Using the surface units.
How to Set
Push the knob in and turn in either direction to the setting you want.
At both OFF and HI the control clicks into position. You may hear slight clicking sounds during cooking, indicating the control is keeping the power level you set.
Be sure you turn the control knob to OFF when you finish cooking. (appearance may vary)
Indicator Lights (on radiant glass models only)
AHOT indicator light will glow when any radiant element is turned on, and will remain on until the surface is cool enough to touch.
ASURFACE UNITS on indicator light will glow when any surface unit is on.
NOTE: The SURFACE UNITS on indicator light may glow between the surface control settings of LO and OFF, but there is no power to the surface units.
Safety Information Operating Instructions Installation Instructions Troubleshooting Tips Customer Service
13