Sherwood R-771 manual When selecting the NAME, English

ENGLISH

When selecting the NAME

•You can give names to the input sources other than tuner.

•Up to 8 characters can be entered for each name.

Press the CURSOR UP(	)/DOWN( ) buttons to select the desired input source, then
1 press the ENTER button.	Example) When selecting the VIDEO 1

Press the CURSOR UP( )/DOWN( ) buttons to select the NAME, then press the ENTER button.

2

		• The first digit flickers.
3	Press the CURSOR LEFT( )/ RIGHT( )	4	Press the CURSOR UP( )/DOWN( )
	buttons to select the desired digit.		buttons to enter the desired character on
			the flickering digit.

• Then the selected digit will flicker.	• You can enter the desired among blank, A ~ Z and
	0 ~ 9.

5	Repeat the above steps and to enter the desired characters on the rest of the digits.
6	Confirm your entry.
	• The name is stored in the memory.
	To resume its factory input source name.
	• Make a blank on each digit and press the ENTER
	button.

42