GE 164D4290P024 Care and cleaning of the range, How to Remove Packaging Tape, Control Knobs

Page 20

Safety Instructions

Care and cleaning of the range.

Be sure all controls are off and all surfaces are cool before cleaning any part of the range.

If your range is removed for cleaning, servicing or any reason, be sure the anti-tip device is re-engaged properly when the range is replaced. Failure to take this precaution could result in tipping of the range and cause injury.

Operating Instructions

How to Remove Packaging Tape

To assure no damage is done to the finish of the product, the safest way to remove the adhesive left from packaging tape on new appliances is an application of a household liquid dishwashing detergent, mineral oil or cooking oil.

Apply with a soft cloth and allow to soak. Wipe dry and then apply an appliance polish to thoroughly clean and protect the surface.

NOTE: The plastic tape (on some models) must be removed from all chrome trim. It cannot be removed if it is baked on.

Troubleshooting Tips Care and Cleaning

Groove Stem

Molded rib

Spring clip

Clear groove in stem

Flat Stem

Molded flat area

Control Knobs

The control knobs may be removed for easier

check the OFF position to insure proper

cleaning.

placement.

Before removing the knobs for cleaning,

Wash the knobs in soap and water or a

please note that the knobs are in the

vinegar and hot water solution but do

OFF position. When replacing the knobs,

not soak.

 

 

The knob stem has a groove in each

Replace the knob by fitting the molded

side. The groove on one side has a

rib inside the knob into the clear

spring clip. The other groove is clear

groove on the stem.

(see illustration). Check the inside of

 

the knob and find the molded rib.

 

The knob stem is flat on one side (see

Replace the knob by fitting the molded

illustration). Check the inside of the

flat area inside the knob onto the flat

knob and find the molded flat area.

area of the stem.

Flat

Consumer Support

Oven Vent

The oven vent is located behind the right rear surface unit.

This area could become hot during oven use.

It is normal for steam to come out of the vent and moisture may collect underneath it when the oven is in use.

The vent is important for proper air circulation. Never block this vent.

20

Image 20
Contents RangesSelf-Cleaning Radiant Write the model and serial numbers here Model # Serial #All ranges can tip and injury could result Important Safety Notice Safety Instructions Operating InstructionsSafety Instructions ConsumerRadiant Surface Units Troubleshooting Tips CareUsing the surface units SafetyCleaning Instructions CareCleaning Operating Instructions Safety Consumer Support Troubleshooting TipsSelecting types of cookware InstructionsUsing the oven controls Oven Control, Clock and Timer Features and SettingsCare and Cleaning Special features of your oven controlSafety Instructions Instructions Care and Cleaning Troubleshooting Tips Consumer SupportInstructions Operating Tones at the End of a Timed CycleTroubleshooting TipsBefore you begin… Aluminum FoilSafety How to Set the Oven for BroilingInstructions Operating Broiling GuideUsing the clock and timer Consumer Support Troubleshooting Tips CareSupport How to Set an Immediate Start and Automatic StopHow to Set a Delayed Start and Automatic Stop Troubleshooting Tips Care and Cleaning How to Exit the Sabbath FeatureHow to Set for Regular Baking/Roasting Operating InstructionsType of margarine will affect baking performance Adjust the oven thermostat-Do it yourselfTo Adjust the Thermostat Using the self-cleaning oven Operating Instructions SafetyBefore a Clean Cycle How to Set the Oven for CleaningHow to Delay the Start of Cleaning After a Clean CycleCare and cleaning of the range How to Remove Packaging TapeControl Knobs Oven VentSafety Instructions Operating Painted SurfacesControl Panel Lift-Off Oven DoorCare and Cleaning Operating InstructionsCleaning the glass cooktop Safety InstructionsTips Consumer Support Operating Instructions CareInstructions Safety Metal Marks and ScratchesCooktop Seal Damage from Sugary Spills and Melted PlasticBefore You Call For Service… Problem Possible Causes What To DoBefore You Call For Service … During a clean cycle Open after a Clean cycle Oven not clean afterIs on when you want Crackling orPower outage Display goes blankDisplay flashes Unable to getWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration GE Electric Range Warranty GE Will ProvideWhat GE Will Not Cover Warrantor General Electric Company. Louisville, KYSchedule Service Parts and AccessoriesConsumer Support GE Appliances Website Real Life Design Studio

49-80065, 164D4290P024 specifications

The GE 164D4290P024, 49-80065 is a sophisticated and efficient component widely utilized in many applications across various industries. Known for its reliability and performance, it has become a vital part of numerous systems, particularly in the aerospace and defense sectors. This component showcases a blend of advanced technologies and robust designs that set it apart in a competitive market.

One of the standout features of the GE 164D4290P024, 49-80065 is its durability. Designed to withstand extreme environmental conditions, this component is engineered to resist high temperatures, vibrations, and various levels of contamination. Such durability ensures that it can operate reliably in challenging settings, making it suitable for aerospace applications where performance is critical.

The technology employed in the GE 164D4290P024, 49-80065 includes the use of advanced materials that enhance its mechanical properties while reducing weight. Weight reduction is crucial in aerospace, where every ounce matters for fuel efficiency and overall performance. The use of innovative materials not only contributes to its lightweight characteristics but also helps improve its longevity and reliability.

Another significant characteristic of this component is its compatibility with various systems. The GE 164D4290P024, 49-80065 is designed to integrate seamlessly with existing infrastructure, allowing for straightforward installation and operation. Its versatility makes it a preferred choice among engineers who seek dependable solutions that can be adapted to multiple applications without extensive modifications.

In terms of performance, the GE 164D4290P024, 49-80065 delivers consistent results, which is crucial in mission-critical applications. It is engineered to meet stringent performance standards, ensuring that it operates effectively under demanding conditions. This reliability is supported by rigorous testing protocols that confirm its capabilities in various scenarios.

Moreover, the maintenance of the GE 164D4290P024, 49-80065 is designed to be straightforward, reducing downtime and maintenance costs. This ease of maintenance can significantly improve operational efficiency, helping organizations save time and money.

In conclusion, the GE 164D4290P024, 49-80065 is a high-performance component characterized by its durability, advanced technologies, and compatibility with various systems. Its reliability in extreme conditions, lightweight properties, and ease of maintenance make it an invaluable asset in aerospace and defense applications, contributing to enhanced operational efficiency and effectiveness in diverse settings.