Memorizing the adjusted channel levels
•You can memorize the adjusted channel levels into preset memory("REF 1", "REF 2") and recall the memorized whenever you want.
1 | After performing the steps | ~ in "Adjusting the current channel level" procedure on page |
50, press the CURSOR UP( | )/DOWN( ) buttons to select the MODE(memory mode), then | |
press the ENTER button. |
|
• The "REF 1" indication flickers.
Press the CURSOR LEFT( )/RIGHT( ) buttons to select the desired preset memory,
2 then press the ENTER button.
• Each time the CURSOR LEFT( ) or RIGHT( ) button is pressed, "REF 1" or "REF 2" is selected.
• The adjusted channel levels have now been memorized into the selected memory.
Recalling the memorized channel levels
Press the CURSOR UP( )/DOWN( ) buttons to select the MODE(memory mode).
1
• "CALIBRATE" may be displayed instead of "REF 1" or "REF 2".
Press the CURSOR LEFT( )/ RIGHT( ) buttons to select the desired one of REF 1 and
2 REF 2.
• Then the channel levels memorized into the selected preset memory are recalled.
ENGLISH
51