Sherwood R-771 manual When CD, VIDEO 1~3 is selected as an input source, Muting the sound, English

ENGLISH

When CD, VIDEO 1~3 is selected as an input source

4	Select the digital or analog input
	connected as desired.	• Each time this button is pressed, the
		corresponding input is selected as follows ;
		A(nalog) o(ptical) 1 o(ptical) 2
		c(oaxial) 2	c(oaxial) 1

Notes :

•WhenTUNER, AUX, TAPE, EXTERNAL IN or VIDEO 4 is selected as an input source, the analog input is selected automatically.

•When the selected digital input is not connected, the "DIGITAL" indicator filckers and the analog input is automatically selected.

•The selected digital or analog input is automatically assigned to the corresponding input source on the INPUT SETUP menu. (For details, refer to "SETTING THE INPUT SETUP" on page 40.)

•The sound from the component connected to the selected digital input can be heard regardless of the selected input source.

	Operate the selected component for	Adjust the (overall) volume.
5		6
	playback.

• When playing back the program sources with surround sound, refer to "ENJOYING SURROUND SOUND" on page 25.

Muting the sound Listening with headphones

	• Ensure that the SPEAKER button is set to off.
	• Depending on the signal format which is being
	input, you can listen in different Dolby
• "MUTE" will flicker.	Headphone modes, stereo mode, etc. (For
	details, refer to "Listening in a Dolby Headphone
• To resume the previous sound level, press it again.
	mode" on page 26).
	• When the EXTERNAL IN is selected as an input
	source, only front left and front right channel
	signals can be reproduced through the
	headphones.

22