GE JGAS02 owner manual What to do if YOU Smell GAS

Page 2

Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.

Tips Installation Instructions Care and Cleaning Operating Instructions

®

WARNING!

ANTI-TIP DEVICE

■ALL RANGES CAN TIP

■INJURY TO PERSONS COULD RESULT

■INSTALL ANTI-TIP DEVICES PACKED WITH RANGE

■SEE INSTALLATION INSTRUCTIONS

WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury

or death.

—Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

—WHAT TO DO IF YOU

SMELL GAS

■Do not try to light any appliance.

■Do not touch any electrical switch; do not use any phone in your building.

■Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

■If you cannot reach your gas supplier, call the fire department.

—Installation and service must be performed by a qualified installer, service agency or the gas supplier.

Consumer Support Troubleshooting

ANTI-TIP DEVICE

 

 

All ranges can tip and injury could result.

 

 

To prevent accidental tipping of the range, attach it to the wall by installing the Anti-Tip device

 

 

supplied.

 

 

 

 

If the Anti-Tip device supplied with the range does not fit this application, use the universal Anti-Tip

 

 

device WB2X7909.

 

 

To check if the device is installed and engaged properly, carefully tip the range forward. The Anti-Tip

 

 

device should engage and prevent the range from tipping over.

 

 

If you pull the range out from the wall for any reason, make sure the device is properly

 

 

engaged when you push the range back against the wall. If it is not, there is a possible risk of

 

 

the range tipping over and causing injury if you or a child stand, sit or lean on an open door.

2

Please refer to the Anti-Tip device information in this manual. Failure to take this precaution

could result in tipping of the range and injury.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Ran24 Gas ges 183D9542P005 Pub NumberWhat to do if YOU Smell GAS Safety Instructions Operating Instructions Care Ge.comInstallation of the range section Cook Meat and Poultry THOROUGHLY… Surface Burners Installation Instructions Operating InstructionsInstructions Using the gas surface burnersInstallation Instructions Care and Cleaning Surface Lighting Instructions for Electric Ignition ModelsHow to Select Flame Size Instructions Operating Top of Range CookwareUsing the oven Type of margarine will affect baking performance Oven Shelf PositionsOven Vents Using the oven for baking Pies Cookies SafetyCare and Cleaning Don’t Peek CakesSafety Instructions Using the oven for roastingAdjust the oven thermostat-Easy to do yourself How to Set the Oven For RoastingBroiler Compartment Using the oven for broilingSafety Instructions How to Set Your Oven for Broiling Use of Aluminum FoilBroiling Guide CommentsBurner Grates Care and cleaning of the rangeLift-Up Cooktop Tips Consumer SupportControl Panel and Knobs Cleaning Operating Instructions SafetyBurners Oven Shelves and Broiler RackRemovable Oven Bottom Cleaning the Oven BottomCleaning Installation Instructions Broiler Compartment To removeTo remove the door Instructions Safety Broiler Pan and GridLift-Off Oven Door Inside of doorDo not use a steel wool pad it will scratch the surface Porcelain Oven Interior SafetyPainted Surfaces 800.626.2002Commonwealth of Massachusetts Before YOU BeginPart Included For Your SafetyTools YOU will Need Materials YOU MAY NeedInstallation Safety Instructions Dimensions and Clearances ANTI-TIP Device LocationConnect the Range to GAS Provide Adequate GAS SupplyHookup Example Flexible ConnectorRecommended GAS and Electric Supply Location Seal the Openings Light the PilotsIf the Range has Electric Ignition Adjust the Oven Burner AIR Shutter if NecessaryAdjust the Surface Burner Pilots if Necessary For Natural GasReplace Oven Parts If Adjustment is NecessaryQuality of Flames For LP Gas⁄ 8 ″ Install the ANTI-TIP DeviceLevel the Range Model and Serial Number Location When ALL Hookups are CompletedMobile Home Installation Before you call for service… Care and Cleaning Gas Range WarrantyWhat is Not Covered We Will ReplaceConsumer Support GE Appliances Website Schedule ServiceParts and Accessories Real Life Design Studio

JGAS02 specifications

The GE JGAS02 is an advanced gas turbine designed to meet the growing demand for efficient and reliable energy solutions. With a focus on performance and sustainability, the JGAS02 incorporates a series of cutting-edge technologies that enhance its operational capabilities while reducing its environmental footprint.

One of the standout features of the JGAS02 is its high efficiency rating. The turbine boasts an advanced airfoil design that optimizes airflow and enhances combustion efficiency. This results in reduced fuel consumption and lower emissions, making it an ideal choice for power generation in a world increasingly focused on clean energy solutions.

The JGAS02 utilizes a sophisticated control system that allows for precise monitoring and management of its operation. This system is equipped with predictive analytics, enabling operators to anticipate maintenance needs and minimize downtime. This not only increases the reliability of the turbine but also extends its operational lifespan, providing significant cost savings over time.

Another key characteristic of the JGAS02 is its versatility. It can operate with a variety of fuels, including natural gas, biogas, and even liquid fuels, allowing it to adapt to different market needs and regulatory environments. This flexibility makes it a popular choice for both industrial applications and power plants seeking to diversify their energy sources.

In terms of technology, the JGAS02 features state-of-the-art cooling systems that enhance turbine performance while protecting critical components from high temperatures. Proprietary materials and coatings are employed to ensure durability and longevity in demanding operating conditions.

Moreover, the JGAS02's modular design simplifies maintenance and upgrades, making it easier for operators to implement enhancements as technology evolves. This attention to future-proofing aligns with GE’s commitment to providing long-term value to its customers.

Overall, the GE JGAS02 represents a significant advancement in gas turbine technology. With its blend of high efficiency, operational reliability, and environmental sustainability, it is well-positioned to meet the challenges of modern energy production while supporting a transition to a cleaner energy future.
Top Page Image Contents