ClearSounds CSC50-ER manual Programming the Ringer & Auxiliary Alert, Ringer Volume, Ring Style

PROGRAMMING THE RINGER & AUXILIARY ALERT

Ringer Volume:

You can adjust the ringer volume of your CSC50-ER as high as 95+ dB. The ringer volume adjustment is located on the right side of the telephone. The settings are OFF, LO, HI, (See diagram #11). Your phone comes with the ringer switched to HI. In additional to volume, you can adjust the tone or melody of the ring.

: Off,

: Low,

: Hi

DIAGRAM #11 – Ringer Volume Switch

Ring Style:

Your CSC50-ER Phone allows you to choose from four different ring tones. You can choose a new one by changing the settings as follows:

In the hook position
1.	Press the MUTE button to access the special features (See diagram #12).
2.	Using the	or	arrow buttons (below the Caller ID Display), highlight <<SET
	PHONE>>.
3.	Press the OK (green) button.
4.	Using the	or	arrow buttons, scroll to select <<SET RING>>.
5.	Press OK button.
6.	There are four (4) ring tones available. To hear each ring, use the			or
	arrow button to highlight any one of the four and then press the OK button. Do this
	with each one to find the best fit for you.

7.To save the ring tone, highlight the ring tone you want, and then press the C button three (3) times until you are back to the time and date display. Or after your selec- tion, do nothing for 20 seconds and the ring type will automatically be saved for the next incoming call.

DIAGRAM #12 – Set The Ringer

Strobe & Optional Bed Shaker Ring Signaling:

Your ClearSounds™ CSC50-ER Emergency Connect Telephone incorporates several options to alert you that the phone is ringing. The loud, adjustable Ringer as well as the bright Strobe and optional Bed Shaker or any combination of these allow you to customize the phone to fit your needs.

13