Sherwood RD-6513 manual Troubleshooting Guide, Problem Possible Cause Remedy

Page 42

RD-6513(A) 2008.8.21 12:20 PM 페이지 43

Troubleshooting Guide

If a fault occurs, run through the table below before taking your receiver for repair.

If the fault persists, attempt to solve it by switching the receiver off and on again. If this fails to resolve the situation, consult your dealer. Under no circumstances should you attempt to repair the receiver yourself. This could void the warranty.

PROBLEM

POSSIBLE CAUSE

REMEDY

 

 

 

No power

• The AC input cord is disconnected.

• Connect the cord securely.

 

• Poor connection at AC wall outlet or the

• Check the outlet using a lamp or another

 

outlet is inactive.

appliance.

 

 

 

No sound

• The speaker cords are disconnected.

• Check the speaker connections.

 

• The master volume is adjusted too low.

• Adjust the master volume.

 

• The MUTE button on the remote control is

• Press the MUTE button to cancel the

 

pressed to ON.

muting effect.

 

• Speakers are not switched on.

• Press the SPEAKER button to ON.

 

• Incorrect selection of the input source.

• Select the desired input source correctly.

 

• Incorrect connections between the

• Make connections correctly.

 

components.

 

 

 

 

No sound from the surround

• Surround mode is switched off(stereo

• Select a surround mode.

speakers

mode).

 

 

• Master volume and surround level are too

• Adjust master volume and surround level.

 

low.

 

 

• A monaural source is used.

• Select a stereo or surround source.

 

• Surround speaker setting is “N”.

• Select the desired surround speaker

 

 

setting.

 

 

 

No sound from the center

• Surround mode is switched off(stereo

• Select the desired surround.

speaker

mode).

 

 

• Center speaker setting is “N”.

• Select the desired center speaker setting.

 

• Master volume and center level are too low.

• Adjust master volume and center level.

 

 

 

Stations cannot be received

• No antenna is connected.

• Connect an antenna.

 

• The desired station frequency is not tuned

• Tune in the desired station frequency.

 

in.

 

 

• The antenna is in wrong position.

• Move the antenna and retry tuning.

 

 

 

Preset stations cannot be

• An incorrect station frequency has been

• Memorize the correct station frequency.

received

memorized.

 

 

• The memorized stations are cleared.

• Memorize the stations again.

 

 

 

Poor FM reception

• No antenna is connected.

• Connect an antenna.

 

• The antenna is not positioned for the best

• Change the position of the antenna.

 

reception.

 

 

 

 

Continuous hissing noise

• Weak signals.

• Change the position of the antenna.

during FM reception,

 

• Install an outdoor FM antenna.

especially when a stereo

 

 

broadcast is received.

 

 

 

 

 

Continuous or intermittent

• Noise is caused by motors, fluorescent

• Keep the receiver away from noise

hissing noise during AM

lamps or lightning, etc.

sources.

reception, especially at night.

 

• Install an outdoor AM antenna.

 

 

 

Remote control unit does not

• Batteries are not loaded or exhausted.

• Replace the batteries.

operate.

• The remote sensor is obstructed.

• Remove the obstacle.

 

 

 

ENGLISH

43

Page 41 Page 43
Image 42
Page 41 Page 43
Contents RD-6513 Important Safety Instructions Introduction 120Contents Connecting Antennas System ConnectionsConnecting Video Components Hdmi High Definition Multimedia Interface connectionConnecting Audio Components Connecting Subwoofer PRE OUT Surround left and right speakers Speaker placementFront left and right speakers and center speaker SubwooferSetup MIC Jack Front Panel ControlsSetup MIC Jack Remote Controls Remote Control Operation Range Loading BatteriesOperations Listening to a Program SourceBefore operation Select the digital or the analog input connected as desired Adjust the overall volumeTo listen with the headphones Operate the selected component for playbackAdjusting the tone bass and treble Enter the tone modeDTS 96/24 Surround SoundSurround modes DTS Digital Surround Dolby Digital2CH downmix mode When CD or Video 1 ~ 2 is selected as an input sourceTo cancel the surround mode for stereo playback Enjoying Surround SoundRepeat the above steps 2 and 3 to adjust other parameters When adjusting the sound parametersWhen selecting the DRCDynamic Range Compression Night mode Press the Sound Parameter buttonAdjusting each channel level with test tone Enter the test tone modeCancel the test tone function Repeat the above steps 2 and 3 to adjust each channel level Adjusting the current channel levelAdjust the level of the selected channel as desired Press the Channel Level buttonConfirm your selection Memorizing the adjusted channel levelsSelect the desired one of REF 1 and REF Recalling the memorized channel levelsAuto presetting Auto tuningManual tuning Listening to Radio BroadcastsManual presetting Tuning to preset stationsRepeat the above steps1 to 3 to memorize other stations Recording Recording with TapeDubbing from video components onto Video Dubbing the audio and video signals separately onto Video Other Functions Operating the sleep timerAdjusting the brightness of the fluorescent display Displaying the operation statusSystem Setup Setup menu flow Setting the System When selecting the Subwoofer modeWhen selecting the Tone Setting the Input Press the Cursor UP/DOWN buttons to select the desired itemSetting the Speaker Setup When selecting the DigitalWhen selecting the Auto Surround When selecting the Auto Setup PreparationsWhen selecting the Configuration About the speaker sizeWhen selecting the Distance About the speaker distanceWhen selecting the Crossover About the crossover frequencySetting the CH Level Repeat the above steps 1 and 2 to adjust each channel levelPress the Cursor UP/DOWN buttons to select the Mode ~ Setting the Parameter When selecting the Night ModeWhen selecting the Dolby Plii Music Troubleshooting Guide Problem Possible Cause RemedySpecifications RD-6513

RD-6513 specifications

The Sherwood RD-6513 is a versatile and robust receiver that has garnered attention for its impressive array of features and technologies designed to enhance audio and home theater experiences. As a part of Sherwood's long-standing tradition of quality audio equipment, the RD-6513 stands out with its combination of performance, functionality, and affordability.

One of the main features of the Sherwood RD-6513 is its powerful amplification. With a rated output of up to 100 watts per channel, this receiver is capable of driving a wide range of speakers, making it suitable for various home entertainment setups. The unit supports a variety of speaker configurations, including 2-channel, 5.1 surround sound, and more, making it adaptable to different viewing preferences and room sizes.

Another notable characteristic of the RD-6513 is its extensive connectivity options. It is equipped with multiple HDMI inputs, component video outputs, and analog audio connections, providing users with the flexibility to connect a variety of devices, such as Blu-ray players, gaming consoles, and streaming devices. The HDMI capabilities allow for high-definition video and audio pass-through, ensuring that users can enjoy the best quality from their entertainment sources.

The Sherwood RD-6513 also features advanced audio processing technologies, including Dolby Digital and DTS surround sound decoding. These technologies enhance the audio experience by providing immersive soundscapes that are particularly beneficial for film and gaming enthusiasts. Additionally, the receiver supports a range of audio formats, making it compatible with high-resolution audio files and streaming services.

For user convenience, the RD-6513 offers an intuitive on-screen display and an easy-to-navigate menu system. The included remote control allows users to make adjustments from the comfort of their couch, further enhancing the overall user experience. This attention to usability is an essential characteristic of the Sherwood brand.

In conclusion, the Sherwood RD-6513 is a feature-rich receiver that brings together impressive amplification, extensive connectivity, advanced audio processing, and user-friendly controls. It serves as a solid foundation for a high-quality home theater system, making it an appealing choice for audiophiles and casual listeners alike. With its blend of performance and technology, the RD-6513 remains a competitive option in the ever-evolving landscape of audio receivers.
Top Page Image Contents