8 Anti-Tip Bracket Installation
An
WARNING
■Range must be secured by
■See instructions to install (supplied with bracket).
■Unless properly installed, the range could be tipped by stepping or sitting on the door. Injury might result from spilled hot liquids or from the range itself.
Bracket
Wall plate
Screw must enter wood or metal
Typical installation of
9 Leveling the Range
The range must be level. Leveling feet are located at each corner of the base of the range. Remove the storage drawer or kick panel (depending on your model) and using channel locks, rotate the leveling feet in and out as required to level the range. (For instructions on how to remove and replace the storage drawer or the kick panel, see the Care and cleaning of the range section.)
On some models, there are plastic covers which may be removed for easy adjustment (just squeeze and pull).
One of the rear leveling feet will engage the
Check the range for proper installation into the
10 Final Check
Be sure all range controls are in the OFF position before leaving the range.
Safety Information Operating Instructions Installation Instructions Troubleshooting Tips Customer Service
35