Sherwood RD-6513 manual Adjusting the tone bass and treble, Enter the tone mode

Page 16

RD-6513(A) 2008.8.21 12:19 PM 페이지 17

Adjusting the tone (bass and treble)

9. Enter the tone mode.

• The tone mode is displayed for several seconds.

10. Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to select the desired tone mode.

•Each time these buttons are pressed, the tone mode is selected as follows :

OFF : To listen to a program source without the tone

↕effect. ("DIR" indicator lights up.)

ON : To adjust the tone for your taste. ("DIR" indicator goes off.)

Note :

•When the EXTERNAL IN is selected as an input source, the TONE cannot be set to ON.

When the TONE is set to ON to adjust the tone (bass and treble).

11. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired tone.

ENGLISH

•Each time these buttons are pressed, the tone is selected as follows :

→BASS ↔ TRBL (treble) ↔ TONE : ON ←

12. Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to adjust the selected tone as desired.

•The tone level can be adjusted within the range of -10 ~ +10 dB.

•In general, we recommend the bass and treble to be adjusted to 0 dB (flat level).

•Extreme settings at high volume may damage your speakers.

•To complete tone adjustment, repeat the above steps 11 and 12.

•If the tone display disappears, start from the step 9 again.

17

Page 15 Page 17
Image 16
Page 15 Page 17
Contents RD-6513 Important Safety Instructions Introduction 120Contents Connecting Antennas System ConnectionsConnecting Video Components Hdmi High Definition Multimedia Interface connectionConnecting Audio Components Connecting Subwoofer PRE OUT Speaker placement Front left and right speakers and center speakerSurround left and right speakers SubwooferSetup MIC Jack Front Panel ControlsSetup MIC Jack Remote Controls Remote Control Operation Range Loading BatteriesListening to a Program Source OperationsBefore operation Adjust the overall volume To listen with the headphonesSelect the digital or the analog input connected as desired Operate the selected component for playbackAdjusting the tone bass and treble Enter the tone modeSurround Sound Surround modes DTS Digital SurroundDTS 96/24 Dolby DigitalWhen CD or Video 1 ~ 2 is selected as an input source To cancel the surround mode for stereo playback2CH downmix mode Enjoying Surround SoundWhen adjusting the sound parameters When selecting the DRCDynamic Range Compression Night modeRepeat the above steps 2 and 3 to adjust other parameters Press the Sound Parameter buttonEnter the test tone mode Adjusting each channel level with test toneCancel the test tone function Adjusting the current channel level Adjust the level of the selected channel as desiredRepeat the above steps 2 and 3 to adjust each channel level Press the Channel Level buttonMemorizing the adjusted channel levels Select the desired one of REF 1 and REFConfirm your selection Recalling the memorized channel levelsAuto tuning Manual tuningAuto presetting Listening to Radio BroadcastsTuning to preset stations Manual presettingRepeat the above steps1 to 3 to memorize other stations Recording with Tape RecordingDubbing from video components onto Video Dubbing the audio and video signals separately onto Video Operating the sleep timer Adjusting the brightness of the fluorescent displayOther Functions Displaying the operation statusSystem Setup Setup menu flow Setting the System When selecting the Subwoofer modeWhen selecting the Tone Setting the Input Press the Cursor UP/DOWN buttons to select the desired itemWhen selecting the Digital Setting the Speaker SetupWhen selecting the Auto Surround When selecting the Auto Setup PreparationsWhen selecting the Configuration About the speaker sizeWhen selecting the Distance About the speaker distanceWhen selecting the Crossover About the crossover frequencySetting the CH Level Repeat the above steps 1 and 2 to adjust each channel levelPress the Cursor UP/DOWN buttons to select the Mode ~ Setting the Parameter When selecting the Night ModeWhen selecting the Dolby Plii Music Troubleshooting Guide Problem Possible Cause RemedySpecifications RD-6513

RD-6513 specifications

The Sherwood RD-6513 is a versatile and robust receiver that has garnered attention for its impressive array of features and technologies designed to enhance audio and home theater experiences. As a part of Sherwood's long-standing tradition of quality audio equipment, the RD-6513 stands out with its combination of performance, functionality, and affordability.

One of the main features of the Sherwood RD-6513 is its powerful amplification. With a rated output of up to 100 watts per channel, this receiver is capable of driving a wide range of speakers, making it suitable for various home entertainment setups. The unit supports a variety of speaker configurations, including 2-channel, 5.1 surround sound, and more, making it adaptable to different viewing preferences and room sizes.

Another notable characteristic of the RD-6513 is its extensive connectivity options. It is equipped with multiple HDMI inputs, component video outputs, and analog audio connections, providing users with the flexibility to connect a variety of devices, such as Blu-ray players, gaming consoles, and streaming devices. The HDMI capabilities allow for high-definition video and audio pass-through, ensuring that users can enjoy the best quality from their entertainment sources.

The Sherwood RD-6513 also features advanced audio processing technologies, including Dolby Digital and DTS surround sound decoding. These technologies enhance the audio experience by providing immersive soundscapes that are particularly beneficial for film and gaming enthusiasts. Additionally, the receiver supports a range of audio formats, making it compatible with high-resolution audio files and streaming services.

For user convenience, the RD-6513 offers an intuitive on-screen display and an easy-to-navigate menu system. The included remote control allows users to make adjustments from the comfort of their couch, further enhancing the overall user experience. This attention to usability is an essential characteristic of the Sherwood brand.

In conclusion, the Sherwood RD-6513 is a feature-rich receiver that brings together impressive amplification, extensive connectivity, advanced audio processing, and user-friendly controls. It serves as a solid foundation for a high-quality home theater system, making it an appealing choice for audiophiles and casual listeners alike. With its blend of performance and technology, the RD-6513 remains a competitive option in the ever-evolving landscape of audio receivers.
Top Page Image Contents