ClearSounds CSC50-ER manual Maintenance and Care, Change the Remote Band Battery

Maintenance and Care

The CSC50-ER Emergency Connect Telephone has been designed to give you years of dependable service with a minimum of care. To ensure the utmost in performance, follow these guidelines in caring for your phone:

1.Avoid dropping or knocking the unit.

2.Dust the unit regularly. Unplug your phone and wipe with a soft slightly damp cloth to remove any dirt from it. To avoid damage, NEVER use an abrasive or strong solvent to clean any part of the phone.

3.Keep the phone out of direct sunlight.

4.Avoid placing the phone in extremely humid conditions.

5.Avoid electric shock by keeping the phone away from water (i.e. bathroom, kitchen sink, etc.)

Change the Remote Band Battery

To replace the battery, lift the remote band, unscrew the three small screws located on the base and lift the cover to access the battery. The Remote Band operates on one alkaline “23A” 12V size cigarette lighter battery. Replace the battery with correct polarity. Replace the cover (See diagram #36).

	-	BAT
Screws		+

X

Front Bottom Battery location

DIAGRAM #36– Battery Installation

NOTE: Be sure to test your Remote Band (See page 18) after changing the battery to assure that your system is operating properly.

37