Sherwood RD-6513 manual When selecting the Configuration, About the speaker size

Page 35

RD-6513(A) 2008.8.21 12:20 PM 페이지 36

When selecting the CONFIGURATION

1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the "CONFIG", then press the ENTER button.

ENGLISH

2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired speaker.

3. Press the CURSOR LEFT(◀)/ RIGHT(▶) buttons to set the selected speaker as desired.

• Depending on your speaker type, you can select one of these following speaker types.

L(Large): Select this when connecting speakers that can fully reproduce sounds below crossover frequency.

S(Small) : Select this when connecting speakers that can not fully reproduce sounds below crossover frequency. When this is selected, sounds below crossover frequency are sent to the subwoofer or speakers which are set to "L (Large)" (when not using a subwoofer)

N(None): Select this when no speakers are connected. When this is selected, sounds are sent to the speakers which are not set to "N (None)".

Y(Yes)/N(No): Select the desired depending on whether a subwoofer is connected or not.

Notes :

•When speakers are set to "S (Small)", you should set their crossover frequency correctly according to their frequency characteristics. (For details, refer to "When selecting the CROSSOVER" on page 38.)

•When "SUB-W" is set to "N (No)", "FRONT" is automatically set to "L (Large)".

•When the "FRONT" is set to "S (Small)", "CENTER" and "SURR" cannot be set to "L (Large)".

4. Repeat the above steps 2 and 3 until the speakers are all set to the desired mode.

About the speaker size

•Select "L (Large)" or "S (Small)" not according to the actual size of the speaker but according to the speaker's capacity for playing low frequency (bass sound below frequency set on the "X-OVER" menu) signals.

•If you do not know, try comparing the sound at both settings (setting the volume to a level low enough so as not to damage the speakers) to determine the proper setting.

36

Page 34 Page 36
Image 35
Page 34 Page 36
Contents RD-6513 Important Safety Instructions 120 IntroductionContents System Connections Connecting AntennasHdmi High Definition Multimedia Interface connection Connecting Video ComponentsConnecting Audio Components Connecting Subwoofer PRE OUT Subwoofer Speaker placementFront left and right speakers and center speaker Surround left and right speakersFront Panel Controls Setup MIC JackSetup MIC Jack Remote Controls Loading Batteries Remote Control Operation RangeBefore operation OperationsListening to a Program Source Operate the selected component for playback Adjust the overall volumeTo listen with the headphones Select the digital or the analog input connected as desiredEnter the tone mode Adjusting the tone bass and trebleDolby Digital Surround SoundSurround modes DTS Digital Surround DTS 96/24Enjoying Surround Sound When CD or Video 1 ~ 2 is selected as an input sourceTo cancel the surround mode for stereo playback 2CH downmix modePress the Sound Parameter button When adjusting the sound parametersWhen selecting the DRCDynamic Range Compression Night mode Repeat the above steps 2 and 3 to adjust other parametersCancel the test tone function Adjusting each channel level with test toneEnter the test tone mode Press the Channel Level button Adjusting the current channel levelAdjust the level of the selected channel as desired Repeat the above steps 2 and 3 to adjust each channel levelRecalling the memorized channel levels Memorizing the adjusted channel levelsSelect the desired one of REF 1 and REF Confirm your selectionListening to Radio Broadcasts Auto tuningManual tuning Auto presettingRepeat the above steps1 to 3 to memorize other stations Manual presettingTuning to preset stations Dubbing from video components onto Video RecordingRecording with Tape Dubbing the audio and video signals separately onto Video Displaying the operation status Operating the sleep timerAdjusting the brightness of the fluorescent display Other FunctionsSystem Setup Setup menu flow When selecting the Subwoofer mode Setting the SystemWhen selecting the Tone Press the Cursor UP/DOWN buttons to select the desired item Setting the InputWhen selecting the Auto Surround Setting the Speaker SetupWhen selecting the Digital Preparations When selecting the Auto SetupAbout the speaker size When selecting the ConfigurationAbout the speaker distance When selecting the DistanceAbout the crossover frequency When selecting the CrossoverRepeat the above steps 1 and 2 to adjust each channel level Setting the CH LevelPress the Cursor UP/DOWN buttons to select the Mode ~ When selecting the Night Mode Setting the ParameterWhen selecting the Dolby Plii Music Problem Possible Cause Remedy Troubleshooting GuideSpecifications RD-6513

RD-6513 specifications

The Sherwood RD-6513 is a versatile and robust receiver that has garnered attention for its impressive array of features and technologies designed to enhance audio and home theater experiences. As a part of Sherwood's long-standing tradition of quality audio equipment, the RD-6513 stands out with its combination of performance, functionality, and affordability.

One of the main features of the Sherwood RD-6513 is its powerful amplification. With a rated output of up to 100 watts per channel, this receiver is capable of driving a wide range of speakers, making it suitable for various home entertainment setups. The unit supports a variety of speaker configurations, including 2-channel, 5.1 surround sound, and more, making it adaptable to different viewing preferences and room sizes.

Another notable characteristic of the RD-6513 is its extensive connectivity options. It is equipped with multiple HDMI inputs, component video outputs, and analog audio connections, providing users with the flexibility to connect a variety of devices, such as Blu-ray players, gaming consoles, and streaming devices. The HDMI capabilities allow for high-definition video and audio pass-through, ensuring that users can enjoy the best quality from their entertainment sources.

The Sherwood RD-6513 also features advanced audio processing technologies, including Dolby Digital and DTS surround sound decoding. These technologies enhance the audio experience by providing immersive soundscapes that are particularly beneficial for film and gaming enthusiasts. Additionally, the receiver supports a range of audio formats, making it compatible with high-resolution audio files and streaming services.

For user convenience, the RD-6513 offers an intuitive on-screen display and an easy-to-navigate menu system. The included remote control allows users to make adjustments from the comfort of their couch, further enhancing the overall user experience. This attention to usability is an essential characteristic of the Sherwood brand.

In conclusion, the Sherwood RD-6513 is a feature-rich receiver that brings together impressive amplification, extensive connectivity, advanced audio processing, and user-friendly controls. It serves as a solid foundation for a high-quality home theater system, making it an appealing choice for audiophiles and casual listeners alike. With its blend of performance and technology, the RD-6513 remains a competitive option in the ever-evolving landscape of audio receivers.
Top Page Image Contents