Sherwood RD-6513 manual When adjusting the sound parameters, Press the Sound Parameter button

Page 19

RD-6513(A) 2008.8.21 12:19 PM 페이지 20

ENGLISH

When adjusting the sound parameters

•While playing digital signals from Dolby Digital or DTS program source or listening in Dolby Pro Logic II Music mode, you can adjust their parameters for optimum surround effect.

1. Press the SOUND PARAMETER button.

• Then "DRC : ~ " (or "PANO : ~ ") is displayed for several seconds.

• If the parameter mode disappears, press this button again.

2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired parameter.

• Each time these buttons are pressed, the parameter mode changes as follows:

→ "DRC" ↔ "PANO" ↔ "C.WIDTH" ↔ "DIMEN" ←

(Dynamic Range Compression) (Panorama mode) (Center width control)

(Dimension control)

• "DRC" can be selected only while playing digital signals from Dolby Digital or DTS source.

• "PANO", "C.WIDTH" and "DIMEN" can be selected only while listening in Dolby Pro Logic II Music mode.

3. Press the CURSOR LEFT(◀)/ RIGHT(▶) buttons to adjust the selected parameter as desired.

When selecting the "DRC(Dynamic Range Compression:

Night mode)"

This function compresses the dynamic range of previously specified parts of Dolby Digital or DTS sound track (with extremely high volume) to minimize the difference in volume between the specified and non- specified parts. This makes it easy to hear all of the sound track when watching movies at night at low levels. The night mode can be set to OFF or ON (default value : OFF).

Note : In some Dolby Digital or DTS softwares, the night mode may not be valid.

When selecting the "PANO (Panorama)" mode

This mode extends the front stereo image to include the surround speakers for an exciting "wraparound" effect with side wall imaging. Select "OFF" or "ON"(default value: OFF).

When selecting the "C. WIDTH (Center width)" control

This adjusts the center image so it may be heard only from the center speaker, only from the left/right speakers as a phantom image, or from all three front speakers to varying degrees.

The control can be set in 8 steps from 0 to 7(default value : 3).

When selecting the "DIMEN (Dimension)" control

This gradually adjusts the soundfield either towards the front or towards the rear. The control can be set in 7 steps from -3 to +3 (default value : 0).

4. Repeat the above steps 2 and 3 to adjust other parameters.

20

Page 18 Page 20
Image 19
Page 18 Page 20
Contents RD-6513 Important Safety Instructions 120 IntroductionContents System Connections Connecting AntennasHdmi High Definition Multimedia Interface connection Connecting Video ComponentsConnecting Audio Components Connecting Subwoofer PRE OUT Subwoofer Speaker placementFront left and right speakers and center speaker Surround left and right speakersFront Panel Controls Setup MIC JackSetup MIC Jack Remote Controls Loading Batteries Remote Control Operation RangeListening to a Program Source OperationsBefore operation Operate the selected component for playback Adjust the overall volumeTo listen with the headphones Select the digital or the analog input connected as desiredEnter the tone mode Adjusting the tone bass and trebleDolby Digital Surround SoundSurround modes DTS Digital Surround DTS 96/24Enjoying Surround Sound When CD or Video 1 ~ 2 is selected as an input sourceTo cancel the surround mode for stereo playback 2CH downmix modePress the Sound Parameter button When adjusting the sound parametersWhen selecting the DRCDynamic Range Compression Night mode Repeat the above steps 2 and 3 to adjust other parametersEnter the test tone mode Adjusting each channel level with test toneCancel the test tone function Press the Channel Level button Adjusting the current channel levelAdjust the level of the selected channel as desired Repeat the above steps 2 and 3 to adjust each channel levelRecalling the memorized channel levels Memorizing the adjusted channel levelsSelect the desired one of REF 1 and REF Confirm your selectionListening to Radio Broadcasts Auto tuningManual tuning Auto presettingTuning to preset stations Manual presettingRepeat the above steps1 to 3 to memorize other stations Recording with Tape RecordingDubbing from video components onto Video Dubbing the audio and video signals separately onto Video Displaying the operation status Operating the sleep timerAdjusting the brightness of the fluorescent display Other FunctionsSystem Setup Setup menu flow When selecting the Subwoofer mode Setting the SystemWhen selecting the Tone Press the Cursor UP/DOWN buttons to select the desired item Setting the InputWhen selecting the Digital Setting the Speaker SetupWhen selecting the Auto Surround Preparations When selecting the Auto SetupAbout the speaker size When selecting the ConfigurationAbout the speaker distance When selecting the DistanceAbout the crossover frequency When selecting the CrossoverRepeat the above steps 1 and 2 to adjust each channel level Setting the CH LevelPress the Cursor UP/DOWN buttons to select the Mode ~ When selecting the Night Mode Setting the ParameterWhen selecting the Dolby Plii Music Problem Possible Cause Remedy Troubleshooting GuideSpecifications RD-6513

RD-6513 specifications

The Sherwood RD-6513 is a versatile and robust receiver that has garnered attention for its impressive array of features and technologies designed to enhance audio and home theater experiences. As a part of Sherwood's long-standing tradition of quality audio equipment, the RD-6513 stands out with its combination of performance, functionality, and affordability.

One of the main features of the Sherwood RD-6513 is its powerful amplification. With a rated output of up to 100 watts per channel, this receiver is capable of driving a wide range of speakers, making it suitable for various home entertainment setups. The unit supports a variety of speaker configurations, including 2-channel, 5.1 surround sound, and more, making it adaptable to different viewing preferences and room sizes.

Another notable characteristic of the RD-6513 is its extensive connectivity options. It is equipped with multiple HDMI inputs, component video outputs, and analog audio connections, providing users with the flexibility to connect a variety of devices, such as Blu-ray players, gaming consoles, and streaming devices. The HDMI capabilities allow for high-definition video and audio pass-through, ensuring that users can enjoy the best quality from their entertainment sources.

The Sherwood RD-6513 also features advanced audio processing technologies, including Dolby Digital and DTS surround sound decoding. These technologies enhance the audio experience by providing immersive soundscapes that are particularly beneficial for film and gaming enthusiasts. Additionally, the receiver supports a range of audio formats, making it compatible with high-resolution audio files and streaming services.

For user convenience, the RD-6513 offers an intuitive on-screen display and an easy-to-navigate menu system. The included remote control allows users to make adjustments from the comfort of their couch, further enhancing the overall user experience. This attention to usability is an essential characteristic of the Sherwood brand.

In conclusion, the Sherwood RD-6513 is a feature-rich receiver that brings together impressive amplification, extensive connectivity, advanced audio processing, and user-friendly controls. It serves as a solid foundation for a high-quality home theater system, making it an appealing choice for audiophiles and casual listeners alike. With its blend of performance and technology, the RD-6513 remains a competitive option in the ever-evolving landscape of audio receivers.
Top Page Image Contents