ClearSounds CSC50-ER manual Using the Outgoing Speech Volume, Using The Last Number Redial

Using the Outgoing Speech Volume

You can adjust the sending volume (outgoing volume up to 12 dB of gain) by using the Speech Volume Control located on the right side of your CSC50-ER phone. If your voice is faint or weak, adjust the volume to “HI”. You can also decrease the volume as well. There are three levels available “LO, NORMAL & HI” (See diagram #28).

DIAGRAM #28 - Outgoing Speech Volume Switch

Tip: If you are using the boost feature along with the handset boost, we suggest you set the SPCH VOL switch to HI. Any time you utilize the maximum amplification for listening, it is normal for your outgoing speech volume to decrease. Therefore, it may be necessary to turn the Speech Volume to HI.

Using The Last Number Redial

The REDIAL button is used to quickly redial the last number you dialed.

1.Lift the handset, listen for the dial tone

2.Press REDIAL button. The phone will redial up to 31 digits automatically.

NOTE: If you would like to dial from one of the last 30 numbers dialed (See page #34 for instructions).

Using The Flash Button

The FLASH button is used to disconnect a call and re-establish dial tone or to switch over to another caller if you use custom calling services such as Call Waiting or Three Way Calling. Please contact your local telephone company for information on these services.

1. During a call press the FLASH button to access flash feature.

Using The Mute Button

The MUTE button allows the user to conduct a private conversation that you do not want the person on the other end to hear.

1.Press and hold the MUTE button. You will still be able to hear the caller but they cannot hear you during the mute operation.

2.To resume normal conversation, release the MUTE button.

CSC50-ER CALLER ID OPERATION

NOTE: In order to utilize the Caller ID features, you must subscribe to Caller ID service through your local phone company. There are fees for Caller ID services, and it may not be

25