Sherwood RD-6513 Select the digital or the analog input connected as desired, To mute the sound

Page 15

RD-6513(A) 2008.8.21 12:19 PM 페이지 16

When CD, VIDEO 1~ 2 is selected as an input source

4. Select the digital or the analog input connected as desired.

ENGLISH

•Each time this button is pressed, the corresponding input is selected as follows:

→o(ptical) → c(oaxial)1→ c(oaxial) 2 → A(nalog)

Notes :

•When F AUX, TAPE, BT IN, EXT IN or tuner is selected as an input source, the digital input cannot be selected.

•When the selected digital input is not connected, the "DIGITAL" indicator flickers and the analog input is automatically selected.

•The selected digital or analog input is automatically assigned to the corresponding input source on the INPUT setup menu. (For details, refer to "SETTING THE INPUT " on page 33.)

•The sound from the component connected to the selected digital input can be heard regardless of the selected input source.

5.Operate the selected component for playback.

•When playing back the program sources with surround sound, refer to “ENJOYING SURROUND SOUND” on page 19.

6. Adjust the (overall) volume.

DOWNUP

7. To mute the sound.

•“MUTE” will flicker.

•To resume the previous sound level, press it again.

8. To listen with the headphones.

•Be sure to switch the speakers off.

•When listening to a DTS or Dolby Digital program source, if the headphones are plugged in and the SPEAKER button is set to off, it enters the 2CH downmix mode automatically. (For details, refer to "2CH downmix mode" on page 19.)

Note :

•Be careful not to set the volume too high when using headphones.

16

Page 14 Page 16
Image 15
Page 14 Page 16
Contents RD-6513 Important Safety Instructions 120 IntroductionContents System Connections Connecting AntennasHdmi High Definition Multimedia Interface connection Connecting Video ComponentsConnecting Audio Components Connecting Subwoofer PRE OUT Subwoofer Speaker placementFront left and right speakers and center speaker Surround left and right speakersFront Panel Controls Setup MIC JackSetup MIC Jack Remote Controls Loading Batteries Remote Control Operation RangeOperations Listening to a Program SourceBefore operation Operate the selected component for playback Adjust the overall volumeTo listen with the headphones Select the digital or the analog input connected as desiredEnter the tone mode Adjusting the tone bass and trebleDolby Digital Surround SoundSurround modes DTS Digital Surround DTS 96/24Enjoying Surround Sound When CD or Video 1 ~ 2 is selected as an input sourceTo cancel the surround mode for stereo playback 2CH downmix modePress the Sound Parameter button When adjusting the sound parametersWhen selecting the DRCDynamic Range Compression Night mode Repeat the above steps 2 and 3 to adjust other parametersAdjusting each channel level with test tone Enter the test tone modeCancel the test tone function Press the Channel Level button Adjusting the current channel levelAdjust the level of the selected channel as desired Repeat the above steps 2 and 3 to adjust each channel levelRecalling the memorized channel levels Memorizing the adjusted channel levelsSelect the desired one of REF 1 and REF Confirm your selectionListening to Radio Broadcasts Auto tuningManual tuning Auto presettingManual presetting Tuning to preset stationsRepeat the above steps1 to 3 to memorize other stations Recording Recording with TapeDubbing from video components onto Video Dubbing the audio and video signals separately onto Video Displaying the operation status Operating the sleep timerAdjusting the brightness of the fluorescent display Other FunctionsSystem Setup Setup menu flow When selecting the Subwoofer mode Setting the SystemWhen selecting the Tone Press the Cursor UP/DOWN buttons to select the desired item Setting the InputSetting the Speaker Setup When selecting the DigitalWhen selecting the Auto Surround Preparations When selecting the Auto SetupAbout the speaker size When selecting the ConfigurationAbout the speaker distance When selecting the DistanceAbout the crossover frequency When selecting the CrossoverRepeat the above steps 1 and 2 to adjust each channel level Setting the CH LevelPress the Cursor UP/DOWN buttons to select the Mode ~ When selecting the Night Mode Setting the ParameterWhen selecting the Dolby Plii Music Problem Possible Cause Remedy Troubleshooting GuideSpecifications RD-6513

RD-6513 specifications

The Sherwood RD-6513 is a versatile and robust receiver that has garnered attention for its impressive array of features and technologies designed to enhance audio and home theater experiences. As a part of Sherwood's long-standing tradition of quality audio equipment, the RD-6513 stands out with its combination of performance, functionality, and affordability.

One of the main features of the Sherwood RD-6513 is its powerful amplification. With a rated output of up to 100 watts per channel, this receiver is capable of driving a wide range of speakers, making it suitable for various home entertainment setups. The unit supports a variety of speaker configurations, including 2-channel, 5.1 surround sound, and more, making it adaptable to different viewing preferences and room sizes.

Another notable characteristic of the RD-6513 is its extensive connectivity options. It is equipped with multiple HDMI inputs, component video outputs, and analog audio connections, providing users with the flexibility to connect a variety of devices, such as Blu-ray players, gaming consoles, and streaming devices. The HDMI capabilities allow for high-definition video and audio pass-through, ensuring that users can enjoy the best quality from their entertainment sources.

The Sherwood RD-6513 also features advanced audio processing technologies, including Dolby Digital and DTS surround sound decoding. These technologies enhance the audio experience by providing immersive soundscapes that are particularly beneficial for film and gaming enthusiasts. Additionally, the receiver supports a range of audio formats, making it compatible with high-resolution audio files and streaming services.

For user convenience, the RD-6513 offers an intuitive on-screen display and an easy-to-navigate menu system. The included remote control allows users to make adjustments from the comfort of their couch, further enhancing the overall user experience. This attention to usability is an essential characteristic of the Sherwood brand.

In conclusion, the Sherwood RD-6513 is a feature-rich receiver that brings together impressive amplification, extensive connectivity, advanced audio processing, and user-friendly controls. It serves as a solid foundation for a high-quality home theater system, making it an appealing choice for audiophiles and casual listeners alike. With its blend of performance and technology, the RD-6513 remains a competitive option in the ever-evolving landscape of audio receivers.
Top Page Image Contents