GE J2S968 manual Care and cleaning of the range, How to Remove Packaging Tape, Control Knobs

Page 29

Care and cleaning of the range.

www.GEAppliances.com

Be sure all controls are off and all surfaces are cool before cleaning any part of the range.

If your range is removed for cleaning, servicing or any reason, be sure the anti-tip device is reengaged properly when the range is replaced. Failure to take this precaution could result in tipping of the range and cause injury.

Safety Instructions

How to Remove Packaging Tape

To assure no damage is done to the finish of the product, the safest way to remove the adhesive left from packaging tape and cooktop labels on new appliances

is an application of a household liquid dishwashing detergent, mineral oil or cooking oil.

Apply with a soft cloth and allow to soak. Wipe dry and then apply an appliance polish to thoroughly clean and protect the surface.

NOTE: The adhesive must be removed from all parts. It cannot be removed if it is baked on.

Operating Instructions

Control Knobs

The control knobs may be removed for easier cleaning.

Before removing the knobs for cleaning, please note that the knobs are in the OFF position. When replacing the

knobs, check the OFF position to insure proper placement.

Wash the knobs in soap and water or a vinegar and hot water solution but do not soak.

Care and

Grate

Burner cap

Burner head

Electrode Burner base

CAUTION: DO NOT OPERATE THE BURNER WITHOUT ALL BURNER PARTS IN PLACE.

Burner Assembly

The burner assemblies should be washed regularly and, of course, after spillovers.

Turn all controls off before removing burner parts.

The burner grates, burner heads and burner caps can be removed for easy cleaning.

The electrode of the spark igniter is exposed beyond the surface of the burner base. When cleaning the cooktop, be careful not to snag the electrode of the spark igniter with your cleaning cloth. Damage to the igniter could occur.

To avoid snagging a cloth on the spark igniter, leave the burner heads in place when cleaning the cooktop.

Be careful not to push in any cooktop controls while cleaning the cooktop. A slight electrical shock might result which could cause you to knock over hot cookware.

Wash burner parts with an all-purpose non-abrasive cleaner and warm water. Soak stubborn soil. Dry them with a cloth—do not reassemble while wet.

To reassemble, replace the burner head first, then the burner cap and finally the burner grate. Be sure the pins in the burner head are properly located in the burner base holes.

Cleaning Troubleshooting Tips Consumer Support

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Write the model and serial numbers here Model # Serial #What to do if YOU Smell GAS All ranges can tip and injury could result Important Safety NoticeProperty damage. The qualified agency Manufacturer’s instructions and all codesRequirements of the authority having Safety Instructions Surface Burners Support Instructions Care and CleaningTips Consumer Troubleshooting Using the gas surface burnersInstructions Tips CareSafety Care and Cleaning Troubleshooting Tips Consumer SupportTop-of-Range Cookware Stove Top GrillsConsumer Support Troubleshooting Tips Care and Cleaning Using the oven controlsFunctions must be reset Been a power outageTroubleshooting Tips Using the ovenSafety Broiling Guide How to Set the Oven for BroilingIf your range is connected to Broiling GuideCleaning Using the clock, timer and control lockoutTips Consumer Support Operating Instructions CareSupport Troubleshooting Tips Care Using the timed baking and roasting featuresSafety Instructions Care and Cleaning Using the probe. on some modelsTroubleshooting Tips Consumer Support Consumer Support Troubleshooting Using the convection ovenHow to Set the Oven for Convection Baking or Roasting Troubleshooting Tips Consumer SupportInstructions Operating Convection RoastConsumer Support Troubleshooting Using the timed features for convection cookingTips Care and Cleaning Operating Instructions Safety Convection Roasting Guide Consumer Support Troubleshooting TipsCleaning Troubleshooting Using the proofing and warming featuresTips Consumer Support Instructions Operating Instructions CareConsumer Support Troubleshooting Tips Care Adjust the oven thermostat-Do it yourselfCleaning Operating Instructions To Adjust the ThermostatCleaning Troubleshooting Tips Consumer Support Using the self-cleaning ovenBefore a Clean Cycle How to Set the Oven for CleaningHow to Delay the Start of Cleaning Consumer Support Troubleshooting Tips CareAfter a Clean Cycle Care and Cleaning Special features of your oven controlSafety Instructions Troubleshooting Tips Consumer SupportThree possible volume levels Tone VolumeHour, 24-Hour or Clock Blackout Start padConverted temperature of 325F Convection baking temperaturesTo turn off this feature Touch the Convection Bake orOperating Instructions Safety Using the Sabbath FeatureTroubleshooting Tips Care and Cleaning How to Exit the Sabbath FeatureHow to Remove Packaging Tape Care and cleaning of the rangeBurner Assembly Control KnobsOven Light Bulbs Instructions SafetyBurner Grates and Center Grate Broiler Pan and Grid Instructions OperatingStorage Drawer Removal Oven Racks and Convection Roasting RackPainted Surfaces Cleaning the Oven DoorLift-Off Oven Door Instructions Operating Instructions Care CleaningTips Troubleshooting Tips Care Cleaning the glass cooktopCleaning Operating Instructions Damage from Sugary Spills and Melted Plastic Cerama Bryte Cleaning Pads forTo Order Parts National PartsConsumer Before you call for service…Problem Possible Causes What To Do Food does not bake Oven temperatureOr roast properly Food does notSee the Using the clock and timer section Clock and timer doSee the Using the self-cleaning oven section During a clean cycleSee the Special features of your oven control section Control signals afterPower outage Or start timeDamage section in the Cleaning the glass cooktop See the Cleaning the glass cooktop sectionScratches may appear As cracks on cooktopWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Troubleshooting Tips Safety InstructionsConsumer Support Operating InstructionsOperating Instructions Looking For Something More? AccessoriesCleaning Operating Instructions Safety InstructionsGE Will Replace What GE Will Not CoverSafety Instructions Operating GE Dual Fuel Range Warranty. For customers in CanadaInstructions Care and Cleaning Camco Will ReplaceConsumer Support GE Appliances Website Schedule Service

J2S968 specifications

The GE J2S968 is a high-performance jet engine that has carved a niche for itself in the aviation industry, particularly in corporate and regional jet markets. Designed with the latest technologies, the J2S968 combines efficiency, reliability, and advanced engineering to meet the demands of modern aviation.

One of the standout features of the J2S968 is its turbofan design, which significantly enhances its operational efficiency compared to traditional turbojet engines. The engine employs a wide-chord fan blade technology that not only improves thrust but also minimizes noise levels, adhering to strict environmental regulations. This makes the J2S968 an ideal choice for operators prioritizing sustainability without compromising performance.

Another key characteristic of the J2S968 is its power and thrust capabilities. With a thrust range that typically exceeds 4,000 pounds, this engine can support a variety of aircraft sizes. This engine is particularly favored in the business aviation sector, where performance and range are critical. The advanced materials used in its construction also contribute to weight reduction, further enhancing fuel efficiency and overall performance.

The GE J2S968 incorporates advanced digital engine control systems, which facilitate precise power management and optimize fuel consumption. This technology allows for more efficient operation throughout different phases of flight, translating into reduced operational costs for operators. Enhanced diagnostic capabilities are also a key component, enabling real-time monitoring of engine performance, which aids in maintenance and prolongs service life.

In terms of maintenance, the J2S968 is designed with accessibility in mind. Its modular architecture allows for quick and easy servicing, reducing downtime and ensuring higher aircraft availability. This is particularly important for business aviation where time is often of the essence.

The engine's reliability is further underscored by its track record. Built on GE's extensive experience in the aerospace sector, the J2S968 benefits from rigorous testing and certification processes, ensuring it meets the highest safety and performance standards.

In summary, the GE J2S968 represents a fusion of cutting-edge technology, efficient performance, and reliability. Its significant advancements in turbofan design, power management, and maintenance make it a preferred choice for regional jets and business aircraft. As the aviation industry continues to evolve, the J2S968 stands as a testament to GE's commitment to innovation and excellence in aerospace engineering.
Top Page Image Contents