Sherwood R-771 manual Introduction, Read This Before Operating Your Unit, For Your Safety, English

Page 4
Introduction

Introduction

READ THIS BEFORE OPERATING YOUR UNIT

This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION

: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

This symbol is intended to alert the user to the presence

NOT REMOVE COVER (OR BACK). NO USER-

 

 

 

SERVICEABLE PARTS INSIDE. REFER SERVICING

of important operating and maintenance (servicing)

 

instructions in the literature accompanying the appliance.

 

TO QUALIFIED SERVICE PERSONNEL.

 

 

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

Caution regarding installation

Note : For heat dispersal, do not install this unit in a confined space such as a bookcase or smilar enclosure.

ENGLISH

Do not block ventilation openings or stack other equipment on the top.

Note to CATV System Installer :

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

FCC INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Caution : Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FOR YOUR SAFETY

U.S.A

CANADA

120 V

Units shipped to the U.S.A and CANADA are designed for operation on 120 V AC only. Safety precaution with use of a polarized AC plug.

However, some products may be supplied with a nonpolarized plug.

CAUTION : To prevent electric shock, match wide blade of plug to wide slot, fully insert.

ATTENTION : Pour éviter chocs électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu’ au fond.

CAUTION

Leave a space around the unit for sufficient ventilation.

Avoid installation in extremely high or cold locations, or in an area that is exposed to direct sunlight or heating equipment.

Keep the unit free from moisture, water, and dust.

Do not let foreign objects in the unit.

The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.

No naked flame sources, such as lighted candles, should be placed on the unit.

Please be care the environmental aspects of battery disposal.

The unit shall not be exposed to dripping or splashing for use.

No objects filled with liquids, such as vases, shall be placed on the unit.

Do not let insecticides, benzene, and thinner come in contact with the set.

Never disassemble or modify the unit in any way.

Notes on the AC power cord and the wall outlet.

The unit is not disconnected from the AC power source(mains) as long as it is connected to the wall outlet, even if the unit has been turned off.

When disconnecting the power cord from the wall outlet, always pull the plug, not the power cord.

Disconnect the plug from the wall outlet when not using the unit for long periods of time.

The wall outlet shall be installed near the unit and shall be easily accessible.

3

Image 4
Contents Page Page ENGLISH SAFETY INSTRUCTIONSFOR YOUR SAFETY IntroductionREAD THIS BEFORE OPERATING YOUR UNIT ENGLISHCONTENTS Universal Remote ControlsOSD Menu Settings Troubleshooting Guide SpecificationsSystem Connections 1. CONNECTING ANTENNAsENGLISH 2. CONNECTING VIDEO COMPONENTS ENGLISHENGLISH Continued3. CONNECTING AUDIO COMPONENTS 4. CONNECTING EXTERNAL INs5. CONNECTING DIGITAL INs and OUT ENGLISH6. CONNECTING SYSTEM CONTROL 8. CONNECTING SPEAKERS7. SUBWOOFER PREOUT connection Surround back speakersSpeaker placement Front left and right speakers and center speakerSurround left and right speakers Surround back left and right speakers10. CONNECTING ROOM 2 OUTs 9. CONNECTING DC TRIGGER OUTENGLISH 11. CONNECTING MULTI-ROOMSYSTEM KIT 12. CONNECTING PC FOR UPGRADES13. SWITCHED AC OUTLETs 14. AC INPUT CORDFLUORESCENT DISPLAY Front Panel ControlsENGLISH SETUP MIC JACK AUX IN JACKVIDEO 4 IN JACKS ENGLISHDigi link system remote controls Universal Remote ControlsENGLISH FUNCTION TABLE of the NUMBERED BUTTONS ENGLISHREMOTE CONTROL OPERATION RANGE OPERATING COMPONENTS WITH REMOTE CONTROLLOADING BATTERIES ENGLISHEntering a setup code USING FUNCTIONS OF REMOTE CONTROLENGLISH Using a punch-throughfunction ENGLISHOperating a macro function Programming a macro functionENGLISH Operations LISTENING TO A PROGRAM SOURCEBefore operation ENGLISHWhen CD, VIDEO 1~3 is selected as an input source Listening with headphonesMuting the sound ENGLISHSURROUND SOUND Surround modesDTS Digital Surround DTS - ES Extended SurroundDolby Pro Logic IIx surround Dolby Pro LogicDolby Headphone Dolby Pro Logic II surroundENJOYING SURROUND SOUND ENGLISHAdjusting each channel level with test tone To cancel the surround mode for stereo operationListening in a Dolby Headphone mode 2CH downmix modeAdjusting the current channel level ENGLISHRecalling the memorized channel levels Memorizing the adjusted channel levelsENGLISH Auto tuning Manual tuningLISTENING TO RADIO BROADCASTS ENGLISHPresetting radio stations Tuning to preset stationsScanning preset stations in sequence MEMORY BACKUP FUNCTIONDubbing the audio and video signals RECORDINGRecording with TAPE Dubbing from video components ontoDIGITAL AUDIO RECORDING WITH MD RECORDER ENGLISHOTHER FUNCTIONS Operating the sleep timerENGLISH Adjust the ROOM 2 volume ROOM 2 SOURCE PLAYBACKENGLISH OSD Menu Settings ENGLISHWhen selecting the SYSTEM SETUP When selecting the INPUT SETUPWhen selecting the SOUND PARAMETER When selecting the ROOM 2 SETUPSETTING THE SYSTEM SETUP When selecting the AMP ASSIGNWhen selecting the OUT ASSIGN ENGLISHWhen selecting the TONE CONTROL When selecting the SUBWOOFER MODEENGLISH When selecting the CINEMA EQ When selecting the MOMENTARY OSDWhen selecting the OSD POSITION ADJUST ENGLISHSETTING THE INPUT SETUP When selecting the items other than NAMEWhen selecting the DIGITAL AUDIO ENGLISHWhen selecting the VIDEO MODE When selecting the AUTO SURROUNDWhen selecting the REMASTER When selecting the AV SYNCWhen selecting the NAME ENGLISHWhen selecting the AUTO SETUP SETTING THE SPEAKER / ROOM EQ SETUPENGLISH ENGLISH 2 ENTER buttonPress the CURSOR UP /DOWN buttons to select the START, then press the ENTERWhen selecting the SPEAKER CONFIGURATION ENGLISHAbout the speaker size ENGLISHAbout the speaker distance When selecting the SPEAKER DISTANCEENGLISH About the crossover frequency When selecting the SPEAKER X-OVERENGLISH When selecting the ROOM EQ ENGLISHAdjusting the current channel level SETTING THE CH LEVEL SETUPENGLISH Memorizing the adjusted channel levels Recalling the memorized channel levelsENGLISH When selecting the NIGHT MODE SETTING THE SOUND PARAMETERENGLISH When selecting the DOLBY PLII MUSIC When selecting the PANORAMA modeWhen selecting the DIMENSION control ENGLISHWhen selecting the DOLBY HEADPHONE ENGLISHWhen selecting the DOLBY VIRTUAL ENGLISHSETTING THE ROOM 2 SETUP When selecting the ROOMWhen selecting the INPUT When selecting the VOLUMETroubleshooting Guide PROBLEMENGLISH POSSIBLE CAUSESpecifications ENGLISHSetup Code Table ENGLISHENGLISH ENGLISH HeadquarterENGLISH AUX-TAPE/MD AUX-LDAUX-TAPE AUX-AMPAUX-ACCESSARY AUX-HOMEAUTOMATIONAUX-DBS ENGLISH