GE JGAS02 Instructions Safety Broiler Pan and Grid, Lift-Off Oven Door, To remove the door

Page 20

Instructions

Care and cleaning of the range.

Instructions Safety

Broiler Pan and Grid

After broiling, remove the broiler pan from the oven. Remove the grid from the pan. Carefully pour out grease from the pan into a proper container. Wash and rinse the broiler pan and grid in hot water with a soap-filled or plastic scouring pad.

If food has burned on, sprinkle the grid with detergent while hot and cover with wet paper towels or a dishcloth. Soaking the pan will remove burned on foods.

Do not store a soiled broiler pan and grid anywhere in the range.

Lift-Off Oven Door

Slot

Hinge lock

The oven door is removable, but it is heavy. You may need help removing and replacing the door.

To remove the door:

Open the door to the full open position.

TO CLEAN THE DOOR:

Inside of door:

■ Soap and water will normally do the

job. Heavy spattering or spillovers may

require cleaning with a mild abrasive

cleaner. Soapy, wet metal pads may also

be used. Do not allow food spills with a

Upper

 

hinge arm

Lower

 

hinge arm

Pull the hinge locks up over the hinge hooks on both sides. You may need to use a flat-blade screwdriver to lift hinge locks up.

Grasp the door firmly on each side, lift slightly and pull it straight out and away from the oven.

high sugar or acid content (such as

milk, tomatoes, sauerkraut, fruit juices

or pie filling) to remain on the surface.

They may cause a dull spot even

after cleaning.

■ If necessary, you may use an oven

cleaner. Follow package directions.

To replace the door:

Outside of door:

Consumer Support Troubleshooting Tips Installation Instructions Care and Cleaning Operating

The gasket is designed with a gap at the bottom to allow for proper air circulation.

Do not rub or clean the door gasket— it has an extremely low resistance to abrasion.

If you notice the gasket becoming worn, frayed or damaged in any way or if it has become displaced on the door, you should have it replaced.

Firmly grasp both sides of the door at the top.

Insert and seat the upper and lower hinge arms into the oven slots.

Push the hinge locks down from the hinge hooks.

Close the oven door and make sure it is working properly. If it is not working properly, remove and replace it following the above steps.

DO NOT ATTEMPT TO CLOSE THE DOOR UNTIL THIS STEP IS COMPLETE. THE HINGE OR DOOR COULD BE DAMAGED.

■Use soap and water to thoroughly clean the top, sides and front of the oven. Rinse well.

■Spillage of marinades, fruit juices, tomato sauces and basting materials containing acids may cause discoloration and should be wiped up immediately. When surface is cool, clean and rinse.

■Do not use oven cleaners, cleansing powders or harsh abrasives on the outside of the door.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Ran24 Gas ges 183D9542P005 Pub NumberWhat to do if YOU Smell GAS Safety Instructions Operating Instructions Care Ge.comInstallation of the range section Cook Meat and Poultry THOROUGHLY… Surface Burners Installation Instructions Operating InstructionsUsing the gas surface burners Installation Instructions Care and CleaningInstructions Surface Lighting Instructions for Electric Ignition ModelsHow to Select Flame Size Instructions Operating Top of Range CookwareUsing the oven Type of margarine will affect baking performance Oven Shelf PositionsOven Vents Using the oven for baking Cookies Safety Care and Cleaning Don’t PeekPies CakesUsing the oven for roasting Adjust the oven thermostat-Easy to do yourselfSafety Instructions How to Set the Oven For RoastingUsing the oven for broiling Safety Instructions How to Set Your Oven for BroilingBroiler Compartment Use of Aluminum FoilBroiling Guide CommentsCare and cleaning of the range Lift-Up CooktopBurner Grates Tips Consumer SupportCleaning Operating Instructions Safety BurnersControl Panel and Knobs Oven Shelves and Broiler RackCleaning the Oven Bottom Cleaning Installation Instructions Broiler CompartmentRemovable Oven Bottom To removeInstructions Safety Broiler Pan and Grid Lift-Off Oven DoorTo remove the door Inside of doorPorcelain Oven Interior Safety Painted SurfacesDo not use a steel wool pad it will scratch the surface 800.626.2002Commonwealth of Massachusetts Before YOU BeginFor Your Safety Tools YOU will NeedPart Included Materials YOU MAY NeedInstallation Safety Instructions Dimensions and Clearances ANTI-TIP Device LocationConnect the Range to GAS Provide Adequate GAS SupplyHookup Example Flexible ConnectorRecommended GAS and Electric Supply Location Seal the Openings Light the PilotsAdjust the Oven Burner AIR Shutter if Necessary Adjust the Surface Burner Pilots if NecessaryIf the Range has Electric Ignition For Natural GasIf Adjustment is Necessary Quality of FlamesReplace Oven Parts For LP Gas⁄ 8 ″ Install the ANTI-TIP DeviceLevel the Range Model and Serial Number Location When ALL Hookups are CompletedMobile Home Installation Before you call for service… Gas Range Warranty What is Not CoveredCare and Cleaning We Will ReplaceSchedule Service Parts and AccessoriesConsumer Support GE Appliances Website Real Life Design Studio

JGAS02 specifications

The GE JGAS02 is an advanced gas turbine designed to meet the growing demand for efficient and reliable energy solutions. With a focus on performance and sustainability, the JGAS02 incorporates a series of cutting-edge technologies that enhance its operational capabilities while reducing its environmental footprint.

One of the standout features of the JGAS02 is its high efficiency rating. The turbine boasts an advanced airfoil design that optimizes airflow and enhances combustion efficiency. This results in reduced fuel consumption and lower emissions, making it an ideal choice for power generation in a world increasingly focused on clean energy solutions.

The JGAS02 utilizes a sophisticated control system that allows for precise monitoring and management of its operation. This system is equipped with predictive analytics, enabling operators to anticipate maintenance needs and minimize downtime. This not only increases the reliability of the turbine but also extends its operational lifespan, providing significant cost savings over time.

Another key characteristic of the JGAS02 is its versatility. It can operate with a variety of fuels, including natural gas, biogas, and even liquid fuels, allowing it to adapt to different market needs and regulatory environments. This flexibility makes it a popular choice for both industrial applications and power plants seeking to diversify their energy sources.

In terms of technology, the JGAS02 features state-of-the-art cooling systems that enhance turbine performance while protecting critical components from high temperatures. Proprietary materials and coatings are employed to ensure durability and longevity in demanding operating conditions.

Moreover, the JGAS02's modular design simplifies maintenance and upgrades, making it easier for operators to implement enhancements as technology evolves. This attention to future-proofing aligns with GE’s commitment to providing long-term value to its customers.

Overall, the GE JGAS02 represents a significant advancement in gas turbine technology. With its blend of high efficiency, operational reliability, and environmental sustainability, it is well-positioned to meet the challenges of modern energy production while supporting a transition to a cleaner energy future.
Top Page Image Contents