Sherwood RD-6513 manual Connecting Video Components

Page 6

RD-6513(A) 2008.8.21 12:19 PM 페이지 7

2. CONNECTING VIDEO COMPONENTS

ENGLISH

•The jacks of VIDEO 1 may also be connected to a DVD recorder or other digital video recording component. For details, refer to the operating instructions of the component to be connected.

•The jacks of VIDEO 2 can also be connected to an additional video component such as a cable TV tuner, an LD player or satellite system.

•There are three types of video jacks (COMPONENT, S-VIDEO, (composite) VIDEO) for analog video connections and the HDMI connectors for digital video and audio connections. Connect them to the corresponding video jacks according to their capability.

•For your reference, the excellence in picture quality is as follows : "HDMI” > "COMPONENT" > "S-VIDEO" > "(composite) VIDEO".

•When making COMPONENT VIDEO connections, connect "Y" to "Y", "PB/CB" to "CB"(or "B-Y", "PB") and "PR/CR" to "CR"(or "R-Y", "PR").

Note :

•When recording video program sources through VIDEO 1 OUT jacks or viewing video program sources through MONITOR OUT jack, you must use the same type of video jacks that you did connect to video playback components such as DVD player, LD player, etc.

HDMI (High Definition Multimedia Interface) connection : (*)

•You can connect the source component (DVD player, etc.) to the display component (TV, projector, etc.) through this receiver with using a commercially available HDMI cord.

•The HDMI connection can carry uncompressed digital video signals and digital audio signals.

•This receiver can output digital video and digital audio signals from the HDMI MONITOR OUT of this receiver without passing through any circuits as they were input into the HDMI IN(, meaning the audio signals which are input into the HDMI IN cannot be reproduced on this receiver).

•This receiver is HDMI Ver. 1.3 compatible.

•HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC.

Notes :

•Depending on the connected component, unreliable signal transfer may happen. (For details, refer to the operating instruction of your component.)

•For stable signal transfer, we recommend using HDMI cords that are a maximum of 5 meters in length.

7

Page 5 Page 7
Image 6
Page 5 Page 7
Contents RD-6513 Important Safety Instructions Introduction 120Contents Connecting Antennas System ConnectionsConnecting Video Components Hdmi High Definition Multimedia Interface connectionConnecting Audio Components Connecting Subwoofer PRE OUT Surround left and right speakers Speaker placementFront left and right speakers and center speaker SubwooferSetup MIC Jack Front Panel ControlsSetup MIC Jack Remote Controls Remote Control Operation Range Loading BatteriesOperations Listening to a Program SourceBefore operation Select the digital or the analog input connected as desired Adjust the overall volumeTo listen with the headphones Operate the selected component for playbackAdjusting the tone bass and treble Enter the tone modeDTS 96/24 Surround SoundSurround modes DTS Digital Surround Dolby Digital2CH downmix mode When CD or Video 1 ~ 2 is selected as an input sourceTo cancel the surround mode for stereo playback Enjoying Surround SoundRepeat the above steps 2 and 3 to adjust other parameters When adjusting the sound parametersWhen selecting the DRCDynamic Range Compression Night mode Press the Sound Parameter buttonAdjusting each channel level with test tone Enter the test tone modeCancel the test tone function Repeat the above steps 2 and 3 to adjust each channel level Adjusting the current channel levelAdjust the level of the selected channel as desired Press the Channel Level buttonConfirm your selection Memorizing the adjusted channel levelsSelect the desired one of REF 1 and REF Recalling the memorized channel levelsAuto presetting Auto tuningManual tuning Listening to Radio BroadcastsManual presetting Tuning to preset stationsRepeat the above steps1 to 3 to memorize other stations Recording Recording with TapeDubbing from video components onto Video Dubbing the audio and video signals separately onto Video Other Functions Operating the sleep timerAdjusting the brightness of the fluorescent display Displaying the operation statusSystem Setup Setup menu flow Setting the System When selecting the Subwoofer modeWhen selecting the Tone Setting the Input Press the Cursor UP/DOWN buttons to select the desired itemSetting the Speaker Setup When selecting the DigitalWhen selecting the Auto Surround When selecting the Auto Setup PreparationsWhen selecting the Configuration About the speaker sizeWhen selecting the Distance About the speaker distanceWhen selecting the Crossover About the crossover frequencySetting the CH Level Repeat the above steps 1 and 2 to adjust each channel levelPress the Cursor UP/DOWN buttons to select the Mode ~ Setting the Parameter When selecting the Night ModeWhen selecting the Dolby Plii Music Troubleshooting Guide Problem Possible Cause RemedySpecifications RD-6513

RD-6513 specifications

The Sherwood RD-6513 is a versatile and robust receiver that has garnered attention for its impressive array of features and technologies designed to enhance audio and home theater experiences. As a part of Sherwood's long-standing tradition of quality audio equipment, the RD-6513 stands out with its combination of performance, functionality, and affordability.

One of the main features of the Sherwood RD-6513 is its powerful amplification. With a rated output of up to 100 watts per channel, this receiver is capable of driving a wide range of speakers, making it suitable for various home entertainment setups. The unit supports a variety of speaker configurations, including 2-channel, 5.1 surround sound, and more, making it adaptable to different viewing preferences and room sizes.

Another notable characteristic of the RD-6513 is its extensive connectivity options. It is equipped with multiple HDMI inputs, component video outputs, and analog audio connections, providing users with the flexibility to connect a variety of devices, such as Blu-ray players, gaming consoles, and streaming devices. The HDMI capabilities allow for high-definition video and audio pass-through, ensuring that users can enjoy the best quality from their entertainment sources.

The Sherwood RD-6513 also features advanced audio processing technologies, including Dolby Digital and DTS surround sound decoding. These technologies enhance the audio experience by providing immersive soundscapes that are particularly beneficial for film and gaming enthusiasts. Additionally, the receiver supports a range of audio formats, making it compatible with high-resolution audio files and streaming services.

For user convenience, the RD-6513 offers an intuitive on-screen display and an easy-to-navigate menu system. The included remote control allows users to make adjustments from the comfort of their couch, further enhancing the overall user experience. This attention to usability is an essential characteristic of the Sherwood brand.

In conclusion, the Sherwood RD-6513 is a feature-rich receiver that brings together impressive amplification, extensive connectivity, advanced audio processing, and user-friendly controls. It serves as a solid foundation for a high-quality home theater system, making it an appealing choice for audiophiles and casual listeners alike. With its blend of performance and technology, the RD-6513 remains a competitive option in the ever-evolving landscape of audio receivers.
Top Page Image Contents