructions Safety Oven Heating ElementsBurned-On Residue Cleaning the glass cooktopNormal Daily Use Cleaning Heavy, Burned-On ResidueDamage from Sugary Spills and Melted Plastic Metal Marks and ScratchesCooktop Seal To Order PartsBefore You Call For Service… Problem Possible Causes What To DoRemoval instructions in the Care and cleaning Clock and timer doSee the Using the clock and timer section Not workClean cycle During a clean cycleUnlock Oven not clean after Won’t closeOr letter flash Power outageA number DisplayWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Ge.com Consumer Support Troubleshooting Tips Care and Cleaning Ge.com Accessories Looking For Something More?Care GE Electric Range WarrantyCleaning Troubleshooting Tips Consumer Support GE Will ProvideConsumer Support GE Appliances Website Schedule ServiceParts and Accessories Real Life Design Studio