GE J2S968 Cleaning the glass cooktop, Cleaning Operating Instructions, Troubleshooting Tips Care

Page 34

Safety Instructions

Cleaning the glass cooktop.

Control Lockout

Begin by locking the cooktop; see the

Control Lockout section.

Normal Daily Use Cleaning

Cleaning Operating Instructions

Clean your cooktop after each spill. Use CERAMA BRYTE® Ceramic Cooktop Cleaner.

ONLY use CERAMA BRYTE® Ceramic Cooktop Cleaner on the glass cooktop. Other creams may not be as effective.

To maintain and protect the surface of your glass cooktop, follow these steps:

Before using the cooktop for the first time, clean it with CERAMA BRYTE® Ceramic Cooktop Cleaner. This helps protect the top and makes cleanup easier.

Daily use of CERAMA BRYTE® Ceramic Cooktop Cleaner will help keep the cooktop looking new.

Remove the burner grates and vent grille.

Shake the cleaning cream well. Apply a few drops of CERAMA BRYTE® Ceramic Cooktop Cleaner directly to the cooktop.

Use a paper towel or CERAMA BRYTE® Cleaning Pad for Ceramic Cooktops to clean the entire cooktop surface.

Use a dry cloth or paper towel to remove all cleaning residue. No need to rinse.

NOTE: It is very important that you DO NOT heat the cooktop until it has been cleaned thoroughly.

Troubleshooting Tips Care and

Use a CERAMA BRYTE® Cleaning Pad for Ceramic Cooktops or a Scotch-Brite®Multi-Purpose No Scratch blue scrub pad.

Burned-On Residue

WARNING: DAMAGE to your glass surface may occur if you use scrub pads other than the pad included with your cooktop.

Allow the cooktop to cool.

Remove the burner grates and vent grille.

Spread a few drops of CERAMA BRYTE® Ceramic Cooktop Cleaner on the entire burned residue area.

Using the included CERAMA BRYTE® Cleaning Pad for Ceramic

Cooktops, rub the residue area, applying pressure as needed.

If any residue remains, repeat the steps listed above as needed.

For additional protection, after all residue has been removed, polish the entire surface with CERAMA BRYTE® Ceramic Cooktop Cleaner and a paper towel.

Heavy, Burned-On Residue

Consumer Support

The CERAMA BRYTE® Ceramic Cooktop Scraper and all recommended supplies are available through our Parts Center. See instructions under “To Order Parts” section on next page.

NOTE: Do not use a dull or nicked blade.

34

Allow the cooktop to cool.

Remove the burner grates and vent grille.

Use a single-edge razor blade scraper at approximately a 45° angle against the glass surface and scrape the soil. It will be necessary to apply pressure to the razor scraper in order to remove the residue.

After scraping with the razor scraper, spread a few drops of CERAMA BRYTE® Ceramic

Cooktop Cleaner on the entire burned residue area. Use the CERAMA BRYTE® Cleaning Pad to remove any remaining residue.

For additional protection, after all residue has been removed, polish the entire surface with CERAMA BRYTE® Ceramic Cooktop Cleaner and a paper towel.

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Model # Serial # Write the model and serial numbers hereWhat to do if YOU Smell GAS Important Safety Notice All ranges can tip and injury could resultRequirements of the authority having Manufacturer’s instructions and all codesProperty damage. The qualified agency Safety Instructions Surface Burners Tips Consumer Instructions Care and CleaningSupport Instructions Using the gas surface burnersTroubleshooting Tips CareTop-of-Range Cookware Care and Cleaning Troubleshooting Tips Consumer SupportSafety Stove Top GrillsFunctions must be reset Using the oven controlsConsumer Support Troubleshooting Tips Care and Cleaning Been a power outageSafety Using the ovenTroubleshooting Tips If your range is connected to How to Set the Oven for BroilingBroiling Guide Broiling GuideTips Consumer Support Using the clock, timer and control lockoutCleaning Operating Instructions CareSafety Instructions Using the timed baking and roasting featuresSupport Troubleshooting Tips Care Troubleshooting Tips Consumer Support Using the probe. on some modelsCare and Cleaning Using the convection oven Consumer Support TroubleshootingInstructions Operating Troubleshooting Tips Consumer SupportHow to Set the Oven for Convection Baking or Roasting Convection RoastTips Care and Cleaning Operating Instructions Using the timed features for convection cookingConsumer Support Troubleshooting Safety Consumer Support Troubleshooting Tips Convection Roasting GuideTips Consumer Support Using the proofing and warming featuresCleaning Troubleshooting Instructions Operating Instructions CareCleaning Operating Instructions Adjust the oven thermostat-Do it yourselfConsumer Support Troubleshooting Tips Care To Adjust the ThermostatBefore a Clean Cycle Using the self-cleaning ovenCleaning Troubleshooting Tips Consumer Support How to Set the Oven for CleaningAfter a Clean Cycle Consumer Support Troubleshooting Tips CareHow to Delay the Start of Cleaning Safety Instructions Special features of your oven controlCare and Cleaning Troubleshooting Tips Consumer SupportHour, 24-Hour or Clock Blackout Tone VolumeThree possible volume levels Start padTo turn off this feature Convection baking temperaturesConverted temperature of 325F Touch the Convection Bake orTroubleshooting Tips Care and Cleaning Using the Sabbath FeatureOperating Instructions Safety How to Exit the Sabbath FeatureBurner Assembly Care and cleaning of the rangeHow to Remove Packaging Tape Control KnobsBurner Grates and Center Grate Instructions SafetyOven Light Bulbs Storage Drawer Removal Instructions OperatingBroiler Pan and Grid Oven Racks and Convection Roasting RackLift-Off Oven Door Cleaning the Oven DoorPainted Surfaces Tips CleaningInstructions Operating Instructions Care Cleaning Operating Instructions Cleaning the glass cooktopTroubleshooting Tips Care To Order Parts Cerama Bryte Cleaning Pads forDamage from Sugary Spills and Melted Plastic National PartsProblem Possible Causes What To Do Before you call for service…Consumer Or roast properly Oven temperatureFood does not bake Food does notSee the Using the self-cleaning oven section Clock and timer doSee the Using the clock and timer section During a clean cyclePower outage Control signals afterSee the Special features of your oven control section Or start timeScratches may appear See the Cleaning the glass cooktop sectionDamage section in the Cleaning the glass cooktop As cracks on cooktopWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Consumer Support Safety InstructionsTroubleshooting Tips Operating InstructionsOperating Instructions Accessories Looking For Something More?GE Will Replace Instructions Safety InstructionsCleaning Operating What GE Will Not CoverInstructions Care and Cleaning GE Dual Fuel Range Warranty. For customers in CanadaSafety Instructions Operating Camco Will ReplaceGE Appliances Website Schedule Service Consumer Support

J2S968 specifications

The GE J2S968 is a high-performance jet engine that has carved a niche for itself in the aviation industry, particularly in corporate and regional jet markets. Designed with the latest technologies, the J2S968 combines efficiency, reliability, and advanced engineering to meet the demands of modern aviation.

One of the standout features of the J2S968 is its turbofan design, which significantly enhances its operational efficiency compared to traditional turbojet engines. The engine employs a wide-chord fan blade technology that not only improves thrust but also minimizes noise levels, adhering to strict environmental regulations. This makes the J2S968 an ideal choice for operators prioritizing sustainability without compromising performance.

Another key characteristic of the J2S968 is its power and thrust capabilities. With a thrust range that typically exceeds 4,000 pounds, this engine can support a variety of aircraft sizes. This engine is particularly favored in the business aviation sector, where performance and range are critical. The advanced materials used in its construction also contribute to weight reduction, further enhancing fuel efficiency and overall performance.

The GE J2S968 incorporates advanced digital engine control systems, which facilitate precise power management and optimize fuel consumption. This technology allows for more efficient operation throughout different phases of flight, translating into reduced operational costs for operators. Enhanced diagnostic capabilities are also a key component, enabling real-time monitoring of engine performance, which aids in maintenance and prolongs service life.

In terms of maintenance, the J2S968 is designed with accessibility in mind. Its modular architecture allows for quick and easy servicing, reducing downtime and ensuring higher aircraft availability. This is particularly important for business aviation where time is often of the essence.

The engine's reliability is further underscored by its track record. Built on GE's extensive experience in the aerospace sector, the J2S968 benefits from rigorous testing and certification processes, ensuring it meets the highest safety and performance standards.

In summary, the GE J2S968 represents a fusion of cutting-edge technology, efficient performance, and reliability. Its significant advancements in turbofan design, power management, and maintenance make it a preferred choice for regional jets and business aircraft. As the aviation industry continues to evolve, the J2S968 stands as a testament to GE's commitment to innovation and excellence in aerospace engineering.
Top Page Image Contents