GE 164D4290P024 Special features of your oven control, Safety Instructions, Care and Cleaning

Page 10

Safety Instructions

Special features of your oven control.

Your new touch pad control has additional features that you may choose to use. The following are the features and how you may activate them.

The special feature modes can only be activated while the display is showing the time of day. They remain in the control’s memory until the steps are repeated.

When the display shows your choice, press the START pad. The special features will remain in memory after a power failure.

Operating Instructions

12 Hour Shut-Off

With this feature, should you forget and leave the oven on, the control will automatically turn off the oven after 12 hours during baking functions or after 3 hours during a broil function.

If you wish to turn OFF this feature, follow the steps below.

Press the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.

Press the DELAY START pad. The display will show 12 shdn (12 hour shut-off). Press the DELAY START pad again and the display will show no shdn (no shut-off).

Press the START pad to activate the no shut-off and leave the control set in this special features mode.

Care and Cleaning

Fahrenheit or Celsius Temperature Selection

Your oven control is set to use the Fahrenheit

Press the BROIL HI/LO pad. The

temperature selections but you may change this

display will show F (Fahrenheit).

to use the Celsius selections.

Press the BROIL HI/LO pad again. The

Press the BAKE and BROIL HI/LO pads

display will show C (Celsius).

at the same time for 3 seconds until

Press the START pad.

the display shows SF.

Consumer Support Troubleshooting Tips

Control Lockout

Your control will allow you to lock out the touch pads so they cannot be activated when pressed.

Press the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.

Press the SELF CLEAN pad. The display will show LOC OFF.

Press the SELF CLEAN pad again. The display will show LOC ON.

Press the START pad to activate the control lockout feature and leave the control set in this special features mode.

When this feature is on and the touch pads are pressed the control will beep and the display will show LOC.

NOTE: The control lockout mode will not affect the CLOCK and KITCHEN TIMER ON/OFF touch pads.

10

Image 10
Contents RangesSelf-Cleaning Radiant Write the model and serial numbers here Model # Serial #All ranges can tip and injury could result Important Safety Notice Safety Instructions Operating InstructionsSafety Instructions ConsumerRadiant Surface Units Troubleshooting Tips CareCleaning Using the surface unitsSafety Instructions CareSelecting types of cookware Cleaning Operating Instructions SafetyConsumer Support Troubleshooting Tips InstructionsUsing the oven controls Oven Control, Clock and Timer Features and SettingsSafety Instructions Special features of your oven controlCare and Cleaning Instructions Operating Instructions Care and CleaningTroubleshooting Tips Consumer Support Tones at the End of a Timed CycleBefore you begin… TroubleshootingTips Aluminum FoilInstructions Operating SafetyHow to Set the Oven for Broiling Broiling GuideUsing the clock and timer Consumer Support Troubleshooting Tips CareHow to Set a Delayed Start and Automatic Stop How to Set an Immediate Start and Automatic StopSupport How to Set for Regular Baking/Roasting Troubleshooting Tips Care and CleaningHow to Exit the Sabbath Feature Operating InstructionsTo Adjust the Thermostat Adjust the oven thermostat-Do it yourselfType of margarine will affect baking performance Before a Clean Cycle Using the self-cleaning ovenOperating Instructions Safety How to Set the Oven for CleaningHow to Delay the Start of Cleaning After a Clean CycleControl Knobs Care and cleaning of the rangeHow to Remove Packaging Tape Oven VentControl Panel Safety Instructions OperatingPainted Surfaces Lift-Off Oven DoorCare and Cleaning Operating InstructionsTips Consumer Support Cleaning the glass cooktopSafety Instructions Operating Instructions CareCooktop Seal Instructions SafetyMetal Marks and Scratches Damage from Sugary Spills and Melted PlasticBefore You Call For Service… Problem Possible Causes What To DoBefore You Call For Service … Is on when you want During a clean cycleOpen after a Clean cycle Oven not clean after Crackling orDisplay flashes Power outageDisplay goes blank Unable to getWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration What GE Will Not Cover GE Electric Range WarrantyGE Will Provide Warrantor General Electric Company. Louisville, KYConsumer Support GE Appliances Website Schedule ServiceParts and Accessories Real Life Design Studio

49-80065, 164D4290P024 specifications

The GE 164D4290P024, 49-80065 is a sophisticated and efficient component widely utilized in many applications across various industries. Known for its reliability and performance, it has become a vital part of numerous systems, particularly in the aerospace and defense sectors. This component showcases a blend of advanced technologies and robust designs that set it apart in a competitive market.

One of the standout features of the GE 164D4290P024, 49-80065 is its durability. Designed to withstand extreme environmental conditions, this component is engineered to resist high temperatures, vibrations, and various levels of contamination. Such durability ensures that it can operate reliably in challenging settings, making it suitable for aerospace applications where performance is critical.

The technology employed in the GE 164D4290P024, 49-80065 includes the use of advanced materials that enhance its mechanical properties while reducing weight. Weight reduction is crucial in aerospace, where every ounce matters for fuel efficiency and overall performance. The use of innovative materials not only contributes to its lightweight characteristics but also helps improve its longevity and reliability.

Another significant characteristic of this component is its compatibility with various systems. The GE 164D4290P024, 49-80065 is designed to integrate seamlessly with existing infrastructure, allowing for straightforward installation and operation. Its versatility makes it a preferred choice among engineers who seek dependable solutions that can be adapted to multiple applications without extensive modifications.

In terms of performance, the GE 164D4290P024, 49-80065 delivers consistent results, which is crucial in mission-critical applications. It is engineered to meet stringent performance standards, ensuring that it operates effectively under demanding conditions. This reliability is supported by rigorous testing protocols that confirm its capabilities in various scenarios.

Moreover, the maintenance of the GE 164D4290P024, 49-80065 is designed to be straightforward, reducing downtime and maintenance costs. This ease of maintenance can significantly improve operational efficiency, helping organizations save time and money.

In conclusion, the GE 164D4290P024, 49-80065 is a high-performance component characterized by its durability, advanced technologies, and compatibility with various systems. Its reliability in extreme conditions, lightweight properties, and ease of maintenance make it an invaluable asset in aerospace and defense applications, contributing to enhanced operational efficiency and effectiveness in diverse settings.