GE 49-80065 Safety Instructions Operating, Painted Surfaces, Control Panel, Lift-Off Oven Door

Page 21

 

www.GEAppliances.com

 

 

Painted Surfaces

 

Painted surfaces include the sides of the

Do not use commercial oven cleaners,

range and the door, top of control panel

cleaning powders, steel wool or harsh

and the drawer front. Clean these with soap

abrasives on any painted surface.

and water or a vinegar and water solution.

 

 

 

Control Panel

 

■Clean up splatters with a damp cloth.

■Remove heavier soil with warm

■You may also use a glass cleaner.

soapy water.

■Do not use abrasives of any kind.

 

Safety Instructions Operating

Locked position

Unlocked position

Pull the hinge locks down to the unlocked position.

The gasket is designed with a gap at the bottom to allow for proper air circulation.

Do not rub or clean the door gasket—it has an extremely low resistance to abrasion.

If you notice the gasket becoming worn, frayed or damaged in any way or if it has become displaced on the door, you should have it replaced.

Lift-Off Oven Door

The oven door is removable for easier access to the light bulb.

Do not lift the door by the handle.

To remove the door:

Fully open the door.

Each hinge has a hinge lock. Using a tool, pull the hinge locks down against the door frame.

Firmly grasp the door at the top sides.

Close the door to the stop position.

Lift the door up and pull straight out.

To replace the door:

Firmly grasp the door at the top sides.

This is critical.

Approach the range with the door angled in a vertical position.

Guide the hinges into the slots.

Push door in firmly while opening.

Once in position, open the door completely. Push the hinge locks back in towards the front frame.

To clean the inside of the door:

■Because the area inside the gasket is cleaned during the self-clean cycle, you do not need to clean this by hand.

■The area outside the gasket and the door liner can be cleaned with a soap- filled steel wool or plastic pad, hot water and detergent. Rinse well with a vinegar and water solution.

To clean the outside of the door:

■Use soap and water to thoroughly clean the top, sides and front of the oven door. Rinse well. You may also use a glass cleaner to clean the glass on the outside of the door. Do not let water drip into the vent openings.

■If any stain on the door vent trim is persistent, use a soft abrasive cleaner and a sponge-scrubber for best results.

■Spillage of marinades, fruit juices, tomato sauces and basting materials containing acids may cause discoloration and should be wiped up immediately. When surface is cool, clean and rinse.

■Do not use oven cleaners, cleaning powders or harsh abrasives on the outside of the door.

21

Instructions Care and Cleaning Troubleshooting Tips Consumer Support

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Write the model and serial numbers here Model # Serial # RangesSelf-Cleaning RadiantAll ranges can tip and injury could result Safety Instructions Operating Instructions Important Safety NoticeConsumer Safety InstructionsRadiant Surface Units Tips Care TroubleshootingSafety Using the surface unitsCleaning Instructions CareConsumer Support Troubleshooting Tips Cleaning Operating Instructions SafetySelecting types of cookware InstructionsOven Control, Clock and Timer Features and Settings Using the oven controlsSpecial features of your oven control Safety InstructionsCare and Cleaning Troubleshooting Tips Consumer Support Instructions Care and CleaningInstructions Operating Tones at the End of a Timed CycleTips TroubleshootingBefore you begin… Aluminum FoilHow to Set the Oven for Broiling SafetyInstructions Operating Broiling GuideConsumer Support Troubleshooting Tips Care Using the clock and timerHow to Set an Immediate Start and Automatic Stop How to Set a Delayed Start and Automatic StopSupport How to Exit the Sabbath Feature Troubleshooting Tips Care and CleaningHow to Set for Regular Baking/Roasting Operating InstructionsAdjust the oven thermostat-Do it yourself To Adjust the ThermostatType of margarine will affect baking performance Operating Instructions Safety Using the self-cleaning ovenBefore a Clean Cycle How to Set the Oven for CleaningAfter a Clean Cycle How to Delay the Start of CleaningHow to Remove Packaging Tape Care and cleaning of the rangeControl Knobs Oven VentPainted Surfaces Safety Instructions OperatingControl Panel Lift-Off Oven DoorOperating Instructions Care and CleaningSafety Instructions Cleaning the glass cooktopTips Consumer Support Operating Instructions CareMetal Marks and Scratches Instructions SafetyCooktop Seal Damage from Sugary Spills and Melted PlasticProblem Possible Causes What To Do Before You Call For Service…Before You Call For Service … Open after a Clean cycle Oven not clean after During a clean cycleIs on when you want Crackling orDisplay goes blank Power outageDisplay flashes Unable to getWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration GE Will Provide GE Electric Range WarrantyWhat GE Will Not Cover Warrantor General Electric Company. Louisville, KYParts and Accessories Schedule ServiceConsumer Support GE Appliances Website Real Life Design Studio

49-80065, 164D4290P024 specifications

The GE 164D4290P024, 49-80065 is a sophisticated and efficient component widely utilized in many applications across various industries. Known for its reliability and performance, it has become a vital part of numerous systems, particularly in the aerospace and defense sectors. This component showcases a blend of advanced technologies and robust designs that set it apart in a competitive market.

One of the standout features of the GE 164D4290P024, 49-80065 is its durability. Designed to withstand extreme environmental conditions, this component is engineered to resist high temperatures, vibrations, and various levels of contamination. Such durability ensures that it can operate reliably in challenging settings, making it suitable for aerospace applications where performance is critical.

The technology employed in the GE 164D4290P024, 49-80065 includes the use of advanced materials that enhance its mechanical properties while reducing weight. Weight reduction is crucial in aerospace, where every ounce matters for fuel efficiency and overall performance. The use of innovative materials not only contributes to its lightweight characteristics but also helps improve its longevity and reliability.

Another significant characteristic of this component is its compatibility with various systems. The GE 164D4290P024, 49-80065 is designed to integrate seamlessly with existing infrastructure, allowing for straightforward installation and operation. Its versatility makes it a preferred choice among engineers who seek dependable solutions that can be adapted to multiple applications without extensive modifications.

In terms of performance, the GE 164D4290P024, 49-80065 delivers consistent results, which is crucial in mission-critical applications. It is engineered to meet stringent performance standards, ensuring that it operates effectively under demanding conditions. This reliability is supported by rigorous testing protocols that confirm its capabilities in various scenarios.

Moreover, the maintenance of the GE 164D4290P024, 49-80065 is designed to be straightforward, reducing downtime and maintenance costs. This ease of maintenance can significantly improve operational efficiency, helping organizations save time and money.

In conclusion, the GE 164D4290P024, 49-80065 is a high-performance component characterized by its durability, advanced technologies, and compatibility with various systems. Its reliability in extreme conditions, lightweight properties, and ease of maintenance make it an invaluable asset in aerospace and defense applications, contributing to enhanced operational efficiency and effectiveness in diverse settings.
Top Page Image Contents