Sherwood RD-6513 manual Operations, Listening to a Program Source, Before operation

Page 14

RD-6513(A) 2008.8.21 12:19 PM 페이지 15

Operations

Note : Before operating this receiver, first set this unit as desired for optimum performance, doing the system setup procedures. (For details, refer to "System Setup" on page 29.)

LISTENING TO A PROGRAM SOURCE

Before operation

•Enter the standby mode.

•The STANDBY indicator lights up. This means that the receiver is not

disconnected from the AC mains and a small amount of current is retained to support the operation readiness.

•To switch the power off, push the POWER switch again.

•Then the power is cut off and the STANDBY indicator goes off.

1.In the standby mode, turn the power on.

or

•Each time the POWER ON/STANDBY button on the front panel is pressed, the receiver is turned on to enter the operating mode or off to enter the standby mode.

•On the remote control, press the POWER ON button to enter the operating mode or press the STANDBY button to enter the standby mode.

•In the standby mode, if the INPUT SELECTOR button is pressed, the receiver is turned on automatically and the desired input is selected.

2. Switch the speakers on.

•Then the SPEAKER indicator lights up and the sound can be heard from the speakers connected to the speaker terminals.

•When using the headphone for private listening, press the SPEAKER button again to switch the speakers off.

3. Select the desired input source.

•Each time the "VIDEO" button on the front panel is pressed, the input source changes as follows:

VIDEO 1 ↔ VIDEO 2

•Each time the "AUDIO" button on the front panel is pressed, the input source changes as follows:

→ CD → F AUX → TAPE → BT IN

•Each time the "FM/AM" button is pressed, the band changes as follows:

→FM ST → FM MONO → AM

When selecting the EXTERNAL IN as desired

•"EXT IN" is displayed and 6 seperate analog signals from the component connected to this input pass through the tone and volume circuits only and can be heard from your speakers.

•Selecting the desired input source to cancel the external in function.

•These analog signals can be heard only, not recorded.

ENGLISH

15

Page 13 Page 15
Image 14
Page 13 Page 15
Contents RD-6513 Important Safety Instructions Introduction 120Contents Connecting Antennas System ConnectionsConnecting Video Components Hdmi High Definition Multimedia Interface connectionConnecting Audio Components Connecting Subwoofer PRE OUT Surround left and right speakers Speaker placementFront left and right speakers and center speaker SubwooferSetup MIC Jack Front Panel ControlsSetup MIC Jack Remote Controls Remote Control Operation Range Loading BatteriesBefore operation OperationsListening to a Program Source Select the digital or the analog input connected as desired Adjust the overall volumeTo listen with the headphones Operate the selected component for playbackAdjusting the tone bass and treble Enter the tone modeDTS 96/24 Surround SoundSurround modes DTS Digital Surround Dolby Digital2CH downmix mode When CD or Video 1 ~ 2 is selected as an input sourceTo cancel the surround mode for stereo playback Enjoying Surround SoundRepeat the above steps 2 and 3 to adjust other parameters When adjusting the sound parametersWhen selecting the DRCDynamic Range Compression Night mode Press the Sound Parameter buttonCancel the test tone function Adjusting each channel level with test toneEnter the test tone mode Repeat the above steps 2 and 3 to adjust each channel level Adjusting the current channel levelAdjust the level of the selected channel as desired Press the Channel Level buttonConfirm your selection Memorizing the adjusted channel levelsSelect the desired one of REF 1 and REF Recalling the memorized channel levelsAuto presetting Auto tuningManual tuning Listening to Radio BroadcastsRepeat the above steps1 to 3 to memorize other stations Manual presettingTuning to preset stations Dubbing from video components onto Video RecordingRecording with Tape Dubbing the audio and video signals separately onto Video Other Functions Operating the sleep timerAdjusting the brightness of the fluorescent display Displaying the operation statusSystem Setup Setup menu flow Setting the System When selecting the Subwoofer modeWhen selecting the Tone Setting the Input Press the Cursor UP/DOWN buttons to select the desired itemWhen selecting the Auto Surround Setting the Speaker SetupWhen selecting the Digital When selecting the Auto Setup PreparationsWhen selecting the Configuration About the speaker sizeWhen selecting the Distance About the speaker distanceWhen selecting the Crossover About the crossover frequencySetting the CH Level Repeat the above steps 1 and 2 to adjust each channel levelPress the Cursor UP/DOWN buttons to select the Mode ~ Setting the Parameter When selecting the Night ModeWhen selecting the Dolby Plii Music Troubleshooting Guide Problem Possible Cause RemedySpecifications RD-6513

RD-6513 specifications

The Sherwood RD-6513 is a versatile and robust receiver that has garnered attention for its impressive array of features and technologies designed to enhance audio and home theater experiences. As a part of Sherwood's long-standing tradition of quality audio equipment, the RD-6513 stands out with its combination of performance, functionality, and affordability.

One of the main features of the Sherwood RD-6513 is its powerful amplification. With a rated output of up to 100 watts per channel, this receiver is capable of driving a wide range of speakers, making it suitable for various home entertainment setups. The unit supports a variety of speaker configurations, including 2-channel, 5.1 surround sound, and more, making it adaptable to different viewing preferences and room sizes.

Another notable characteristic of the RD-6513 is its extensive connectivity options. It is equipped with multiple HDMI inputs, component video outputs, and analog audio connections, providing users with the flexibility to connect a variety of devices, such as Blu-ray players, gaming consoles, and streaming devices. The HDMI capabilities allow for high-definition video and audio pass-through, ensuring that users can enjoy the best quality from their entertainment sources.

The Sherwood RD-6513 also features advanced audio processing technologies, including Dolby Digital and DTS surround sound decoding. These technologies enhance the audio experience by providing immersive soundscapes that are particularly beneficial for film and gaming enthusiasts. Additionally, the receiver supports a range of audio formats, making it compatible with high-resolution audio files and streaming services.

For user convenience, the RD-6513 offers an intuitive on-screen display and an easy-to-navigate menu system. The included remote control allows users to make adjustments from the comfort of their couch, further enhancing the overall user experience. This attention to usability is an essential characteristic of the Sherwood brand.

In conclusion, the Sherwood RD-6513 is a feature-rich receiver that brings together impressive amplification, extensive connectivity, advanced audio processing, and user-friendly controls. It serves as a solid foundation for a high-quality home theater system, making it an appealing choice for audiophiles and casual listeners alike. With its blend of performance and technology, the RD-6513 remains a competitive option in the ever-evolving landscape of audio receivers.
Top Page Image Contents