ROOM 2 SOURCE PLAYBACK, English | Sherwood R-771 manual

ENGLISH

ROOM 2 SOURCE PLAYBACK

•This function allows enjoying one source in the main room and playing another in a different room at the same time.

•When you connect the multi-room system kit to the IR IN jack of this receiver, you can control this receiver with the remote control unit in a different room. (For details, refer to "CONNECTING MULTI-ROOM SYSTEM KIT" on page 12.)

Notes:

•The analog signals from the EXTERNAL INs and the digital signals cannot be output to the different room, meaning no playback in a different room.

•You cannot play the ROOM 2 source in any surround mode.

When using the buttons on the remote control unit.

Press the ROOM 2 button.

• R2 ~ is displayed on the front panel for several seconds.

•Each time this button is pressed,

the ROOM 2 mode changes as follows : OFF : To turn off the ROOM 2

function. ("R2" goes off.) ON : To turn it on. ("R2" lights up.)

Note:

•When the ROOM 2 mode is set to OFF, the ROOM 2 input and the ROOM 2 volume cannot be selected.

Select the desired

2 input as a ROOM 2 source.

• Each time this button is pressed, the ROOM 2 input can be selected among TUNER, CD, AUX, TAPE, VIDEO 1 ~ VIDEO 4.

Adjust the ROOM 2 volume.

• You can adjust the volume on the power amplifier assigned to ROOM 2 when the SURROUND BACK/ ROOM 2 speaker terminals are connected to the speakers in a different room. (For details, refer to "When selecting the AMP ASSIGN" on page 37.)

Start play on the component related to the

4 ROOM 2 source.

When using the buttons on the front panel.

Press the ROOM 2 button to enter the

1 ROOM 2 mode.

•R2 ~ is displayed on the front panel for several seconds.

•When the ROOM 2 setting mode disappears, press the ROOM 2 button again.

2	Select the desired mode while displaying
	the ROOM 2 setting mode.

CONTROL

•Each time these buttons are pressed, the mode changes as follows :

R2 ~ (ROOM 2 mode) : To turn on or

off the ROOM 2 function.

Input display (ROOM 2 input) : To select the desired ROOM 2 source.

R2 V ~ (ROOM 2 volume) : To adjust the volume on the power amplifier assigned to ROOM 2.

Note:: When the ROOM 2 mode is set to OFF, the ROOM 2 input and the ROOM 2 volume cannot be selected.

Set the selected mode as desired.

When selecting the ROOM 2 mode.

OFF : To turn off the ROOM 2

function. ("R2" goes off.)

ON : To turn it on. ("R2" lights up.)

When selecting the ROOM 2 input.

•You can select the desired among TUNER, CD, AUX, TAPE, VIDEO 1 ~ VIDEO 4 as a ROOM 2 source. When selecting the ROOM 2 volume.

•You can adjust the volume on the power amplifier assigned to ROOM 2 when the SURROUND BACK/ ROOM 2 speaker terminals are connected to the speakers in a different room. (For details, refer to "When selecting the AMP ASSIGN" on page 37.)

4	Start play on the component related to the
	ROOM 2 source.

Notes :

•Even when this receiver enters the standby mode, in such a case that "R2" lights up still and the POWER ON/STANDBY button lights up in blue as it does in the operating mode, meaning only the ROOM 2 circuitry operates, the ROOM 2 source can be played independently.

•When the ROOM 2 function is operating in the standby mode, only the remote control unit is available.

•When you do not use the ROOM 2 function, turn off the ROOM 2 function to save electricity.