DeLonghi DEGESC24SS installation instructions Installation Instructions

Page 4

INSTALLATION INSTRUCTIONS

WARNING!

THIS APPLIANCE HAS TO BE INSTALLED BY A QUALIFIED INSTALLER.

Improper installation, adjustment, alteration, services, or maintenance can cause injury or property damage. Consult a qualified installer, service agent, or the gas supplier.

IMPORTANT: The use of suitable protective clothing/gloves is recommended when handling, installing of this appliance.

TOOLS NEEDED FOR INSTALLATION (NOT SUPPLIED WITH THE APPLIANCE)

Screwdriver

2 - Wrench

T-handle

wrench

Pencil

Tape

measure

Suitable protective

gloves

Hammer

Adjustable

wrench

Adjustable

pliers

Drill

4

Image 4
Contents GAS/ELECTRIC Range ALL Ranges can TIP Data Plate Conversion Label Installation Instructions Replacement Parts Electrical Grounding InstructionsElectrical Requirement Air Supply and VentilationProximity to Side Cabinets GAS and Electric ConnectionIt is mandatory to install the backguard Assembling the BackguardANTI-TIP Stability Device Installation Instructions Levelling the RangeExplosion Hazard Manual Shut-off Valve figPressure Regulator Pressure Regulator Installation Step Extension GAS Connection SpecificationPressure regulator Flexible Connections Leak TestingRigid Pipe Connections Conversion to LP/PROPANE GAS Setting the Pressure Regulator figTo remove the warming drawer To set the pressure regulator fig Fitting the warming drawer figSetting the Burner Minimum Operations to be Performed When Substituting the InjectorsInjectors Table Electrical Requirements Electrical Connection with Power CordElectrical Connection with Conduit Wire Power Cord Installation using Strain Relief Supplied Wire Power Cord Installation Wire Conduit Installation Wiring Diagram Energy RegulatorPage Page Page Cod ß4