If the Range has Electric Ignition, For Natural Gas

Installation Instructions

5LIGHT THE PILOTS (cont.)

BAdjust the Surface Burner Pilots if Necessary

1.Raise the cooktop.

2.Use a small flat-bladed screwdriver to turn the adjusting screw (accessed through a hole in the front right side of the burner box).

Pilot adjustment

CAUTION — Make sure the surface burner control knobs are in the OFF position before attempting to adjust the pilots.

3.Observe lit burners. Compare the flames to pictures in the Before you call for service section. If any flame is unsatisfactory, call for service.

4.To avoid pilot outage, slowly lower the cooktop after lighting the pilots.

7LIGHT THE OVEN PILOT (on standing pilot models)

ABe sure the OVEN TEMP knob is in the OFF position.

BOpen the oven door and remove the oven bottom. See the Removable Oven Bottom section in Care and Cleaning.

CFind the oven pilot port at the back of the oven.

DTo light the oven pilot, push in

and hold the OVEN TEMP knob while lighting the pilot with a long match or match in a match holder. Once the oven pilot is lit, continue holding the OVEN TEMP knob in for one minute before releasing.

IF THE RANGE HAS ELECTRIC IGNITION

There are separate ignition devices for the left and right hand surface burners. Both of these ignitors are ON when any knob is turned to the LITE setting. The ignitors will spark as long as any of the top burner knobs are at the LITE setting.

In the event of an electrical power failure, the top burners can still be used. To light a burner, hold a lit kitchen match adjacent to the top burner to be used and turn valve knob to LITE. USE EXTREME CAUTION.

8ADJUST THE OVEN BURNER AIR SHUTTER IF NECESSARY

	Blue flames	1/2″
	Natural gas	Bake/broil
		Bake/broil
	Inner cone	burner
	Inner cone	1″
	of flame	1″
	L.P. gas

For Natural Gas:

The oven burner flame should be a clean, blue flame with distinct inner cones approximately 1/2 inch long.

A soft, lazy flame with indistinct cones means too much gas or not enough air. A noisy lifting flame means too much air.

JGAS02 specifications

The GE JGAS02 is an advanced gas turbine designed to meet the growing demand for efficient and reliable energy solutions. With a focus on performance and sustainability, the JGAS02 incorporates a series of cutting-edge technologies that enhance its operational capabilities while reducing its environmental footprint.

One of the standout features of the JGAS02 is its high efficiency rating. The turbine boasts an advanced airfoil design that optimizes airflow and enhances combustion efficiency. This results in reduced fuel consumption and lower emissions, making it an ideal choice for power generation in a world increasingly focused on clean energy solutions.

The JGAS02 utilizes a sophisticated control system that allows for precise monitoring and management of its operation. This system is equipped with predictive analytics, enabling operators to anticipate maintenance needs and minimize downtime. This not only increases the reliability of the turbine but also extends its operational lifespan, providing significant cost savings over time.

Another key characteristic of the JGAS02 is its versatility. It can operate with a variety of fuels, including natural gas, biogas, and even liquid fuels, allowing it to adapt to different market needs and regulatory environments. This flexibility makes it a popular choice for both industrial applications and power plants seeking to diversify their energy sources.

In terms of technology, the JGAS02 features state-of-the-art cooling systems that enhance turbine performance while protecting critical components from high temperatures. Proprietary materials and coatings are employed to ensure durability and longevity in demanding operating conditions.

Moreover, the JGAS02's modular design simplifies maintenance and upgrades, making it easier for operators to implement enhancements as technology evolves. This attention to future-proofing aligns with GE’s commitment to providing long-term value to its customers.

Overall, the GE JGAS02 represents a significant advancement in gas turbine technology. With its blend of high efficiency, operational reliability, and environmental sustainability, it is well-positioned to meet the challenges of modern energy production while supporting a transition to a cleaner energy future.