Sherwood RD-6513 manual Setting the Speaker Setup, When selecting the Digital

Page 33

RD-6513(A) 2008.8.21 12:20 PM 페이지 34

ENGLISH

When selecting the DIGITAL IN

•You should assign the connected DIGITAL INs to the desired of CD and VIDEO 1 ~ VIDEO 2. (For details, refer to "CONNECTING DIGITAL INs" on page 9.)

•You can select the desired of OPT (optical), COX 1(coaxial 1), COX 2(coaxial 2) and ANL (analog).

Note :

•In such a case that a DIGITAL IN is assigned to two input sources or more, when these input sources are selected, the digital audio signals can be heard from the same DIGITAL IN.

When selecting the AUTO SURROUND

• Depending on how to select a surround mode, you can select the auto surround mode or the manual surround mode.

OFF

: You can select the desired of different surround modes selectable for the signal being input with

(Manual surround mode)

using the MULTI CONTROL knob or the SURROUND MODE UP/DOWN (>/<) buttons.

↕

(For details, refer to "ENJOYING SURROUND SOUND" on page 19.)

ON

: The optimum surround mode will be automatically selected depending on the signal format being

(Auto surround mode)

input.

Notes :

•When the input source other than CD and VIDEO 1 ~ 2 is selected, you cannot select the auto surround mode and can select the surround mode as desired(the manual surround mode).

•When the auto surround mode is selected, the surround modes other than the optimum surround mode cannot be selected.

SETTING THE SPEAKER SETUP

•After you have installed this receiver and connected all the components, you should adjust the speaker settings for the optimum sound acoustics according to your environment and speaker layout.

•Even when you change speakers, speaker positions, or the layout of your listening environment, you should adjust the speaker settings, too.

•When performing the AUTO SETUP precedure, you need not perform the CONFIGURATION, DISTANCE and CH LEVEL setup procedures.

•AUTO SET (AUTO SETUP) : To set the speaker setup and channel level setup automatically.

•CONFIG (CONFIGURATION) : To select the sizes of the speakers that are connected.

•DISTANCE: To enter the distance between the listening position and each speaker to set the delay time automatically for optimum surround playback.

•X-OVER (CROSSOVER) : To select the desired crossover frequency.

•RETURN : To return to the previous menu.

34

Page 32 Page 34
Image 33
Page 32 Page 34
Contents RD-6513 Important Safety Instructions 120 IntroductionContents System Connections Connecting AntennasHdmi High Definition Multimedia Interface connection Connecting Video ComponentsConnecting Audio Components Connecting Subwoofer PRE OUT Front left and right speakers and center speaker Speaker placementSurround left and right speakers SubwooferFront Panel Controls Setup MIC JackSetup MIC Jack Remote Controls Loading Batteries Remote Control Operation RangeOperations Listening to a Program SourceBefore operation To listen with the headphones Adjust the overall volumeSelect the digital or the analog input connected as desired Operate the selected component for playbackEnter the tone mode Adjusting the tone bass and trebleSurround modes DTS Digital Surround Surround SoundDTS 96/24 Dolby DigitalTo cancel the surround mode for stereo playback When CD or Video 1 ~ 2 is selected as an input source2CH downmix mode Enjoying Surround SoundWhen selecting the DRCDynamic Range Compression Night mode When adjusting the sound parametersRepeat the above steps 2 and 3 to adjust other parameters Press the Sound Parameter buttonAdjusting each channel level with test tone Enter the test tone modeCancel the test tone function Adjust the level of the selected channel as desired Adjusting the current channel levelRepeat the above steps 2 and 3 to adjust each channel level Press the Channel Level buttonSelect the desired one of REF 1 and REF Memorizing the adjusted channel levelsConfirm your selection Recalling the memorized channel levelsManual tuning Auto tuningAuto presetting Listening to Radio BroadcastsManual presetting Tuning to preset stationsRepeat the above steps1 to 3 to memorize other stations Recording Recording with TapeDubbing from video components onto Video Dubbing the audio and video signals separately onto Video Adjusting the brightness of the fluorescent display Operating the sleep timerOther Functions Displaying the operation statusSystem Setup Setup menu flow When selecting the Subwoofer mode Setting the SystemWhen selecting the Tone Press the Cursor UP/DOWN buttons to select the desired item Setting the InputSetting the Speaker Setup When selecting the DigitalWhen selecting the Auto Surround Preparations When selecting the Auto SetupAbout the speaker size When selecting the ConfigurationAbout the speaker distance When selecting the DistanceAbout the crossover frequency When selecting the CrossoverRepeat the above steps 1 and 2 to adjust each channel level Setting the CH LevelPress the Cursor UP/DOWN buttons to select the Mode ~ When selecting the Night Mode Setting the ParameterWhen selecting the Dolby Plii Music Problem Possible Cause Remedy Troubleshooting GuideSpecifications RD-6513

RD-6513 specifications

The Sherwood RD-6513 is a versatile and robust receiver that has garnered attention for its impressive array of features and technologies designed to enhance audio and home theater experiences. As a part of Sherwood's long-standing tradition of quality audio equipment, the RD-6513 stands out with its combination of performance, functionality, and affordability.

One of the main features of the Sherwood RD-6513 is its powerful amplification. With a rated output of up to 100 watts per channel, this receiver is capable of driving a wide range of speakers, making it suitable for various home entertainment setups. The unit supports a variety of speaker configurations, including 2-channel, 5.1 surround sound, and more, making it adaptable to different viewing preferences and room sizes.

Another notable characteristic of the RD-6513 is its extensive connectivity options. It is equipped with multiple HDMI inputs, component video outputs, and analog audio connections, providing users with the flexibility to connect a variety of devices, such as Blu-ray players, gaming consoles, and streaming devices. The HDMI capabilities allow for high-definition video and audio pass-through, ensuring that users can enjoy the best quality from their entertainment sources.

The Sherwood RD-6513 also features advanced audio processing technologies, including Dolby Digital and DTS surround sound decoding. These technologies enhance the audio experience by providing immersive soundscapes that are particularly beneficial for film and gaming enthusiasts. Additionally, the receiver supports a range of audio formats, making it compatible with high-resolution audio files and streaming services.

For user convenience, the RD-6513 offers an intuitive on-screen display and an easy-to-navigate menu system. The included remote control allows users to make adjustments from the comfort of their couch, further enhancing the overall user experience. This attention to usability is an essential characteristic of the Sherwood brand.

In conclusion, the Sherwood RD-6513 is a feature-rich receiver that brings together impressive amplification, extensive connectivity, advanced audio processing, and user-friendly controls. It serves as a solid foundation for a high-quality home theater system, making it an appealing choice for audiophiles and casual listeners alike. With its blend of performance and technology, the RD-6513 remains a competitive option in the ever-evolving landscape of audio receivers.
Top Page Image Contents