GE JGAS02 owner manual Cleaning Operating Instructions Safety, Burners, Control Panel and Knobs

Page 18

Instructions

Care and cleaning of the range.

and Cleaning Operating Instructions Safety

Clean these

holes

thoroughly on each burner.

Burners

The holes in the surface burners of your range must be kept clean at all times for proper ignition and an even, unhampered flame.

You should clean the surface burners routinely, especially after bad spillovers,

which could clog these holes. Wipe off the surface burners. If heavy spillover occurs, remove the surface burners from the range. The burners lift out for cleaning. Lift up the cooktop and then lift out the surface burners.

NOTE: A screw holds each of the burners in place to keep them from wobbling around during shipment. Remove and discard the shipping screw.

To remove burned-on food, soak the surface burner in a solution of mild liquid detergent and hot water. Soak the surface burner for 20 to 30 minutes. For more stubborn stains, use a cleanser like Soft Scrub® brand or Bon Ami® brand. Rinse well to remove any traces of the cleanser that might clog the surface burner openings. Do not use steel wool because it will clog the surface burner openings and scratch the surface burners. If the holes become clogged, clean them with a small pin or sewing needle.

Before putting the surface burner back, shake out excess water and then dry it thoroughly by setting it in a warm oven for 30 minutes. Then place it back in the range, making sure it is properly seated and level.

Installation Instructions Care

Control Panel and Knobs

It’s a good idea to wipe the control panel after each use of the oven. Clean with mild soap and water or vinegar and water, rinse with clean water and polish dry with a soft cloth.

Do not use abrasive cleansers, strong liquid cleaners, plastic scouring pads or oven cleaners on the control panel—they will damage the finish. A 50/50 solution of vinegar and hot water works well.

The control knobs may be removed for easier cleaning.

To remove the knob, pull it straight off the stem. Wash the knobs in soap and water or a vinegar and hot water solution but do not soak.

Troubleshooting Tips

Oven Shelves and Broiler Rack

The shelves and broiler rack can be cleaned by hand using soap and water or with an abrasive cleaner. After cleaning, rinse the shelves and broiler rack with clean water and dry.

To remove heavy, burned-on soil, you may use scouring pads. After scrubbing, wash with soapy water, rinse and dry.

Consumer Support

Metal Parts

Do not use steel wool, abrasives, ammonia or commercial oven cleaners.

To safely clean surfaces: wash, rinse and then dry with a soft cloth.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Ran24 Gas ges 183D9542P005 Pub NumberWhat to do if YOU Smell GAS Safety Instructions Operating Instructions Care Ge.comInstallation of the range section Cook Meat and Poultry THOROUGHLY… Surface Burners Installation Instructions Operating InstructionsInstructions Using the gas surface burnersInstallation Instructions Care and Cleaning Surface Lighting Instructions for Electric Ignition ModelsHow to Select Flame Size Instructions Operating Top of Range CookwareUsing the oven Oven Shelf Positions Oven VentsType of margarine will affect baking performance Using the oven for baking Pies Cookies SafetyCare and Cleaning Don’t Peek CakesSafety Instructions Using the oven for roastingAdjust the oven thermostat-Easy to do yourself How to Set the Oven For RoastingBroiler Compartment Using the oven for broilingSafety Instructions How to Set Your Oven for Broiling Use of Aluminum FoilBroiling Guide CommentsBurner Grates Care and cleaning of the rangeLift-Up Cooktop Tips Consumer SupportControl Panel and Knobs Cleaning Operating Instructions SafetyBurners Oven Shelves and Broiler RackRemovable Oven Bottom Cleaning the Oven BottomCleaning Installation Instructions Broiler Compartment To removeTo remove the door Instructions Safety Broiler Pan and GridLift-Off Oven Door Inside of doorDo not use a steel wool pad it will scratch the surface Porcelain Oven Interior SafetyPainted Surfaces 800.626.2002Commonwealth of Massachusetts Before YOU BeginPart Included For Your SafetyTools YOU will Need Materials YOU MAY NeedInstallation Safety Instructions Dimensions and Clearances ANTI-TIP Device LocationConnect the Range to GAS Provide Adequate GAS SupplyFlexible Connector Recommended GAS and Electric Supply LocationHookup Example Seal the Openings Light the PilotsIf the Range has Electric Ignition Adjust the Oven Burner AIR Shutter if NecessaryAdjust the Surface Burner Pilots if Necessary For Natural GasReplace Oven Parts If Adjustment is NecessaryQuality of Flames For LP GasInstall the ANTI-TIP Device Level the Range⁄ 8 ″ When ALL Hookups are Completed Mobile Home InstallationModel and Serial Number Location Before you call for service… Care and Cleaning Gas Range WarrantyWhat is Not Covered We Will ReplaceConsumer Support GE Appliances Website Schedule ServiceParts and Accessories Real Life Design Studio

JGAS02 specifications

The GE JGAS02 is an advanced gas turbine designed to meet the growing demand for efficient and reliable energy solutions. With a focus on performance and sustainability, the JGAS02 incorporates a series of cutting-edge technologies that enhance its operational capabilities while reducing its environmental footprint.

One of the standout features of the JGAS02 is its high efficiency rating. The turbine boasts an advanced airfoil design that optimizes airflow and enhances combustion efficiency. This results in reduced fuel consumption and lower emissions, making it an ideal choice for power generation in a world increasingly focused on clean energy solutions.

The JGAS02 utilizes a sophisticated control system that allows for precise monitoring and management of its operation. This system is equipped with predictive analytics, enabling operators to anticipate maintenance needs and minimize downtime. This not only increases the reliability of the turbine but also extends its operational lifespan, providing significant cost savings over time.

Another key characteristic of the JGAS02 is its versatility. It can operate with a variety of fuels, including natural gas, biogas, and even liquid fuels, allowing it to adapt to different market needs and regulatory environments. This flexibility makes it a popular choice for both industrial applications and power plants seeking to diversify their energy sources.

In terms of technology, the JGAS02 features state-of-the-art cooling systems that enhance turbine performance while protecting critical components from high temperatures. Proprietary materials and coatings are employed to ensure durability and longevity in demanding operating conditions.

Moreover, the JGAS02's modular design simplifies maintenance and upgrades, making it easier for operators to implement enhancements as technology evolves. This attention to future-proofing aligns with GE’s commitment to providing long-term value to its customers.

Overall, the GE JGAS02 represents a significant advancement in gas turbine technology. With its blend of high efficiency, operational reliability, and environmental sustainability, it is well-positioned to meet the challenges of modern energy production while supporting a transition to a cleaner energy future.
Top Page Image Contents